• Journal of The Geomorphological Association of Korea
• /
• v.26 no.1
• /
• pp.41-57
• /
• 2019

The grain size characteristics of river sediments and the characteristics of bedrock were investigated for the 24km section of the Dong River upstream of the Han River. The bedrock of the study area is various limestone belonging to the Paleozoic Choseon limestone group, and Mesozoic sandstone and conglomerate occur in some areas. Most of the river channel is made of limestone, and most of the river bottom is covered with fluvial sediments. More than 70% of these sediments are sandstone and conglomerate, rather than limestone which forms the basis of the valley. Sediment particles seem to have been supplied upstream of the study area rather supplied from the slope near of the channel. It is difficult to find the statistically significant difference in the shape of the sediment particles of limestones and non-limestones. However, limestones has platy forms rather than block forms, it can be assumed that the limestone was supplied from the surrounding valley wall and transported over a short distance. The particle sizes of DG1~DG2(the upstream section) are decreasing in the downstream direction. However, at DG3, which is a tributary, Jijangcheon, confluence particle size increases and at DG4 particle size increases more. In the case of DG4, it may be influenced by the influx of tributaries, but it also can be supposed as the impact of the large flood in 2002. In the downstream parts(DG5~DG7), the particle size decreases exponentially with distance. The rebound strength of stream sediments and bedrock was measured by using Schmidt hammer. Limestone showed lower rebound strength than non-limestone. According to the results of the sediment and bedrock, it can be seen that the sandstone and conglomerate with high rebound values pass through valley with the relatively low strength limestone. The sediments of limestone were decreased in grain size more rapidly than those of limestone sediments.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.15 no.1
• /
• pp.75-84
• /
• 2013

The management system and profitability were compared for the commercial orchards in the apple producing districts from April to October, 2011. The present study reasonably graded a large fruit as a fruit of heavier than 300g for 'Fuji' and 330g for 'Hongro' apples. As comparing cropping density and yield efficiency, 'Fuji' apples showed 3.28 fruits per TCA of crop density and 0.96 kg per TCA of yield efficiency and 'Hongro' demonstrated 4.04 fruits and 1.01 kg. With the application of the results above, the orchard management systems was classified into 3 classes as the orchard for large-size fruits, medium-size fruits, and combined size fruits. The increase of cropping density made the increase of fruit yield with medium-size fruits in unit area but brought about the decrease of large size fruits. The difference in fruit size failed to make significant differences in fruit characteristics. The orchard management system for producing medium size fruits performed decrease in input cost and improved the profitability in orchard management.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.4 no.2
• /
• pp.25-33
• /
• 1984

The effect of particle size on adsorption of trihalomethane have been studied. Using mean particle sizes ranging from 0.73 to 2.03 mm, physical properties of carbon and trihalomethane adsorption characteristics have been investigated experimentally. With increasing particle size specific surface area and pore volume decreased, and the mean pore radius increased significantly. Large pores were dominant in large particles, while small particles were composed of small pores. Isotherm studies were conducted using static bottle point technique and the results were well described by the Freundlich isotherm equations. The adsorption capacity increased significantly with decreased particle size. Additionally micro-column tests were carried out, and the results were compared with the model simulation. From the micro-column studies it was found out that the film transfer coefficient were almost constant, and the differences in the trihalomethane removal efficiency was mainly due to the differences in the adsorption capacity of the particles of different size.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1018-1020
• /
• 2003

The costal area where takes up over 32% in domestic teritory is considered as very importantly because it has not only economic facilities such as harbor and an industrial complex but also recreation facilities. Moreover, the tidal flat area has been used as culture ponds and salt farms because this area is occupied by various oceanic species. Also, the tidal flat area has played an important role to purify ocean pollution and maintain an ecosystem. However, the costal ecosystem has seriously threatened by domestic reclamation projects and a large-scale tide embankment during recent 10 years in Korea. This serious problem results in loosing 34%(810$km^2$) of the entire domestic costal area. In this paper, the micro-landform in the tidal flat area, which is called as Garolim bay in Korea, is classified by using Landsat TM images also verified through a filed report. Through the result of this, the tidal flat area is expected to manage efficiently especially through analyzing sediment environment and characteristic of grain size by using satellite images.

