• The Journal of Engineering Geology
• /
• v.7 no.2
• /
• pp.113-126
• /
• 1997

Electrical resistivity methods of dipole - dipole array profiling and Schiumberger array sounding were tested on a segment of the Woraksan granitic batholith for the research into the imaging of irregular attitudes of fracture zones in the crystaaline rock in terms of processing and interpretation schemes. By the dipole - dipole array method, inhomogeneities such as small scale of fracture zones were properly delineated down at some depth even within hard rock environment. Fracture zones were interpreted to be at the boundaries between the high amplitude zone and very low amplitude zone in the resistivity plot and they were also successfully outlined in two - dimensional layer and pseudo - three - dimensional volume constructed by the incorporation of vertical sounding data. The surface location of the fracture zones was correlated by the zero - crossing point in the VLF(very low frequency) electromagnetic data. Pseudo - three - dimensional attitudes of fracture zones were efficiently illuminated by optimum projection angle. The mean of bulk resistivity for the Woraksan granite and the near fracture zones is estimated to be approximately of 4,000 ohm - m which is much higher than the value of 700 ohm - m for the Rwachunri limesilicate environment. This difference is due to both the rock type, i.e., biotite granite vs limesilicate, and the occurrence of secondary openings of fold and fault associated with the intrusion of granite. In this study statistical analyses on the resistivity color plot were performed in terms of three representative statistical moments, i.e., standard deviation, skewness, and kurtosis. The fracture zones in the standard deviation plot were characterized by the higher value, compared to the value of homogeneous portion. The upper boundary of the high resistivity zone was also successfully delineated in the skewness and kurtosis plots.

• The Journal of Engineering Geology
• /
• v.29 no.4
• /
• pp.553-563
• /
• 2019

In order to survey archaeological sites, drilling and excavation are carried out at the final stage. However, at the preliminary stage, non-excavation geophysical prospection is used for assessing underground archaeological ruins. Among the geophysical prospecting techniques, Ground Penetration Radar (GPR) prospection has effectively been applied to historical sites due to its high resolution at shallow depths. In this study, the GPR prospection was conducted to find underground ruins near Suseong-Dang, the place of ancient rituals in Buan area, Korea. First, the GPR prospection was conducted at three sites (Site-1, 2, and 3), and subsequently, the GPR prospection was carried out at Site-3 in more detail. As a result of the prospection, the underground layered structure of the survey area consists of three layers, which are soil layer, weathered rock, and sound rock from the surface. And the GPR anomaly to the archaeological structure was clearly identified at around 100-cm depth showing est-west direction that is parallel to the long-axis array. This GPR anomaly of irregular geomorphological features and intermittent distribution may be related to the ritual remains found in Suseong Dang. The GPR prospection could be effectively used to detect archaeological sites or remains buried in the ground.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.1
• /
• pp.53-62
• /
• 1987

High power lasers provide a controllable and precise energy source in surface transformation hardening. A careful control of the process is needed in order that the surface layer of the material reaches the austenizing temperature, but that it does not melt. In order to achieve this the results of theoretical and experimental studies on the laser surface hardening of a medium carbon steel are described. A two-dimensional computer program, which can be used generally for the determination of transient temperature distributions in welding and heat treatment, was established on the basis of the finite element method. For the confirmation of the accuracy of the numerical analysis, a medium carbon steel (SM 45C) of 5mm thickness was heat-treated with a 1kW CW CO$_{2}$ laser machine, while the traverse speed and the distance from the focal point (defocused distance) were varied. Experimental and numerical results showed a similar tendency in correlations between the hardened zone shape and the process parameters. With increasing beam spot diameter the width and depth of the hardened zone increased for relatively small beam spot diameters, but decreased rapidly after reaching the maximum value, while with increasing traverse speed the width and depth of the hardened zone decreased monotonously. Too small beam spot diameters are to be avoided, since the surface melting would lower the surface hardness and produce an uneven surface which may be unacceptable because of the possible requirement for subsequent machining. It could be observed that for a given traverse speed and laser power input there exists a optimal range of the beam spot diameter, which produce a large width of the hardened zone but no melting on the surface.

