• Journal of Biosystems Engineering
• /
• v.38 no.4
• /
• pp.306-311
• /
• 2013

Purpose: With the ever-rising energy prices, thermal energy heavily consuming facilities of the agricultural sector such as commercialized greenhouses and large-scale Rice Processing Complexes (RPCs) need to cut down their energy cost if they must run profitable businesses continually. One possible way to reduce their energy cost is to utilize combustible agricultural by-products or low-price oil instead of light oil as the fuel for their boiler systems. This study aims to analyze the heavy oil combustion characteristics of a newly developed hot water boiler system that can use both rice husk and heavy oil as its fuel convertibly. Methods: Heavy oil combustion experiments were conducted in this study employing four fuel feed rates (7.6, 8.5, 9.5, 11.4 $l/h$) at a combustion furnace vacuum pressure of 500 Pa and with four combustion furnace vacuum pressures (375, 500, 625, 750 Pa) at fuel feed rates of 9.5 and 11.4 $l/h$. Temperatures at five locations inside the combustion furnace and 20 additional locations throughout the whole hot water boiler system were measured to ascertain the combustion characteristics of the heavy oil. From the temperature measurement data, the thermal efficiency of the system was calculated. Flue gas smoke density and concentrations of air-polluting components in the flue gas were also measured by a gas analyzer. Results: As the fuel feed rate or combustion furnace vacuum pressure increased, the average temperature in the combustion furnace decreased but the thermal efficiency of the system showed no distinctive change. On the other hand, the thermal efficiency of the system was inversely proportionally to the vacuum level in the furnace. For all experimental conditions, the thermal efficiency remained in the range of 80.1-89.6%. The CO concentration in the flue gas was negligibly low. The NO and $SO_2$ concentration as well as the smoke density met the legal requirements. Conclusions: Considering the combustion temperature characteristics, thermal efficiency, and flue gas composition, the optimal combustion condition of the system seemed to be either the fuel feed rate of 9.5 $l/h$ with a combustion furnace vacuum pressure of 375 Pa or a fuel feed rate of 11.4 $l/h$ with a furnace vacuum pressure between 500 Pa and 625 Pa.

• Economic and Environmental Geology
• /
• v.53 no.3
• /
• pp.271-285
• /
• 2020

In this study, a numerical experiment related to the stress-strain analysis was performed on 3-D discrete fracture network(DFN) systems based on the distinct element method to evaluate the effect of joint geometry on deformability of jointed rock masses. Using one or two joint sets with deterministic orientation, a total of 12 3-D DFN blocks having 10m cube domain were generated with different joint density and size distribution. Directional deformation modulus of the DFN cube blocks were estimated along the axis directions of 3-D cartesian coordinate. In addition, deviatoric stress directions were chosen at every 30° of trend and plunge in 3-D for some DFN blocks to examine the variability of directional deformation modulus with respect to joint geometry. The directional deformation modulus of the DFN block were found to reduce with the increase of joint size distribution. The increase in joint density was less likely to have a significant effect on directional deformation modulus of the DFN block in case of the effect of rock bridges was relatively large because of short joint size distribution. It, however, was evaluated that the longer the joint size, the increase in the joint density had a more significant effect on the anisotropic deformation modulus of the DFN block. The variation of the anisotropic deformation modulus according to the variations in joint density and size distribution was highly dependent on the number of joint sets and their orientation in the DFN block. Finally, this study addressed a numerical procedure for stress-strain analysis of jointed rock masses considering joint geometry and discussed a methodology for practical application at the field scale.

