• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 봄 학술발표회 논문집
• /
• pp.83-90
• /
• 2002

Prying action caused by the eccentric loads within the equipment itself and the anchors can result in a lack of adequate stiffness and strength within the equipment and in additional moment loadings on the anchors. A typical case of prying action often found in power plants is the angle type anchorage system with expansion bolt. Experimental and analytical studies were performed to investigate the relationship between the amplification factors and various geometrical and material factors. It is revealed that the value of the factor is effected by the stiffness of bolt and angle, lateral stiffness of cabinet, and geometrical parameter of anchor system.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 추계학술대회논문집; 한국과학기술회관; 6 Nov. 1997
• /
• pp.138-144
• /
• 1997

The analysis of lateral hydrodynamic forces from the compressor labyrinth seals is presented. The basic equations are derived using a two-control-volume model for compressible flow. Blasius' wall friction-factor formula and jet flow theory are used for the calculation of the wall shear stresses and the recirculation velocity in the cavity. Linearized zeroth-order and first-order perturbation equations are developed for small motion about a centered position by an expansion in the eccentricity ratio. Integration of the resultant first-order pressure distribution along and around the seal defines the rotordynamic coefficients of the labyrinth seal. The rotordynamic analysis for the balance drum labyrinth seal of an ethylene refrigeration compressor is carried out. The results of rotordynamic characteristic of the labyrinth seal and comparisons with other types of seal, honeycomb seal and smooth seal, are presented.

• Structural Engineering and Mechanics
• /
• 제40권2호
• /
• pp.215-231
• /
• 2011

The axial compressive strength of unidirectional FRP is generally quite lower than its axial tensile strength. This fact decreases the advantages of FRP as main load bearing member in engineering structure. In order to restrain the lateral expansion and splitting of GFRP, and accordingly heighten its axial compressive bearing capacity, a project that to confine GFRP pole with surrounding CFRP sheet is suggested in the present study. The Experiment on the CFRP sheet confined GFRP poles showed that a combined structure of high bearing capacity was attained. Basing on the experiment research a theoretical iterative calculation approach is suggested to predict the ultimate axial compressive stress of the combined structure, and the predicted results agree well with the experimental results. Then the influences of geometrical parameters on the ultimate axial compressive stress of the combined structure are also analyzed basing on this approach.

• 한국수자원학회논문집
• /
• 제44권10호
• /
• pp.787-795
• /
• 2011

본 연구는 기후변화에 따른 극한홍수 저감을 위한 하나의 방안으로서 농경지의 저류지화를 통한 홍수저감 방안에 대한 정책 연구이다. 이를 위해 하천의 횡적 공간을 확보하여 저류지로 활용하는 방안을 제안하며 실효성 검증을 위해 낙동강구미 상류지역을 대상지로 선정하여 극한홍수에 대한 홍수저감효과를 분석하였다. 홍수저감효과분석에는 LISFLOOD 모델이 사용되었으며 과거 침수이력이 있는 농경지를 저류지로 활용 하였을 경우 500년 빈도 홍수 발생 시 최대 약 0.53 m의저감효과가있는것으로나타났다. 대상농경지의저류지화를위해해외선진사례분석을통한다각적공간확보방안들이 검토되었으며 그 중 평상시 활용가능성, 비용효과, 토지의 공공성 확보와 계약과 보상에 따른 마찰 등을 고려하여 지역권 설정 및 재해보상제를 활용한 방안들이 대안으로 제시되었다. 또한 낙동강 대상지에서의 토지매수제와 지역권 설정을 통한 공간확보 비용을 비교하였다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제36권2호
• /
• pp.111-122
• /
• 2013

