• Journal of the Korean earth science society
• /
• v.30 no.4
• /
• pp.454-463
• /
• 2009

In this study, from January 2006 to February 2009, we observed 107 ice spikes formed in a natural state, and analyzed their environment. We developed an experimental device to reproduce ice spikes in laboratory and successfully made 531 ice spikes. We analyzed the process of the formation and the principle of how those ice spikes grow through videotaped data of the formation in the experiment. In the natural world, when the surface of water and the lower part of a vessel begin to freeze, a vent (breathing hole) develops at the surface where an ice is not frozen; this vent serves as the seed of an ice spike. It is assumed that the volume expansion of ice in the vessel which occurs when water freezes makes the supercooled water go upward through the vent and becomes an ice bar called an ice spike. In the laboratory, however, when distilled water is poured into an ice tray cube and kept in the experimental device for about one and a half hours at a temperature of -12- $-13^{\circ}C$, a thin layer of ice then begins to develop on the surface of the water, the vent is formed, and ice spikes form for about 10-30 minutes. These spikes stop growing when the end becomes clogged. Ice spikes can be described as falling into seven categories of shape, with the apex type topping the list followed by the slant type in the natural state and the vertical type predominating in the laboratory.

• Journal of Korean Society of Forest Science
• /
• v.99 no.4
• /
• pp.534-545
• /
• 2010

To examine 1) rainfall pattern (i.e., type and intensity) regulating surface erosion on hillslopes in postwildfire area and 2) its effect on variation in sediment yield along the gradient of severity wildfire regimes and elapsed years, we surveyed the amount of sediment yield with respect to daily or net-effective rainfall in 9 plots in eastern coastal region, Republic of Korea. Before field investigation, all plots classified into three groups: low-, mixed- and high-severity wildfire regimes (3 plots in each group). We found that, with decreasing wildfire regimes and increasing elapsed years, the rainfall type regulating surface erosion changed from daily rainfall to net-effective rainfall (considering rainfall continuity) and its intensity increased continuously. In general, wildfires can destroy the stabilized forest floors, and thus rainfall interception by vegetation and litter layer should be reduced. Wildfires can also decrease soil pores in forest floors, and thus infiltration rates of soil are reduced. These two processes lead to frequent occurrence of overland flows required to surface erosion, and sediment yields in post-wildfire areas should increase linearly with increasing rainfall events. With the decreasing severity wildfire regimes and the increasing elapsed years, these processes should be stabilized, and therefore their sediment yields also decreased. Our findings on variations in sediment yields caused by the wildfire regimes and the elapsed years suggest understanding of hydrogeomorphic and ecologic diversities in post-wildfire areas, and these should be carefully examined for both watershed management and disaster prevention.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.6
• /
• pp.1775-1781
• /
• 2008

The effects of the type of curing agent on the swelling of the natural rubber(NR) sponge applicable to the self-sealing layer of a helicopter fuel tank were investigated. The curing systems employed were peroxide and mixed ones of sulfur and peroxide. The NR compounds were prepared in a kneader and a roll-mill. The compounds were partially cured in a press at high pressure and subsequently cured fully with expansion in another press at atmospheric pressure. The apparent density of the NR sponge was measured and the cell structure was observed with scanning electron microscopy. The swelling experiments were performed at room temperature using toluene, iso-octane, and an aircraft fuel as a solvent. More rapid volume swelling of the NR sponge cured by peroxide was achieved than cured by sulfur and peroxide with similar amount of curing agent added in rubber compounds. The apparent density and cell structure of the sponge were extremely sensitive to the amount of peroxide, which influences again the swelling behavior of the NR sponge. It is important to control properly two reactions of decomposition of foaming agent and crosslinking of NR in the mold to obtain rapid swelling of the NR sponge on contact of the fuel.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.27 no.3
• /
• pp.229-234
• /
• 1982

