• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 추계총회 및 학술대회 논문집
• /
• pp.58-59
• /
• 2012

Surface hardening mechanism of H13 steel was investigated when ion niriding after shot peening process was applied. Severe plastic deformation induced nanocrystallized grains at surface region. Higher nitrogen concentration was achieved in ion nitrided specimen with shot peening treatment than in single nitrided specimen. The elemental mapping on chromium and nitrogen by TEM-EELs showed chromium dissolved in matrix enhanced bulk nitrogen diffusion at surface region. Higher nitrogen diffusion also caused lattice distortion. Nano-sized grains, higher nitrogen concentration, and lattice diffustion contributed to the surface hardening.

• 지질공학
• /
• 제30권3호
• /
• pp.237-251
• /
• 2020

본연구는 H형강 대체 지보재로 개발된 고강도 격자지보재의 성능을 평가하기 위하여 터널에서의 지보재에 대한 구조해석과 계측에 의한 터널 변위와 지중응력 변화를 살펴보았다. 터널 지보재 3차원 비선형 구조해석 결과에 의하면, H형강과 고강도 격자지보재의 하중과 변위 관계는 거의 동일한 거동을 보였으며, 고강도 격자지보재의 최대하중은 H형강보다 1.0~1.2배 크게 나타났다. 터널 지보재 3차원 터널단면해석 결과에 의하면, 축력은 터널 좌측 및 우측 하단부에서 크게 발생했으며 현장시험 계측값과 유사한 경향을 나타냈다. 천단침하 및 내공변위 계측결과에 의하면, 터널 내 강지보(H형강)와 고강도 격자지보 구간의 최종변위량은 1차 관리기준인 23.5 mm 이내의 큰 차이 없이 일정한 값으로 수렴되었다. 지중변위 계측 결과에 의하면, 두 지보재 구간의 최종변화량은 미소한 변위 변화를 보였으나, 1차 관리기준인 10 mm 이내의 일정한 값으로 수렴되었다. 숏크리트 및 강지보 응력 계측 결과에 의하면, 두 지보재 구간의 최종변화량은 미소한 응력 변화를 보였으나, 1차 관리기준인 81.1 kg/㎠과 54.2 tonf 이내의 일정한 값으로 수렴되었다. 결과적으로 강지보재와 고강도 격자지보재가 설치된 터널구간에서 계측 결과는 매우 미미한 차이를 나타냈으며, 이것은 H형강 대신 고강도 격자지보재를 터널에 적용하더라도 구조적으로 충분히 안정성을 확보할 수 있음을 의미한다.

• 대한토목학회논문집
• /
• 제32권5C호
• /
• pp.221-229
• /
• 2012

NATM터널의 안정성 확보를 위해 지반조건이 불량한 경우 숏크리트에 격자지보나 H형강 등의 강지보를 보강하는 경우가 많다. 그러나 설계 시 강지보를 숏크리트가 경화되기 전 임시지보재로 간주하여 수치해석 시 고려하지 않는 것이 일반적이며, 수치해석에 고려하더라도 모델링 방법이 다양하다. 본 연구에서는 휨강도실험, 압축강도실험, 그리고 실대형실험을 통하여 강지보와 숏크리트 합성부재의 거동과 하중 부담률을 분석하였다. 또한 실험과 같은 조건에서 숏크리트와 강지보의 고려방법을 달리하여 수치해석을 실시하여 실험결과와 비교분석하였다. 연구결과 숏크리트와 강지보는 경계면에서의 미끄러짐(slip)으로 인하여 일체로 거동하지 않으며, 수치해석 시 휨모멘트는 강지보가 모두 부담하고 축력은 숏크리트와 강지보가 압축강성비에 따라 분담하는 것으로 고려하는 것이 적절한 것으로 평가되었다.

• 터널과지하공간
• /
• 제18권3호
• /
• pp.226-238
• /
• 2008

숏크리트의 지보성능을 보완하기 위해 사용되는 강지보재는 매우 효과적인 것으로 평가되지만 강지보재 종류별 성능이 파악되지 못하여 설계에 제대로 반영하지는 못하고 있다. 본 연구에서는 여러 가지 강지보재에 의해 보강된 숏크리트의 특성을 휨인성 시험을 통하여 파악하고, 그 결과를 수치해석에 반영하고자 하였다. 시험결과 철근보강 숏크리트는 H 형강이나 격자지보에 비해 지보능력이 다소 못 미치는 것으로 나타났는데, 이는 시험체가 휨인장 파괴를 유도하기에는 다소 짧아서 전단파괴가 발생하였기 때문인 것으로 나타났다. 수치해석을 이용한 안정성 해석 시 숏크리트와 강지보재를 별도로, 그리고 이들 복합체에 대한 등가물성을 구하여 각각 해석한 바 두 결과가 잘 일치하여 등가물성을 이용한 복합체 해석으로도 간편하게 강지보재의 효과를 모사할 수 있었다.