• Fire Science and Engineering
• /
• v.30 no.5
• /
• pp.1-8
• /
• 2016

Safety management in hazardous areas with potentially explosive gas atmospheres (here in after referred to as hazardous areas) in large scale facilities dealing with combustible or flammable materials at home and abroad is very important (significant) for the coexistence of the company and local society based on business continuity management (BCM) and reliance. For the safety management in hazardous areas, two systems are mainly used: (1) the control system for the prevention of combustible or flammable substances and (2) the explosion proof system for the elimination of ignition sources when flammable gases are leaked to inhibit the transition to fire or explosion accidents. While technology and regulations on explosion proof facilities or devices for electrical ignition sources are well developed and defined, those for thermal ignition sources need to be more developed and established. In this study, the internal combustion engine in hazardous areas was investigated to determine the risk of ignition. For this purpose, document searches were conducted on the relevant international standards and accidents cases and risk analysis reports. In addition, this study assessed the application cases of the diesel engine's safety equipment, such as spark arresters regarding the site of process safety management (PSM) system in central Korea. To practically apply these results to the hydrocarbon industry, the safety management method for explosion prevention in hazardous areas was provided by risk identification for ignition sources of internal combustion engines, such as diesel engines.

• Fire Science and Engineering
• /
• v.33 no.5
• /
• pp.155-162
• /
• 2019

In Korea, the relevant laws and regulations for fire safety in buildings have been revised. Since 2011, Performance-based Design has been conducted for large-scale or high-rise buildings. However, the Korea's performance-based design is still at a level where life safety evaluation using fire and evacuation simulation tools is compared with existing methods. Although related studies have been conducted continuously for the mandatory performance-based design, the fact that it is relatively unsatisfactory for design and construction of fire-fighting facilities as it mainly focuses on administrative and institutional improvement measures or computer simulation. This study collected 91 performance-based design documents that were carried out nationwide at the initial stage of implementation until 2016 to analyze the status of performance-based design of fire-fighting facilities. As a result, fire-fighting facilities, except for fire extinguish system facilities, were not properly designed for performance. Furthermore, the designers found that if corresponding facilities or higher-level equipment with upgraded performance is additionally installed, the performance-based design fared well compared to the existing the prescriptive-based design.

• The Journal of the Korea Contents Association
• /
• v.10 no.12
• /
• pp.59-69
• /
• 2010

The research on protein for the diseases analysis and the new medicines development is one of the most important themes in biotechnology. Since the analysis on diseases and protein needs to handle a large scale of data, we don't use the way to approach it by the experiments anymore. In recent, we have accelerated the research on diseases and protein analysis by sharing and connecting the various experimental data by combining the biotechnology with the IT technology. However, many biotechnology researchers have difficulty in handling the protein analysis tools based on the IT knowledge. In order to solve such problems, data analysis tools through the cooperation between IT researchers and biologists have been developed. However, the existing data analysis tools still have the problems that it is very hard for biologists to extend their functions and to use them. In this paper, we design and implement an effective analysis system for diseases and protein based on components that alleviates the problems of the existing data analysis systems.

• Journal of Korea Water Resources Association
• /
• v.46 no.6
• /
• pp.655-666
• /
• 2013

Lately, intensity and frequency of natural disasters such as flood are increasing because of abnormal climate. Casualties and property damages due to large-scale floods such as Typhoon Rusa in 2002 and Typhoon Maemi in 2003 rapidly increased, and these show the limits of the existing disaster prevention measures and flood forecasting systems regarding irregular climate changes. In order to efficiently respond to extraordinary flood, it is important to provide effective countermeasures through an inundation model that can accurately simulate flood inundation patterns. However, the existing flood inundation analysis model has problems such as excessive take of analysis time and accuracy of the analyzed results. Therefore, this study conducted a flood inundation analysis by using the Gerris flow solver that uses quadtree grid, targeting the Baeksan Levee in the Nakdong River Basin that collapsed because of a concentrated torrential rainfall in August, 2002. Through comparisons with the FLUMEN model that uses unstructured grid among the existing flood inundation models and the actual flooded areas, it determined the applicability and efficiency of the quadtree grid-based flood inundation model of the Gerris flow solver.