• Journal of Wetlands Research
• /
• v.2 no.1
• /
• pp.19-29
• /
• 2000

The physico-chemical characteristics of core sediment, community dynamics of Salix species during the sedimentation were investigated in 1990~1997 for the purpose of inquiry to reveal the effects of terrestrialization on the environment and plant community in a natural wetland. The study site, Paksil-nup wetland was a valley blocked lake located near Hwang-River, Hapcheon-gun, Gyeongsangnam-do, Korea. The values of conductivity, organic matter, total nitrogen, exchangeable K, and exchangeable Ca were higher, and pH was lower in the upper layer of the core sediment. Soil properties such as available phosphorus, exchangeable Ca, exchangeable Na increased, and organic matter, total nitrogen, exchangeable K decreased during the sedimentation. Salix nipponica was the dominant species, and Salix glandulosa was subdominant among 10 Salix species. Sahx species were supposed to be the pioneer plants in shrub and tree layers during the succession in Paksil-nup wetland. Age class of SaliX species community from the epilittoral zone to the infralittoral zone were low, and age of Saljx species distributed from 2 years to 11 years. DBH, height, mean number of branches, number of herb species, and light intensity were increased, whereas density was decreased from a lower age to a higher age community. Salix nipponica was superior than Sahx purpurea var. japonica and other Salix species during the interspecific competition among Salix species.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.14 no.3
• /
• pp.280-283
• /
• 1985

Lipid fractions of the roots of cultured (five years old) and wild (eight years old) Codonopsis lanceolata were analyzed. The most abundant fraction of the lipids extracted from cultured and wild roots of C. lanceolata was neutral lipid and the next came phospholipid and glycolipid in descending order. The percentage, however, of the neutral lipid in total lipid was comparatively low, while that of phospholipid, particularly high; 41.30% and 29.34% in that of cultured and wild one respectively. The richest fraction of neutral lipid was triglyceride; 39.49% and 32.88% in the cultured and the wild respectively, and followed by sterol esters and free acid. Noticed amounts of sterol esters and monoglycerides which is able to be used as an emulsifiers, were contained in the neutral lipid of roots; 27.74% and 5.11% respectively. The unsaturated fatty acid fraction of the total lipid hydrolyzate contained in cultured and wild C. lanceolata roots was 72.87% and 74.37% respectively. The main fatty acid contained in the total lipid hydrolyzate was linoleic acid, and followed by linolenic acid palmitic acid. The main saturated fatty acid was palmitic acid and lauric acid.

• Korean Journal of Food Science and Technology
• /
• v.30 no.2
• /
• pp.379-384
• /
• 1998

Biodegradable carrageenan films and carrageenan-coated papers were developed and their characteristics of lipid permeation was investigated for possible substitution of PE-coated papers used in packaging of oily or greasy foods. Both carrageenan coated papers and free carrageenan films were highly resistant to lipid penetration. Among the carrageenans tested, ${\kappa}-carrageenan$ film showed the most resistant followed by ${\lambda}-$ and i-carrageenan films. The resistance to lipid increased as the thickness of ${\kappa}-carrageenan$ layer increased. Carrageenan coated papers with $4\;and\;5\;kg/ream\;(278m^2)$ showed the lipid resistance comparable to that of the PE-coated paper. Free films also showed the same trends of the lipid resistance as the carrageenan coated papers, but the degree of lipid resistance was approximately ten times higher than that of carrageenan coated paper. Degree of lipid penetration of carrageenan films and carrageenan-coated papers increased exponentially against time. ${\kappa}-carrageenan$ coated papers over 4 kg/ream showed to have an adequate lipid barrier property for being utilized for packaging greasy food products.

• Journal of Korea Water Resources Association
• /
• v.43 no.12
• /
• pp.1029-1038
• /
• 2010

In meteorology Korea has 2/3 of rain of annual total rainfall at the month of Jun through Sept and it has possibility to have serious flood damage because geographically it is composed of mountainous area with steep slope which account for 70% of its country. Also, the increase of impervious layer due to industrialization and urbanization causes direct runoff, which deteriorates contamination of rivers by moving the contaminated material on the surface at the beginning of rain. In particular, the area of leisure facilities needs the management of water quality absolutely because dense population requires space of park function and place to relax and increases moving capability of non-point pollution source. For disposition of rainfall & runoff, the standard of initial rainfall, which is to be used for the computation of disposition volume, is significant factors for the runoff study of non-point pollution source, Until now, a great deal of study has been done by many researchers. However, it is the current reality that the characteristics of runoff varies according to land protection comprising river basin and the standard of initial rainfall by each researcher is not clearly defined yet. Therefore, in this research, it is suggested that, with the introduction of SOM (Self-Organizing Map), the standard of initial rainfall be determined after analyzing each sectional data by executing pattern classification about runoff and water quality data measured at the test river basin for this research.