본 연구는 디지털방사선장비에서 자동노출제어장치 사용 시 초점-검출기간의 거리, 관전압, 구리필터의 조합을 이용해 환자의 피폭을 감소하고자 시행 하였다. 경추, 요추측면검사, 두개골 전후검사법을 대상으로 관전 압은 60~100 kV, 초점-검출기간의 거리는 100~200 cm으로 변화시키고 구리필터를 추가하면서 입사선량을 측정하고 영상을 평가하였다. 입사선량은 경추측면검사에서 90 kV, 0.3 mmCu, 200 cm일 경우에 0.06 mGy, 요추측면검사에서는 100 kV, 0.3 mmCu, 200 cm일 경우 0.40 mGy, 두개골전후검사에서는 90 kV, 0.3 mmCu, 140 cm일 경우 0.24 mGy로 가장 낮았다. 입사선량은 0.1 mmCu, 150 cm, 70 kV (경추측면검사), 81 kV (요추측면검사)로 변화 시켰을 경우에 가장 큰 폭으로 감소했다. 초점-검출기간의 거리가 늘어날수록 영상의 확대가 줄었고 180 cm 이상에서는 차이가 적었다. 두개골전후검사에서는 80 kV, 0.1 mmCu, 120 cm으로 변화했을 경우에 입사선량이 가장 많이 감소했다. 따라서 자동노출제어장치를 사용할 시 영상의 품질을 고려한 범위에서 최대한 높은 관전압을 사용하고 초점-검출기간의 거리는 검사실의 구조, 방사선사의 신체조건을 감안하여 선 검사대(Wall)에서는 150~200 cm, 누운 검사대(Table)에서는 120~140 cm으로 늘리고 0.1~0.3 mm Cu의 부가필터를 적절히 조합하여 사용하는 것이 영상의 왜곡 방지와 입사선량을 감소시켜 환자의 피폭을 줄일 수 있을 것이다.

• Journal of Periodontal and Implant Science
• /
• 제36권2호
• /
• pp.345-359
• /
• 2006

Loss of maxillary molar teeth leads to rapid loss of crestal bone and inferior expansion of the maxillary sinus floor (secondary pneumatization). Rehabilitation of the site with osseointegrated dental implants often represents a clinical challenge because of the insufficient bone volume resulted from this phenomenon. Boyne & James proposed the classic procedure for maxillary sinus floor elevation entails preparation of a trap door including the Schneiderian membrane in the lateral sinus wall. Summers proposed another non-invasive method using a set of osteotome and the osteotome sinus floor elevation (OSFE) was proposed for implant sites with at least 5-6mm of bone between the alveolar crest and the maxillary sinus floor. The change of grafted material in maxillary sinus is important for implant survival and the evaluation of graft height after maxillary sinus floor elevation is composed of histologic evaluation and radiomorphometric evaluation. The aim of the present study was radiographically evaluate the graft height change after maxillary sinus floor elevation and the influence of the graft material type in height change and the bone remodeling of grafts in sinus. A total of 59 patients (28 in lateral approach and 31 in crestal approach) who underwent maxillary sinus floor elevation composed of lateral approach and crestal approach were radiographically followed for up to about 48 months. Change in sinusgraft height were calculated with respect to implant length (IL) and grafted sinus height(BL). It was evaluated the change of the graft height according to time, the influence of the approach technique (staged approach and simultaneous approach) in lateral approach to change of the graft height, and the influence of the type of graft materials to change of the graft height. Patients were divided into three class based on the height of the grafted sinus floor relative to the implant apex and evaluated the proportion change of that class (Class I, in which the grafted sinus floor was above the implant apex; Class II, in which the implant apex was level with the grafted sinus floor; and Class III, in which the grafted sinus floor was below the implant apex). And it was evaluated th bone remodeling in sinus during 12 months using SGRl(by $Br\ddot{a}gger$ et al). The result was like that; Sinus graft height decreased significantly in both lateral approach and crestal approach in first 12 months (p$MBCP^{TM}$ had minimum height loss. Class III and Class II was increased by time in both lateral and crestal approach and Class I was decreased by time. SGRI was increased statistically significantly from baseline to 3 months and 3 months(p<0.05) to 12 months(p$ICB^{(R)}$ single use, more reduction of sinusgraft height was appeared. Therefore we speculated that the mixture of graft materials is preferable as a reduction of graft materials. Increasing of the SGRI as time goes by explains the stability of implant, but additional histologic or computed tomographic study will be needed for accurate conclusion. From the radiographic evaluation, we come to know that placement of dental implant with sinus floor elevation is an effective procedure in atrophic maxillary reconstruction.

