• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.1
• /
• pp.36-40
• /
• 2007

Proteins and lipids not only provide a source of energy to the cell, but also play vital roles in modifying the physical properties and function of the biological membranes. In the present study, we investigated the biochemical constituents, viz. proteins and lipids, in growing oocytes of goat antral follicles during summer and winter seasons. Goat genitalia in phosphate buffered saline (pH 7.4) were brought to the laboratory within one hour of slaughter under aseptic conditions at $37^{\circ}C$. Oocytes were aspirated from normal small (<3 mm in diameter) and large (>3 mm) follicles and pooled for biochemical estimations. A significant increase in the amount of protein and lipid was observed with the growth of the oocyte. The amount of protein varied non-significantly with the season, while the amount of lipid varied significantly. The amounts of phospholipid, cholesterol, free fatty acid, and triglyceride increased with the growth of the oocyte, but no significant effect of season in these constituents was observed. Lysolecithin, sphingomyelin, and sterols were the polar lipids identified in both oocytes prepared from small follicles (small oocytes) as well as large follicles (large oocytes). In addition, the small oocytes also contained phosphatidyl serine, while large oocytes contained phosphatidyl glycerol phosphate and phosphatidyl inositol. Among non-polar lipids, triglycerides and long chain alcohols appear only in small oocytes and not in large oocytes. Monoglycerides, 1,2-diglycerides, 1,3-diglycerides and o-dialkyl glycerol ethers, fatty acids, fatty acid methyl esters, and wax esters were identified in both small and large oocytes. Information on biochemical composition of growing oocytes is relevant to oocyte and embryo competence, culture and cryopreservation.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2005.05a
• /
• pp.93-101
• /
• 2005

Seismicity changes associated with foreshocks of large Korean historical earthquakes of MMI > VIII are investigated for earthquake prediction study. A number of tests showed that b-values of foreshocks associated with these large earthquakes are most stable for precursor period of 13 years before the earthquake and rectangular source area of $1.1^{\circ}$ by $1.1^{\circ}$ around the epicenter. The b-values of foreshocks for 11 large events of MMI > VIII for the above foreshock area and precursor period turns out to be smaller than the value of 0.36 for the whole historical earthquakes with average 0.27. Epicenters of these foreshocks of small b-values are distributed close to the location of the main large earthquake. These observations indicate a possibility of predicting large earthquakes by closely monitoring the change of b-value for an extended period over decades in the Korean peninsula.

• Journal of the Korean Geophysical Society
• /
• v.8 no.3
• /
• pp.115-121
• /
• 2005

Seismicity changes associated with foreshocks of large Korean historical earthquakes of MMI > VIII are investigated for earthquake prediction study. A number of tests showed that b-values of foreshocks associated with these large earthquakes are most stable for precursor period of 13 years before the earthquake and rectangular source area of 1.1o by 1.1o around the epicenter. The b-values of foreshocks for 11 large events of MMI > VIII for the above foreshock area and precursor period turns out to be smaller than the value of 0.36 for the whole historical earthquakes with average 0.27. Epicenters of these foreshocks of small b-values are distributed close to the location of the main large earthquake. These observations indicate a possibility of predicting large earthquakes by closely monitoring the change of b-value for an extended period over decades in the Korean peninsula.

• Applied Science and Convergence Technology
• /
• v.23 no.6
• /
• pp.309-316
• /
• 2014

A large particle accelerator requires an ultrahigh vacuum (UHV) system of average pressure under $1{\times}10^{-7}$ Pa for mitigating the impact of beam scattering from the residual gas molecules. The surface inside the beam ducts should be controlled with an extremely low thermal outgassing rate under $1{\times}10^{-9}Pa{\cdot}m^3/(s{\cdot}m^2)$ for the sake of the insufficient pumping speed. To fulfil the requirements, the aluminum alloys were adopted as the materials of the beam ducts for large accelerator that thanks to the good features of higher thermal conductivity, non-radioactivity, non-magnetism, precise machining capability, et al. To put the aluminum into the large accelerator vacuum systems, several key technologies have been developed will be introduced. The concepts contain the precise computer numerical control (CNC) machining process for the large aluminum ducts and parts in pure alcohol and in an oil-free environment, surface cleaning with ozonized water, stringent welding process control manually or automatically to form a large sector of aluminum ducts, ex-situ baking process to reach UHV and sealed for transportation and installation, UHV pumping with the sputtering ion pumps and the non-evaporable getters (NEG), et al. The developed UHV technologies have been applied to the 3 GeV Taiwan Photon Source (TPS) and revealed good results as the expectation. The problems of leakage encountered during the assembling were most associated with the vacuum baking which result in the consequent trouble shootings and more times of baking. Then the installation of the well-sealed UHV systems is recommended.