• Journal of Environmental Science International
• /
• v.20 no.7
• /
• pp.829-837
• /
• 2011

A study on the grain size change, sedimentary facies and age indicator of volcanic tephra was analysis through four cores (P1 ~ P4) at the Ulleung Basin in the East Sea of Korea. The two cores (P1 and P2) were collected in the northeastern side of the Ulleung Basin (about 2,000 m in water depth), while the other two cores (P3 and P4) with the water depth of about 1,500 m and 1,700 m, respectively, were collected from the continental slope of the southwestern and western side of the Ulleung Basin. Four sedimentary facies and eight sedimentary subfacies were identified. The four facies were massive sand, bioturbated mud, homogeneous mud, and laminated mud. The eight subfacies were further divided as pumiceous ash massive sand, scorieaous massive sand, plain bioturbated mud, pyrite filamented bioturbated mud, distinctly laminated mud, indistinctly laminated mud, thinly laminated mud and homogeneous mud. The homogeneous mud was not found in the core of P3 which is located in the western side of Ulleung Basin (close to the Korean coast). In the case of laminated mud facies, the thinly laminated mud facies was dominated in the lower part of core sequences of the Ulleung Basin (P1 and P2), while the indistinctly laminated mud were overally distributed in the core sequences from the continental slope of Ulleung Basin. The Tephra layers from the core sequences of central Ulleung Basin were more dominated and distinctive than those from the core sequences of continental slope. This is related to the distance from the volcanic source and the amount of sediment supply. The core locations of Ulleung-Oki Tephra layers in the central Ulleung Basin were in the upper part of core sequences, while those in the continental slope were in the lower part of core sequences. This is indicated that the amounts of sediment supply in the continental slope after the Ulleung-Oki eruption were very high and different sedimentary environment between upper and lower of Tephra layer.

• Journal of fish pathology
• /
• v.4 no.2
• /
• pp.79-85
• /
• 1991

In Feb., 1990 an epizootic disease to masu salmon fry, Oncorhynchus masou cultured at the hatchery of rainbow trout in Samchok, Kwangwon-do have broken out and induced high mortality over 70%. Externally, the diseased fish showed dark discoloration, abdominal distension with ascites, slight exophthalmus and fecal casts. Internally, the gill and the liver of diseased fish were edematous and pale, and the stomach of moribund fish contained the milkish fluid. Microscopically there was extensive necrosis of the hematopoietic tissue in kidney and spleen, and scattered necrosis of pancreas, liver and lateral muscle. Especially, the necrosis of lamina propria, muscle layer and tela submucosa in the digestive tract known as the typical signs associated with infectious hematopoietic necrosis virus was seen clearly.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.17 no.2
• /
• pp.63-68
• /
• 2007

A number of process problems should be solved in the multi-layered ceramic devices such as EMI filter. In particular, it is essential to control the sintering shrinkage in co-firing of different materials for obtaining defect-free samples such as crack, camber, and delamination which usually occur near the surface and interface. We studied the effect of the powder properties of ferrite on the co-firing behavior of green ceramic layers composed of ferrite and varistor. Three kind of ferrite powder samples as a function of milling time (24, 48, and 72 hr) were prepared. Varistor and ferrite ceramic green sheet were made by means of doctor blade process using slurry (ceramic powder and binder solution). Here, slurry was prepared by mixing 55 wt% powder with 45wt% binder solution. Varistor and ferrite green sheets were laminated at $80 kg/cm^2$, and co-fired at $900^{\circ}C$ and $1000^{\circ}C$ for 3 hr. We obtained the camber-free and co-fired ferrite/varistor layer structure by controlling the milling time and sintering temperature.