The conventional BMA is performed with the fixed block size. For better performance at low bitrate, the block size is required to be large in relatively stationary area, while small in moving area. Thus, in this paper, a video coding technique using variable block size model is proposed. It decides the block size based on the degree of local motion defined by the local mean and variance of blocks. Computer simulation shows that the proposed method gives comparable performance to the conventional one with less bits required for motion vector coding.
Establishing and maintaining optimum lamp operating temperature is critically important in backlight systems for large area displays. The information presented in this paper is based upon work completed for a tiled 37.5" AM LCD, plus projections for a 37.5", 42" & 50" monolithic display. Due to the size of the units, a requirement for highly collimated light and a requirement for high brightness, >550 nits at the display surface, significant wattage is required which generates high heat levels in the backlight display assembly and potentially, at the display rear surface. Uniformity of illumination becomes an important element in the system design because of the large area involved.
The purpose of this study is to find out the characteristics of area and spatial elements according to the building size and provide the guidelines for space planning of the child care center. This study used the content analysis method and analysis was made on the floor plans for 51 cases and the floor plans were converted to Autocad drawings to analyze the area. The results of this study were as follows; 1) Child care centers over 70% were single-attached building types which made it possible for creating outdoor environments for children. However, most small-size centers which had under 50 children did not have the facilities for outdoor activities. 2) In terms of spatial elements, the basic spaces of the small-size center were the classroom, bathroom, kitchen, office and reference room. The medium or large size centers had extra rooms for special activities and service spaces in addition to the basic spaces. 3) Classroom area per child was 2.65 m2 on average. Space composition ratio on average for care, staff, and service was programmed by 57%, 9%, 34% respectively. Small-size center had relatively more care space when compared to the others. In the case of large-size centers, there was a tendency that service space was increased, but care space was decreased.
In order to find the effects of seed size on the early seedling growth and yield of soybean, three soybean cultivars in Korea were investigated. Seed size was classified into large and small according to the weight and planted in pots(1/5000a) and in the field. Three soybean cultivars respresenting large, medium and small grains were Hwangkeum-kong, Kwangkyo and Bangsa-kong respectively. These cultivars were planted on June 20, 1987. 1. The plant height, stem diameter, root length and leaf area index(LAI) of the seed with large size seemed larger than the seed with small size regardless of cultivars. 2. The fresh and dry weight were different depending upon the grain sizes. The large grain had heavier fresh and dry weight than the small grains. 3. The protein consumption rate of the cotyledon of Bangsa-kong with small grain size was faster than the Hwangkeum-kong with large grain size. 4. The stem length, stem diameter and number of main stem node of the seed with large size seemed larger than the seed with small size. Large grains of Hwangkeum-kong were the highest in the number of branch node and number of node. 5. The number of pods and grains per plant of Bangsa-kong with small grain size was larger than the Kwangkyo with large grain size. 6. The yield per 10a for Hwangkeum-kong, Hwangkyo and Bangsa-kong were 226.3kg, 193.0kg and 192.8kg, respectively and they were all statistically different. The yield increases of large grains over small grains in the Hwangkeum-kong, Kwangkyo, and Bangsa-kong were 7.4%, 8.0% and 9.2%, respectively.
Oh, Jang Soo;Kim, Dong-Joo;Yang, Jae Ho;Kim, Keon Sik;Rhee, Young Woo;Koo, Yang-Hyun
Nuclear Engineering and Technology
/
제46권1호
/
pp.117-124
/
2014
The effect of various process variables on the powder properties of recycled $U_3O_8$ from MnO-$Al_2O_3$ doped large grain $UO_2$ pellets and the effect of those recycled $U_3O_8$ powders on the sintered density and grain size of MnO-$Al_2O_3$ doped large grain $UO_2$ pellets have been investigated. The evolution of morphology, size, and BET surface area of the recycled $U_3O_8$ powders according to the respective variation of the thermo-mechanical treatment variables of oxidation temperature, powder milling, and sequential cyclic heat treatment of oxidation and then reduction was examined. The correlation between the BET surface area of recycled $U_3O_8$ powder and the sintered pellet properties of MnO-$Al_2O_3$ doped pellets showed that the pellet density and grain size of doped pellets were increased and then saturated by increasing the BET surface area of the recycled $U_3O_8$ powder. The density and grain size of the pellets were maximized when the BET surface area of the recycled $U_3O_8$ powder was in the vicinity of $3m^2/g$. Among the process variables applied in this study, the cyclic heat treatment followed by low temperature oxidation was a potential process combination to obtain the sinter-active $U_3O_8$ powder.