• 대한치과교정학회지
• /
• 제22권3호
• /
• pp.531-556
• /
• 1992

The majority of the commonly used protraction headgears for the protraction of small and/or retropositioned maxilla not allow a change in the point of force application or direction of the force delivery to attain predictable results because of the position of the upper and lower lips to avoid discomfort to the patient. The purpose of this study was to investigate the initial reaction of maxillofacial complex according to the change of force variables such as direction and point of force application with designing an antenna type-modified protraction head gear. A macerated human skull with well aligned upper teeth was used to experimental model and the investigation was done by double exposure holographic interferometry. Fringe patterns of each protraction conditions were compared and analized. The results were as follows. (Frontal view) 1. The Counterclockwise rotation of the maxilla was showed by parallel protraction to occlusal plane and the fringe was decreased in number as higher point of force application. 2. Generally, the number of fringe was increased in 500gm of protraction force than in 300gm. 3. When apply the protraction force to the maxilla with rapid palatal expansion, the direction of fringe patterns was differed from the protraction without expansion. 4. In most of cases, the counterclockwise rotation was decreased in case of the direction of the force is $20^{\circ}$ downward to occlusal plane compared to the parallel direction. 5. At the point of force application is 15mm above and the direction of force is 20 downward to occlusal plane , the translation of the maxillary complex was showed. (Lateral view) 6. The direction of fringe patterns of the facial bones were differed each other by the sutures, and showed almost parallel when apply the 300gm and 500gm of protraction force. 7. In case of rapid palatal expansion with protraction of the maxilla, the fringe patterns between the maxillary area and the area from the posterior of the maxillary first molar to the pterygomaxillary fissure were differed. In case without rapid palatal expansion, the changes of direction and point of the force application did not affect to the direction and the number of the fringe patterns.

• 대한구순구개열학회지
• /
• 제2권1_2호
• /
• pp.29-41
• /
• 1999

구순구개열은 악안면의 선천기형중 발생빈도가 가장 높은 것으로 알려져 있으며,출생시부터 성장이 완료되는 시기까지 일관된 치료계획에 의한 종합적인 진료체계가 필수적이다. 구순구개열이 존재할 경우 구개부의 조기 봉합후의 반흔조직 형성으로 인한 치열궁의 협착 또는 중안모의 함몰 경향과 함께 상악 측절치의 선천적 결손 또는 기형치, 전치의 회전과 경사 등이 수반되므로 교정치료에 의한 기능적, 심미적인 치열의 회복이 필요하게 된다. 구순구개열 환자의 교정치료에 있어서 상악치열의 정상적인 배열과 구치부 반대교합의 치료를 위해 상악골 확대가 종종 필요하며, 이를 위하여 Hyrax appliance, Quad-helix 및 Fan-type expansion screw, Jointed fan type expander 등 다양한 장치가 활용될 수 있다. 심하지 않은 구순구개열 환자의 교정치료에서 상악골 확대를 위한 장치의 선택은 환자의 치열궁 형태, 연령, 구치부와 전치부의 치열궁 폭경 등 다양한 요인이 고려되어야 하며, 치료 후 악궁형태의 보정에 특별한 주의를 기울여야 할 것이다.