• Journal of the Korean Geographical Society
• /
• v.51 no.6
• /
• pp.853-871
• /
• 2016

The interest in the prevention of sex crimes and social secure is growing as the number of cases by sexual offences becomes higher. Although various punishable ways have been introduced so far, increasing sex crime is still going on. Thus, effectiveness of legal systems for preventing crimes is questionable. More recently, the approach for environmental criminology has been paid attention for reducing criminal opportunities through environmental design and management of crimes. This study attempts to look over the spatial distribution of sexual crimes in the context of environmental criminology, and examine the correlation between regional environmental factors and the occurrence of sexual crimes empirically. To do this, we visualized the map for sex crimes at the macro-scale and explored the spatial distribution of sexual crimes and spatial clusters based on various spatial statistics using sex crime data published online by the ministry of gender equality and family. Also, we derived the environmental characteristics of sexual crimes by multivariate regression analysis on a large number of explanatory variables of regional environment. Our results will help to understand the current situation and spatial aspects of sex crimes in the nation more realistically. Further, it is respected that our results might be useful basic information for establishing regional policies and plans for the prevention of the sexual crime and enhanced public policing.

• Journal of Intelligence and Information Systems
• /
• v.22 no.4
• /
• pp.87-107
• /
• 2016

Understanding market convergence has became essential for small and mid-size enterprises. Identifying convergence items among heterogeneous markets could lead to product innovation and successful market introduction. Previous researches have two limitations. First, traditional researches focusing on patent databases are suitable for detecting technology convergence, however, they have failed to recognize market demands. Second, most researches concentrate on identifying the relationship between existing products or technology. This study presents a platform to identify the opportunity of market convergence by using product databases from a global B2B marketplace. We also attempt to identify convergence opportunity in different industries by applying Structural Hole theory. This paper shows the mechanisms for market convergence: attributes extraction of products and services using text mining and association analysis among attributes, and network analysis based on structural hole. In order to discover market demand, we analyzed 240,002 e-catalog from January 2013 to July 2016.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.24 no.6
• /
• pp.1185-1195
• /
• 2014

Domestic and international CERTs are carrying out security monitoring and response services based on security devices for intrusion incident prevention and damage minimization of the organizations. However, the security monitoring and response service has a fatal limitation in that it is unable to detect unknown attacks that are not matched to the predefined signatures. In recent, many approaches have adopted the darknet technique in order to overcome the limitation. Since the darknet means a set of unused IP addresses, no real systems connected to the darknet. Thus, all the incoming traffic to the darknet can be regarded as attack activities. In this paper, we present a collection and analysis method of malicious URLs based on darkent traffic for advanced security monitoring and response service. The proposed method prepared 8,192 darknet space and extracted all of URLs from the darknet traffic, and carried out in-depth analysis for the extracted URLs. The analysis results can contribute to the emergence response of large-scale cyber threats and it is able to improve the performance of the security monitoring and response if we apply the malicious URLs into the security devices, DNS sinkhole service, etc.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.2
• /
• pp.430-436
• /
• 2010

Since a 'Well-being' theme had become an issue in 90's, everyone now care about their health more than ever. Besides, IT has been developed so tremendously that we have various ways to collect up-to-dated information through the internet. There are so many web sites that contain information about health and diet. However, the menus of these web sites are not simplified and the content is too large, so the information we see in those web sites may not be accurate. Also, some information is out-of-dated. In this paper, we propose a web site called 'Calory&Diet' that provides customized information on diet. The characteristics of the web site are as following: First, the menu is so simple that users can easily find information they want. Second, it only provides necessary customized information. Lastly, it uses an open application that helps users always get the latest information without DB updates. With its user friendly menu and feedback information, the proposed web site can be a good advisor for people who want to be healthy. 100 offers the user survey results than existing systems, simple system to 2%, 3% from a custom-related topics, the latest related topics were 3% higher on 5 point scale.