• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.10
• /
• pp.1574-1582
• /
• 2004

Binary manipulators have recently received much attention due to hyper-redundancy, light weight, good controllability and high reliability. The precise positioning of the manipulator end-effecter requires the use of many modules, which results in a high-dimensional workspace. When the workspace dimension is large, existing inverse kinematics methods such as the Ebert-Uphoff algorithm may require impractically large memory size in determining the binary positions of all actuators. To overcome this limitation, we propose a new inverse kinematics algorithm: the inverse kinematics problem is formulated as an optimization problem using real-valued design variables, The key procedure in this approach is to transform the integer-variable optimization problem to a real-variable optimization problem and to push the real-valued design variables as closely as possible to the permissible binary values. Since the actual optimization is performed in real-valued design variables, the design sensitivity becomes readily available, and the optimization method becomes extremely efficient. Because the proposed formulation is quite general, other design considerations such as operation power minimization can be easily considered.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1545-1548
• /
• 1997

A Force-refecting hand controller can provide the kinesthetic information obtained from a slave manipulator to the operator of a teleoperation system. This thesis presents the desgn and the analysis of a 6-degree-of-freedom force-reflecting hand controller using fivebar parallel mechanism. The goal of this thesis is to construct a superior hand controller that can provide large workspace and good force-reflecting ability. The forward kinematics of the fivebar paprallel mechanism has been calculated in real-time using three pin-joint sensors in addition to six actuator position sensors. A force decomposition approach is used to comput the Jacobin. To analyze the characteristics of the fivebar parallel mechanism, it has been compared with the other three parallel mechanisms in terms with workspace and manipulability measure. The force-reflecting hand controller using the fivebar parallel mechanism has been constructed and tested to verify the feasibility of the design concept.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1585-1588
• /
• 1997

In this paper, divide total workspace of robot manipulator into several subspaces and construct PID controller ineach subspace. Using EvolutionSTrategy we optimize the gains of PID controller in each subspace. But the gains may have a large difference on the boundary of subspaces, which can cause bad oscillatory performance. So we use Aritificial Neural Network to have continuous gain curves htrough the entire subspaces. Simualtion results show that the proposed method is quite useful.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.284-289
• /
• 1995

This paper presents a haptic display of a cooperative work between the networked multiple users. Excluding the possibility of large timedelay among the users, it is presented the way of configuring individual haptic display systems including the computation of interaction forces, joint driving forces of haptic devices and simulation of the virtual objects. A haptic display system is developed consisting of two haptic display devices operated by two remote users and experimental results to show the validity of the proposed method are also presented.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.4
• /
• pp.385-391
• /
• 2008

To effectively cope with a complexity of kinematic metrology due to workspace enlargement of the planar stage, the linear induction motor is suggested as its new driving source. Especially, the linear induction motor under uniform plate type of secondary doesn't inherently have a periodical force ripple which is generally shown in the brushless DC motor. But, it presents a poor transient characteristic at zero or low speed zone owing to time delay of flux settling, resulting in slow response. To improve the servo property of linear induction motor and apply successfully it to the precision stage, this paper discusses a modified vector control methodology. The controller has a novel input form, fixed d-axis current, q-axis current and forward-fed DC current, to control thrust force and normal force of the linear induction motor independently. Influence of the newly introduced input and the feasibility of controller are validated experimentally.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.608-615
• /
• 2022

Construction projects are large-scale projects that require extensive construction costs and resources. Especially, scheduling is considered as one of the essential issues for project success. However, the schedule and resource management are challenging to conduct in high-tech construction projects including complex design of MEP and architectural finishing which has to be constructed within a limited workspace and duration. In order to deal with such a problem, this study suggests resource and sequence optimization using constraint programming in construction projects. The optimization model consists of two modules. The first module is the data structure of the schedule model, which consists of parameters for optimization such as labor, task, workspace, and the work interference rate. The second module is the optimization module, which is for optimizing resources and sequences based on Constraint Programming (CP) methodology. For model validation, actual data of plumbing works were collected from a construction project using a five-minute rate (FMR) method. By comparing actual data and optimized results, this study shows the possibility of reducing the duration of plumbing works in construction projects. This study shows decreased overall project duration by eliminating work interference by optimizing resources and sequences within limited workspaces.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.12
• /
• pp.2698-2706
• /
• 2010

Most tiled display systems supported a public workspace model where multiple users share the contents and work together on a large public screen. In this research, we developed ICE Display Framework, designed for supporting easy construction of tiled display applications allowing mixed-focus collaboration. Mixed-focus collaboration is a model that allows a number of users to work together as a group or individually on the large workspace. ICE Framework allows users to add personal contents on the tiled display without interrupting other users as well as to put shared works. In this paper, we compare ICE framework with previous research and explain the detail implementation. Then, we introduce the applications built with this framework and discuss the evaluation and analysis of the performance of the new framework.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.825-829
• /
• 1993

As a part of the Department of Energy's Environmental Restoration and Waste Management Program, long-reach manipulators are being considered for the retrieval of waste from large storage tanks. Long-reach manipulators may have characteristics significantly different from those of typical industrial robots because of the flexibility of long links needed to cover the large workspace. To avoid structural vibrations during operation, control algorithms employing various types of shaping filters were investigated. A new approach that uses imbedded simulation was developed and compared with others. In the new approach, generation of joint trajectories considering link flexibility was also investigated.

• Journal of Internet Computing and Services
• /
• v.19 no.1
• /
• pp.67-76
• /
• 2018

This paper addresses the problem of efficient processing of region monitoring queries. The centralized methods used for existing region monitoring query processing assumes that the mobile object periodically sends location-updates to the server and the server continues to update the query results. However, a large amount of location updates seriously degrade the system performance. Recently, some distributed methods have been proposed for region monitoring query processing. In the distributed methods, the server allocates to all objects i) a resident domain that is a subspace of the workspace, and ii) a number of nearby query regions. All moving objects send location updates to the server only when they leave the resident domain or cross the boundary of the query region. In order to allocate the resident domain to the moving object along with the nearby query region, we use a query index structure that is constructed by splitting the workspace recursively into equal halves. However, However, the above index structure causes unnecessary division, resulting in deterioration of system performance. In this paper, we propose an adaptive split method to reduce unnecessary splitting. The workspace splitting is dynamically allocated i) considering the spatial relationship between the query region and the resultant subspace, and ii) the distribution of the query region. We proposed an enhanced QR-tree with a new splitting method. Through a set of simulations, we verify the efficiency of the proposed split methods.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.1
• /
• pp.10-14
• /
• 2013

High precision machining technology has become one of the important parts in the development of a precision machine. Such a machine requires high precision positioning as well as high speed on a large workspace. For machining systems having a high precision positioning with a long stroke, it is necessary to examine the repeatability of reference position decision. Though ball-screw driven linear stages equipped linear scale have high precision feed drivers and a long stroke, they have some limitations for reference position decision if they have not equipped the accurate home sensor. This study is performed to experimentally examine the repeatability for home position decision of a magnetic sensor as a home switch of ball-screw driven linear stage by using capacitance probe.