• Journal of Positioning, Navigation, and Timing
• /
• v.4 no.4
• /
• pp.181-186
• /
• 2015

A High-degree Cubature Kalman Filter (CKF) is proposed to deal with the Strapdown Inertial Navigation System (SDINS) alignment problem. In-flight Alignment (IFA) is an effective method to compensate for attitude errors of the navigation system. While providing precise attitude error compensation, however, the external source aided alignment often creates a nonlinear filtering problem caused by a large misalignment angle. Introduced recently, Cubature Kalman Filter is a suitable technique for various nonlinear problems. In this paper, a higher degree CKF is applied to this accuracy-is-everything SDINS IFA problem. The simulation results show that the proposed technique outperformed a traditional nonlinear filter in terms of precision and alignment time.

• Wind and Structures
• /
• v.10 no.4
• /
• pp.315-346
• /
• 2007

A preceding companion article introduced the slot jet approach for large-scale quasi-steady modelling of a downburst outflow. This article extends the approach to model the time-dependent features of the outflow. A two-dimensional slot jet with an actuated gate produces a gust with a dominant roll vortex. Two designs for the gate mechanism are investigated. Hot-wire anemometry velocity histories and profiles are presented. As well, a three-dimensional, subcloud numerical model is used to approximate the downdraft microphysics, and to compute stationary and translating outflows at high resolution. The evolution of the horizontal and vertical velocity components is examined. Comparison of the present experimental and numerical results with field observations is encouraging.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.183-183
• /
• 2016

Inductively coupled plasma having the high-density is often used for high productivity in the plasma processing. In large area processing, the plasma can be generated by using the multi-pole connected in parallel. However, in case of this, the power cannot transfer to plasma uniformly. To address the problem, we studied the mechanism of inductively coupled plasma connected in parallel by using transformer model. We also studied about the change of the plasma parameters over the time through the power balance equation and particle balance equation.

• Journal of The Korean Astronomical Society
• /
• v.38 no.2
• /
• pp.145-148
• /
• 2005

We present a photometric study of galaxies in the central regions of six nearby galaxy clusters at redshift z=0.0231${\~}$0.0951. We have derived BVI photometry of the galaxies from the CCD images obtained at the Bohyunsan Optical Astronomical Observatory (BOAO) in Korea, and JHKs photometry of the bright galaxies from the 2MASS extended source catalog. Comparing the galaxy photometry results with the simple stellar population model of Bruzual & Charlot (2003) in the optical & NIR color-color diagrams, we have estimated the ages and metallicities of early type galaxies. We have found that the observed galaxies had recent star-formation mostly 5 ${\~}$ 7 Gyrs ago but the spread in age estimation is rather large. The average metallicities are [Fe/H]=0.l${\~}$0.5 dex. These results support the hypothesis that large early type galaxies in clusters are formed via hierarchical merging of smaller galaxies.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2002.02a
• /
• pp.310-311
• /
• 2002

We designed a large bore superconducting solenoid as a source of magnetic field inside liquid-nitrogen-jacketed liquid helium dewar. The diameter of the sample space in the dewar is about 10.0 cm. Considering the space for thermal insulation between liquid helium and the sample tube, the solenoid bobbin has been designed to be 12.0 cm and the most inner layer of the solenoid 13.0 cm. The desired uniformity of the field, which is ~ $\pm$0.1％ of the central field amplitude deviation within ~5.0$^2$$\times$3.6 ㎤ with the shortest dimension along the solenoidal axis, restricted the length of the solenoid to be at least 41.14 cm.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.787-790
• /
• 2004

The large size and high brightness backlight system for LCD panel inspection equipment was designed, fabricated, and evaluated. The cold cathode fluorescent lamp (CCFL) instead of the hot cathode fluorescent lamp (HCFL) were used as the light source. The inverters for driving multi-lamp CCFL backlight systems were also designed and fabricated. The measured luminance of the fabricated CCFL backlight system was 20,000 cd/$m^2$ and the uniformity of the backlight was 85%. The fabricated backlight system was successfully applied to the LCD panel inspection equipment.