• 한국공간구조학회논문집
• /
• 제18권4호
• /
• pp.123-130
• /
• 2018

U-flanged truss beam is composed of u-shaped upper steel flange, lower steel plate of 8mm or more thickness, and connecting lattice bars welded on the upper and lower sides. The hybrid beam with U-flanged steel truss is made in the construction site through pouring the concrete, and designated as U-flanged truss hybrid beam. In this study the structural experiments on the 4 hybrid beams with the proposed basic shapes were performed, and the flexural capacities from the tests were compared with those from the theoretical approach. The failure modes of each specimen were quite similar. The peak load was reached with the ductile behavior after yielding, and the failure occurred through the concrete crushing. The considerable increasement of deformation was observed up to the concrete crushing. The composite action of concrete and steel member was considered to be reliable from the behavior of specimens. The flexural strength of hybrid beam has been evaluated exactly using the calculation method applied in the boubly reinforced concrete beam. The placement of additional rebars in the bottom instead of upper side is proposed for the efficient design of U-flanged truss hybrid beam.

• 방사성폐기물학회지
• /
• 제18권4호
• /
• pp.481-496
• /
• 2020

After nuclear power plants are permanently shut down and decommissioned, the remaining irradiated metal components such as stainless steel, carbon steel, and Inconel can be used as neutron absorber. This study investigates the possibility of reusing these metal components as neutron absorber materials, that is burnable poison. The absorption cross section of the irradiated metals did not lose their chemical properties and performance even if they were irradiated over 40-50 years in the NPPs. To examine the absorption capability of the waste metals, the lattice calculations of WH 17×17 fuel assembly were analyzed. From the results, Inconel-718 significantly hold-down fuel assembly excess reactivity compared to stainless steel 304 and carbon steel because Inconel-718 contains a small amount of boron nuclide. From the results, a 20wt% impurity of boron in irradiated Inconel-718 enhances the excess reactivity suppression. The application of irradiated Inconel-718 as a burnable absorber for SMR core was investigated. The irradiated Inconel-718 impurity with 20wt% of boron content can maintain and suppress the whole core reactivity. We emphasize that the irradiated metal components can be used as burnable absorber materials to control the reactivity of commercial reactor power and small modular reactors.

• 소성∙가공
• /
• 제32권5호
• /
• pp.287-293
• /
• 2023

This study aims to develop a computational framework based on the finite element method for modeling the hydrogen embrittlement in martensitic steel. The hydrogen embrittlement is a well-known phenomenon, in which the hydrogen penetrates into the surface, flows through the microstructure and finally leads to pre-mature fracture under external or internal stresses. The current numerical model takes into account the effect of hydrogen on the plasticity and failure behavior of martensitic steel under various stress states. This allows for the construction of a failure criterion that accounts for conventional stress states and hydrogen concentration. The developed model is capable of simulating hydrogen diffusion through the lattice based on the distribution of hydrostatic stress. Additionally, it can calculate the hydrogen concentration in trapped sites, such as dislocations, using a local equilibrium assumption, often referred to as Oriani's equilibrium. The developed model parameters are identified through the tensile tests with and without hydrogen environment, and the performance of model can be validated by analyzing fractured automotive part in the hydrogen environment.

• Metals and materials international
• /
• 제24권6호
• /
• pp.1394-1402
• /
• 2018

This study investigates the mechanism of MnS precipitation on $Al_2O_3-SiO_2$ inclusions during the solidification of non-oriented silicon steel, especially the influence of the phase structures and sizes of the oxides on the MnS precipitation, by scanning electron microscopy and transmission electron microscopy coupled with energy dispersive spectrometry. The investigation results show that MnS tends to nucleate on submicron-sized $Al_2O_3-SiO_2$ inclusions formed by interdendritic segregation and that it covers the oxides completely. In addition, MnS can precipitate on micron-sized oxides and its precipitation behavior is governed by the phase structure of the oxides. The MnS embryo formed in a MnO-containing oxide can act as a substrate for MnS precipitation, thus permitting further growth via diffusion of solute atoms from the matrix. MnS also precipitates in a MnO-free oxide by the heterogeneous nucleation mechanism. Furthermore, MnS is less prone to precipitation in the $Al_2O_3$-rich regions of the $Al_2O_3-SiO_2$ inclusions; this can be explained by the high lattice disregistry between MnS and $Al_2O_3$.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2000년도 추계학술대회 논문집
• /
• pp.66-69
• /
• 2000

In order to analyze the densification behaviour of stainless steel powder compacts during hot isostatic pressing (HIP) at elevated temperatures, a power-law creep constitutive model based on the plastic deformation theory for porous materials was applied to the densification. Various densification mechanisms including interparticle boundary diffusion, grain boundary diffusion and lattice diffusion mechanisms were incorporated in the constitutive model, as well. The power-law creep model in conjunction with various diffusion models was applied to the HIP process of 316L stainless steel powder compacts under 50 and 100 MPa at 1125 $!`\acute{\dot{E}}$. The results of the calculations were verified using literature data It could be found that the contribution of the diffusional mechanisms is not significant under the current process conditions.

• 열처리공학회지
• /
• 제9권3호
• /
• pp.205-211
• /
• 1996

Structural studies have been performed on precipitation hardening discovered in $Ll_2$-ordered $Ni_3$(Al,Cr) containing 0.2 and 0.5 mol% of carbon in terms of transmission electron microscopy(TEM). By aging at temperatures around 1073 K after solution treatment at 1423 K, fine polyhedral precipitates appear firstly on the dislocations and then in the matrix. The selected area electron diffraction (SAED) studies revealed that these particles are a $M_{23}C_6$ type carbide which has the cube-cube orientation relationship with the matrix lattice. Weak-beam electron microscopy observations of deformation induced dislocations suggested that the dislocations bypass the carbide particles during deformation.