Environmental factors are known in general to influence much on the development of abscission layer and thereby on shedding of plant parts. The present study was carried out to determine the effect of meterological condition during ripening on the grain shatterability of rice plants at harvest. Different meteorological conditions were obtained by shifting transplanting timing of 40 days old rice seedlings 4 times with a 15 days-interval. Grain shatterability was measured as tensile strength of rice grains: it varied within a range of 214g. to 251g. in a practically non-shattering Japonica variety'Jinheung' and l27.5g. to 204g. in an easy shattering Indica \times Japonica progeny variety'Taeback'. In view of field loss of rice, the variation in tensile strength with time of transplanting and harvest did not matter in Jinheung, but was an important factor in Taeback. In Taeback the tensile strength was significantly correlated positively with mean, maximum and minimum air temperature and relative humidity during a certain period of grain ripening, especially during 30 days period before harvest, but diurnal range of air temperature showed a significant, negative correlation with it. The tensile strength seemed to be more closely related with min. air temperature than max. air temperature, and it was not significantly correlated with radiation amount during any period of pre-harvest. Meteorological effect on grain shatterability may vary with variety, but temperature regime during ripening appears to play major role among the meteorological factors in easy shattering and more thermophilic Indica \times Japonica varieties: lower the temperature, greater the shatterability.

• Microbiology and Biotechnology Letters
• /
• v.48 no.2
• /
• pp.215-222
• /
• 2020

The marine microorganism PX-1, which can hydrolyze xylan, was isolated from coastal sea water of Jeju Island, Korea. Based on the 16S rRNA gene sequence and chemotaxonomy analysis, PX-1 was identified as a species of the genus Aestuariibacter and named Aestuariibacter sp PX-1. From the culture broth of PX-1, an extracellular xylanase was purified to homogeneity through ammonium sulfate precipitation and subsequent adsorption chromatography using insoluble xylan. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis and gel filtration chromatography estimated the molecular weight of the purified putative xylanase (XylA) as approximately 64 kDa. XylA showed xylanase activity toward beechwood xylan, with a maximum enzymatic activity at pH 6.0 and 45℃. Through thin-layer chromatographic analysis of the xylan hydrolysate produced by XylA, it was confirmed that XylA is an endo-type xylanase that decomposes xylan into xylose and xyloligosaccharides of various lengths. The K_m and V_max values of XylA for beechwood xylan were 27.78 mM and 78.13 μM/min, respectively.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.6 no.2
• /
• pp.46-53
• /
• 2003

In order to analyze the movement characteristics of suspended solid(SS) in harbor construction, we investigate the generation and movement processes of the SS for the landfill construction by direct casting method and the grab dredging construction which is the most frequent process in harbor construction. We find that the SS is generated into a very high concentration right after the direct casting of landfill soil and continued up to 60 minutes in the landfill construction using the direct casting method with dredged materials by a ship of 700-tonnage. In the grab dredging construction, the SS is generated in a high density of concentration near at its source regardless of water depth, formed belt and diffused up to 700m along the trajectory of tidal current. Based on the result of the present study, it is recommended for the mitigation of SS generation that the silt protector be deployed near at construction site close enough to block the diffusion of SS and the body length of silt protector be long enough to mitigate the SS diffusion in the bottom layer.

• Journal of Korean society of Dental Hygiene
• /
• v.6 no.4
• /
• pp.387-402
• /
• 2006

This research carried out a survey for 569 students in a junior college of jeollanamdo to provide a needful basic data in developing suitable health promotion program and creating a direction of the oral hygiene education process to intial adult population after holding the oral cavity health action and a affecting factors to it. A collected data obtained the following conclusion. According to school grade, a difference of action factor is Chi-square and Pearson's correlation coeficient in actionfactor and acknowledgement-perception factor and a step-by-step recurrence analysis processed a related factor of the oral health action. 1. A related action factor of the oral health appeared meaningful difference of the oral cavity medical examination, the oral cavity clean device use or not, dental surgery prevention cure or not among the third grade who had the most experience of the oral hygiene education within one year recently. 2. A significant of the oral cavity health acknowledged and perceived and a concern of the oral cavity health, acknowledged the oral cavity health state distribution are the highest in the third grade. 3. According to monthly income, a large income is higher than a small income about self-effects in a relation between the oral cavity health action and acknowledgement-perception factor. the average of a large income is 30.59(${\pm}5.79$). The obstacle of the oral cavity health action is 12.51(${\pm}3.19$). a large income is highest. according to school career, under middle school layer obtained the highest average 16.33(${\pm}3.53$). according to a school year, acknowledge-perception factor of the oral cavity health control of the third grade is the highest(38.81(${\pm}6.25$). 4. In mutual relation between acknowledge-perception factor and the oral cavity health action, a variable constants of meaningful mutual relation are the oral cavity health perception, self-effects, the oral cavity health action obstacle, the oral cavity health action benefit, the oral health action control, aggressive. and they are self-effects, the oral cavity health action in the oral cavity health perception. A significant of the oral cavity health and the oral cavity health action obstacle are the oral cavity health action benefit and the oral cavity health action control. 5. The affecting factors to the oral health action are self-effects, action factor, acknowledged the oral health control.