Mungbean plants generally have a relatively close canopy, thus a large amount of self-shading can reduce yield due to poor light penetration. Modification of leaflet type can affect leaf canopy and could alter seed yield. Two multiple leaflet mutants were obtained from gamma-ray irradiation and used to study the mode of inheritance related to leaflet types and to evaluate their agronomic features. The cross between large-heptafoliate leaflet with small-pentafoliate leaflet mutants produce all $F_1$ plants with normal trifoliate leaflets. The $F_2$ plants segregated in leaflet size and leaflet number into a 9:3:3:1 ratio of large-trifoliate: large-heptafoliate: small-pentafoliate: small-heptafoliate plants, suggesting that independent loci control leaflet size and leaflet number. Regarding leaflet number, the $F_2$ population can be classified into normal-trifoliate, small-pentafoliate, large-heptafoliate, and small-heptafoliate at the dihybrid ratio of 9:3:3:1. The gene symbols $N_1,n_1$ and $N_2,n_2$ are proposed to represent leaflet number. Since no plant was found with large-pentafoliate leaflets, we hypothesize that the $N_2$ allele expresses pleiotropic effect on both leaflet number and leaflet size. Another possibility is that an additional locus with S and s alleles controls leaflet size and S is tightly linked with $N_2$. The effect of multifoliate leaflet on yield and yield components was evaluated in four mungbean families each with four leaflet isolines under three environments. Averaging across the families and environments, the normal-trifoliate and large-heptafoliate lines gave higher yield than small pentafoliate and heptafoliate ones. These two large leaflet lines also had higher leaf area per plant than the other multifoliate lines. Therefore, the mungbean lines with a greater leaf area, which were likely to intercept more sunlight, gave greater yield. Three AFLP markers that were found to be linked to number of leaflets per leaf, corresponded to the N1 allele of the smallpentafoliate parent.
Background: Korean wild boars (Sus scrofa coreanus Heude), because of their adaptability, are a widespread large mammal; however, they sometimes cause problems by invading farms and eating the crops, creating insufficiencies of some foods in South Korea. To understand the diet composition of Korean wild boars according to sex and body size, we collected their feces from Mt. Jeombongsan, Seoraksan National Park, South Korea. The sizes of fecal samples were measured, and genomic DNA was extracted from the samples. We amplified specific loci targeting plants (rbcL and trnL) and animals (COI) to detect the food sources of this omnivore and amplified the ZF and SRY regions to determine the sex. Results: In the wild boar feces, Rosaceae and Bryophyte were the most frequently detected plant food sources at the family level and Diptera and Haplotaxida were the most frequently detected animal food sources at the order level. As a result of sex determination, the sex ratio of wild boars collected in the Mt. Jeombongsan area was approximately 1:1. Our result suggested that there is no significant difference between the diet composition of male and female boars. Based on the average cross-sectional area of the feces, the top 25% were classified into the large body size group and the bottom 25% were classified into the small body size group. The large body size group mainly preferred Actinidiaceae, and the small body size group most frequently consumed Fagaceae. The diet of the large body size group was more diverse than the small body size group. Conclusions: Our results showed that the wild boars preferred Rosaceae, especially Sanguisorba and Filipendula, as plant food sources, and Diptera and Coleoptera of Insecta as animal food sources. Based on the results, the dietary preferences of wild boar appear to be distinguished by not their sex but their body size. Our study could help to elucidate the feeding ecology and population structure of wild boar, as well as address conservation and management issues.
Double-sided photovoltaic (PV) modules have received significant attention in recent years as a technology that can achieve higher annual energy production rates than single-sided modules. The shingled technology is a promising method for manufacturing high-density and high-power modules. These modules are divided by laser and joined with electrically conductive adhesives. The output efficiency of the divided cells depends on the division pattern and the electrode pattern, making it important to understand the output characteristics. In this study, the output characteristics of large-area double-sided light-receiving shingled cells with different split patterns and electrode patterns were investigated. The M6 size, with 6 divisions in the electrode pattern, had the highest efficiency when using 142 front fingers and 146 rear fingers. The M10 size, with 7 divisions, had the highest output when using 150 fingers equally in the front and rear. The M12 size, also with 7 divisions, showed the highest output characteristics when using 192 front fingers and 208 rear fingers.
This study aimed to analyze the characteristics of the lower-body shape of middle-aged males with abdominal obesity by type and consider dimensional distribution to present a suit-pants size. The criteria were having a waist circumference greater than 90 cm and a waist-to-hip ratio(WHR) greater than 0.90; a total of 566 middle-aged males were surveyed. The findings revealed that, first, compared to standard lower-body types, the average body size of abdomenobese middle-aged males was significantly larger, especially in the horizontal area than in the vertical ares. Second, through a cluster analysis, a total of three categories of abdominal obesity were defined: small oval, large cylinder, and trapezoid type. The coverage rates of each type were 93.8%, 75.9%, and 93.0%, respectively. Finally, the suit-pants size system established according to lower-body types indicated the basic body size and reference body size were different for each type and also for the KS K 0050 male adult's garments size system. According to the definition of abdominal obesity, the types of abdominal obesity and the dimensions of each area are different, even if they belong to the same obesity group, suggesting that it is necessary to develop a pattern based on the analysis of obesity types.
For the high efficiency of the photovoltaic module, a high-output solar cell, which is the basis of photovoltaic power generation, is required. As the light receiving area of the solar cell increases, the light receiving area of the photovoltaic module also increases. Accordingly, recent trend is to use large-area solar cells such as M6 and M8 instead of M2-based solar cells for manufacturing the photovoltaic module and a study on the mechanical stiffness of the module with increased size is required. In this study, a mechanical load test corresponding to IEC-61215 was performed among the reliability tests of large-area photovoltaic modules. In order to confirm the degree to which the mechanical load test affects the photovoltaic module, the output and EL images were checked by sequentially increasing the pressure by 600 Pa at a pressure of 2400 Pa. Also, factors such as output and efficiency of large-area photovoltaic modules were verified through mechanical load testing of actual large-area photovoltaic modules and the rate of change was very small at 1%.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.