• The KIPS Transactions:PartD
• /
• v.11D no.3
• /
• pp.691-702
• /
• 2004

In this paper, we propose a sequence of method which extrats ROIs(Region of Interests) rapidly from the parcel image of large size. In the proposed method, original image is spilt into the small masks, and the meaningful masks, the ROIs, are extracted by two criterions sequentially The first criterion is difference of pixel value between Inner points, and the second is deviation of it. After processing, some informational ROIs-the areas of bar code, characters, label and the outline of object-are acquired. Using diagonal axis of each ROI and the feature of various 2D bar code, the area of 2D bar code can be extracted from the ROIs. From an experiment using above methods, various ROIs are extracted less than 200msec from large-size parcel image, and 2D bar code region is selected by the accuracy of 100％.

• Fashion & Textile Research Journal
• /
• v.21 no.4
• /
• pp.468-479
• /
• 2019

This study used a three-dimensional-analysis method to quantitatively analyze the change of clothing appearance according to a gusset added to bodice and sleeve patterns for men in their twenties. Comparing six different patterns, the study found that patterns P1 and P2 with little gusset did not have a large difference in the strain map, and pattern P6 had no gusset in the motion of raising the arm $28^{\circ}$ to the side (M1). When the arm was raised $45^{\circ}$ to the side (M2), the P1 pattern had the smallest deformation, and only the P5 pattern had a large deformation from the neck to the armhole area. In contrast, except for in the P3 pattern, large wrinkles formed in the front and back when the arm was raised above $158^{\circ}$ (M3) from the side of the waist to the armpit. In addition, P3 had the smallest change in the hem of the bodice and sleeves. However, the appearance of P2, P3, and P5 was excellent when the arm was moved forward (M4), and the P2 and P5 patterns were the smallest at the bodice and sleeve hem. The P6 pattern showed the least fitness in terms of function. In the case of raising the arm, there was a strong correlation between gusset size and motion function, but when the motion of the arm changed, the motion function did not improved just by changing the ease size.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.1
• /
• pp.11-13
• /
• 2013

Background: Esophagus cancer, the third most common gastrointestinal cancer overall, demonstrates high incidence in parts of Iran. The counties of Iran vary in size, shape and population size. The aim of this study was to account for spatial support with Area-to-Area (ATA) Poisson Kriging to increase precision of parameter estimates and yield correct variance and create maps of disease rates. Materials and Methods: This study involved application/ecology methodology, illustrated using esophagus cancer data recorded by the Ministry of Health and Medical Education (in the Non-infectious Diseases Management Center) of Iran. The analysis focused on the 336 counties over the years 2003-2007. ATA was used for estimating the parameters of the map with SpaceStat and ArcGIS9.3 software for analysing the data and drawing maps. Results: Northern counties of Iran have high risk estimation. The ATA Poisson Kriging approach yielded variance increase in large sparsely populated counties. So, central counties had the most prediction variance. Conclusions: The ATAPoisson kriging approach is recommended for estimating parameters of disease mapping since this method accounts for spatial support and patterns in irregular spatial areas. The results demonstrate that the counties in provinces Ardebil, Mazandaran and Kordestan have higher risk than other counties.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.1005-1008
• /
• 1999

This paper presents a method for procedure-based on-line program replacement for user applications. To deal with the size change in the procedure to replace, the method uses the unmapped area of process address space for mapping a new version of procedure. The method is effective in that and it does not cause large performance loss during the replacement or require any additional software layer for the replacement. The method is illustrated in the SUN Solaris environment.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.805-807
• /
• 2005

A basic assessment is presented of the technical, economic and strategic challenges expected for manufacturing displays in a roll-to-roll format. Two general pathways are considered; one that results in dramatic cost reductions but results in sacrificing product performance, and another which is an extension of the conventional FPD cost-reduction from increased substrate size. While Roll-to-Roll fabrication is fundamentally possible, feasibility experiments will be required to address the most significant technical challenge: achieving and managing acceptable yield. In all respects, the efforts to achieve RTR manufacturing will be assisted by overlapping interests in other application areas such as flex circuit, photovoltaics and large area lighting.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.933-936
• /
• 2007

An inductively coupled plasma source with internaltype linear inductive antennas named as "multiple Utype antenna" was developed for the substrate size of $2,300mm\;{\times}\;2,000mm$. High density plasmas on the order of $1.18\;{\times}\;10^{11}\;cm^{-3}$ could be obtained and the RF power of 8kW with good plasma stability.