• Journal of Chest Surgery
• /
• 제38권12호
• /
• pp.873-877
• /
• 2005

Jeune 증후군은 체염색체 열성으로 유전되는 질환으로 다발성 연골 형성장애에 의한 흉벽, 골반, 사지 등의 골격계 발달 이상을 보이며 신장, 간, 췌장, 망막 등에도 병변을 동반할 수 있는 드문 질환이다. 예후에 가장 중요한 인자는 흉곽 기형의 정도인데 특징적으로 경직된 종 모양의 제한적 흉곽을 보이며, 이로 인해 호흡부전과 폐렴의 증상을 보이게 된다. 어린 나이에 증상이 발현될수록 예후가 좋지 않은 것으로 보고되고 있으며 흉곽 기형을 교정하기 위한 여러 수술 방법들이 소개되어 왔으나 1세 이전에 증상이 발현된 경우에 있어서는 수술 교정을 했다고 하더라도 대부분 사망하는 것으로 보고되고 있다. 생후 11개월 된 남자 환아가 출생 후부터 지속된 호흡부전과 폐렴 증상을 주소로 내원하여, Jeune증후군으로 진단받고 측흉벽 확창술을 우측에 시행하였다. 수술 후 호흡 부전이 해결 되지 않아 첫 수술 3개월째 좌측에 대해서도 같은 시술을 시행하였고, 수술 후 좌측 티타늄 판 골절이 발생하여 티타늄 판 재이식술을 시행하였다. 이후 호흡 양상의 호전과 악화를 반복하다가 첫 수술 6개월째 퇴원하였다. 환자는 퇴원 2개월 후 폐렴의 증상으로 재입원하였으며, 재입원 치료 5개월째에 결국 호흡부전으로 사망하였다. Jeune증후군에 대한 측흉벽 확창술을 시행하였기에 그 결과를 문헌 고찰과 함께 보고하는 바이다.

• 대한치과교정학회지
• /
• 제22권3호
• /
• pp.509-529
• /
• 1992

Skeletal Class III malocclusion is one of the most difficult type to treat and stabilize. For a child with developing skeletal Class III malocclusion, the treatment objective would be to stimulate maxillary growth, particulary one who has markedly deficient maxilla, and to restrain excessive mandibular growth. In order to stimulate the maxillary growth, maxillary protraction appliance is the one of the effective orthopedic appliances in skeletal Class III. The purposes of this study were as follows ; evaluation of the skeletal and dental changes of the maxillary protraction in children with Class III Maxillary deficiency , comparison of the clinical effects between the group with RPE and labiolingual intraoral appliances , comparison of the clinical effects and stability related to the ages of the patients : stability of the maxillary protraction about 1 year after retention. The subjects consisted of 60 children between the ages of 8 and 13.4 who were diagnosed as Class III with maxillary deficiency and were treated with Face Mask (Delaire Type) from the Dept. of Orthodontics Yong Dong Severance Hospital, Yonsei University. 48 children wore the RPE and 12 children wore Labiolingual Appliance. Lateral Cephalograms were taken for each patient at before and after correction of anterior cross-bite in 60 children, and after an observation period of 10 to 14 months in 19 children. X and Y coordinate of 10 landmarks were analyzed using a horizontal line through sella and rotated $6^{\circ}$ down anteriorly as the horizontal reference axis, and a perpendicular verticual line through sella as the vertical reference axis. Each of the 31 measurents (10 verticals, 10 horizontals, 2 angles and 9 others) was statistically analyzed using SPSS/PC statistics. The results are as follows; 1. After maxillary protraction the maxilla and maxillary teeth moved downward and forward, while the mandible and mandibular incisor rotated downward and backward. 2. Maxillary protraction with rapid palatal expansion appliance was more effective than with labiolingual appliance. 3. More downward movement of the posterior palatal plane obserbed with maxillary protraction doing the midpalatal suture opening than with protraction after finishing the palatal expansion 4. The clinical effects of protraction and changes of the retention periods were not statistically significant among the age groups. 5. During the retention period, maxilla and maxillary teeth, and mandible and mandibular teeth moved downward and forward, however the mandibular changes were larger than the maxillary changes.