• Economic and Environmental Geology
• /
• v.44 no.6
• /
• pp.503-511
• /
• 2011

The Upper Devonian Grosmont Formation in northern Alberta, Canada, underlies the erosion unconformity that formed between the Cretaceous and Upper Devonian. The formation is divided into four units on the basis of intercalated shales and showing a typical shelf environment of shallowing-upward. It was possible to separate four units(LG~UG3), considering the seismic interpretation attributes of polarity, continuity, frequency/spacing and amplitude and showing the reflection characteristics of the medium-high amplitude, medium-low frequency, good continuity, and subparallel reflection events. The formation can be interpreted as shelf or platform, based on in-situ core data. However, it is difficult, only with reflection attributes and features, to recognize the boundaries and sedimentary environment of parasequence. Therefore, we try to interprete by parasequence set in this study. The parasequence set was formed by erosion unconformity with systems tracts. The erosion unconformity can be recognized by facies data and karst, erosional surface. Grosmont carbonate deposits ranging from platform and shelf to shelf slope are; by wedge-shaped strata of characterized by complex sigmoid-oblique progradational configurations, reflecting a depositional history of upbuilding and outbuilding in response to sea-level changes. Most of the sedimentary units is interpreted as platforms under regression and lowstand environments that support is evidences. In particular, shale layer at the basal part of the highstand systems tracts represents the regressive to lowstand of sea level.

• Korean Journal of Environmental Biology
• /
• v.23 no.1
• /
• pp.1-20
• /
• 2005

This study aims to investigate the flora of Mt. Gaya National Park, especially focused on the forested wetland vegetation of Danji-bong area. The flora of Mt. Gaya was investigated from April in 2003 to October in 2004. Vascular plants of this area consist of total 465 taxa, 4 hybrids, 12 forma, 75 varieties, 1 subspecies, 373 species, 268 genera, 91 families. It corresponds to 11.4% of totally 4,071 taxa appeared in Korea. Korean endemic plants were composed 11 families, 15 genera, 14 species, 1 variety and totaling 15 taxa. And also actual vegetation structures were analyzed the newly founded forested wetland and natural population Ajuga spectabilis on the Danji-bong area using the vegetation and the species composition by tree layer.

• Analytical Science and Technology
• /
• v.18 no.6
• /
• pp.511-519
• /
• 2005

A method for determination of toluene diisocyanates (TDI) in toluene diisocynate (TDI)-based polyurethane (PUR) packing material was investigated, and also the migration of TDI to food was studied. TDI was extracted using food simulants such as n-haptane and 4% aqueous acetic acid. The determinations were performed using gas chromatography/mass spectrometry (GC/MS). One of major components for polyurethane, toluene diisocyanates, were detected in ten samples among twenty six food contact materials with the concentration range of $0.51{\sim}60.88{\mu}g/ml$. However the highest extracted amount was just 0.7% of $60.88{\mu}g/ml$ if the contact surface of food packing for extracting liquid was limited to the outer layer without exposure of the cutting edge of food packing multi-layers. The result of this study and the analysis method for TDI diisocyanate will be very useful for further study about food contact material, and the monitoring result could be used for evaluating the safety of food contact material before it is to be used for food, preservation.