• 제목/요약/키워드: large green house

검색결과 58건 처리시간 0.026초

폐(廢)콘크리트 미분말(微粉末)과 무기성(無機性) 폐부산물(廢副産物)을 이용(利用)한 $CO_2$ 고형화(固形化) (The Solidification of $CO_2$ by Using Waste Cement and Inorganic Waste By-Products)

  • 안지환;유광석
    • 자원리싸이클링
    • /
    • 제18권3호
    • /
    • pp.3-10
    • /
    • 2009
  • 무기성 산업폐기물을 이용한 $CO_2$ 고형화 연구는 폐콘크리트 시멘트 미분말 등 무기성 산업폐부산물의 성분 중의 CaO 또는 MgO 성분과 지구온난화의 주범인 $CO_2$와 반응시켜 탄소를 안정적으로 고형화시켜 대기 중의 $CO_2$의 발생을 저감시키는 연구이다. 본 고에서는 산업 현장 및 도시에서 발생되는 $CO_2$의 대기 방출을 저감시킴과 동시에 산업폐부산물의 유효 자원화를 위한 $CO_2$ 고형화 연구의 국내외 기술 동향을 파악하고, 이를 통해 한국형 $CO_2$ 저감 및 활용 기술을 제시하고자 한다.

지하공기열 히트펌프 제습기에 관한 실험적 연구 (An Experimental Study on a Heat Pump with Dehumidification Function that Utilizes Underground Air Heat)

  • 고지운;박윤철;고광수
    • 설비공학논문집
    • /
    • 제26권2호
    • /
    • pp.55-60
    • /
    • 2014
  • The present study has been conducted to develope a heating system for a green house with heat from underground air at Jeju Island. The temperature of the air deposited in the underground is $16{\sim}18^{\circ}C$ throughout the year, and it also has a large amount of moisture. Therefore, the air could not directly used for the heating of a green house. In this study, a heat pump with dehumidification function has been developed, which consisted of three evaporators, where the moisture removal occurs, accompanied by temperature drop. The dropped temperature is recovered, while passing through a series condenser. The air temperature increased from $17^{\circ}C$ to 35 with a 2.1 kg/h of moisture removal rate. The developed system moisture removal performance shows 0.91 kg/kWh.

Applied High-Tc Superconducting Electrical machines

  • Hoshino, Tsutomu;Muta, Itsuya;Nakamura, Taketsune
    • 한국초전도저온공학회:학술대회논문집
    • /
    • 한국초전도저온공학회 2000년도 KIASC Conference 2000 / 2000년도 학술대회 논문집
    • /
    • pp.73-76
    • /
    • 2000
  • Superconductivity is key technology for 21st century. To suppress emission of green house effect gas, applied superconductivity is important. In this paper, the current status of superconducting power machines such as generatorand motor are described. Most of all studies are the step of demonstration of idea and possibility. There are large gap between physical idea and actual apparatus. Further collaboration between scientists and engineers has been required.

  • PDF

온대지역 부영양 저수지의 이산화탄소 배출량 산정 (Estimation of CO2 Emission from a Eutrophic Reservoir in Temperate Region)

  • 정세웅;유지수;박형석
    • 한국물환경학회지
    • /
    • 제32권5호
    • /
    • pp.433-441
    • /
    • 2016
  • Many large dams have been constructed for water supply, irrigation, flood control and hydropower in Korea for the last century. Meanwhile, recent studies indicated that the artificial reservoirs impounded by these dams are major sources of carbon dioxide (CO2) to the atmosphere and relevant to global budget of green house gases. However, limited information is available on the seasonal variations of CO2 evasion from the reservoirs located in the temperate monsoon regions including Korea. The objectives of this study were to estimate daily Net Atmospheric Flux (NAF) of CO2 in Daecheong Reservoir located in Geum River basin of Korea, and analyze the influencing parameters that characterize the variation of NAF. Daily pH and alkalinity (Alk) data collected in wet year (2012) and dry year (2013) were used for estimating the NAFs in the reservoir. The dissolved inorganic carbon (DIC) was computed using the pH and Alk measurements supposing an equilibrium state among the carbonate species. The results showed seasonal variations of NAF; negative NAFs from May to October when the primary production of the reservoir increased with water temperature increase, while positive NAF for the rest of the period. Overall the reservoir acted as sources of CO2 to the atmosphere. The estimated NAFs were 2,590 and 771 mg CO2 m-2d-1 in 2012 and 2013, respectively, indicating that the NAFs vary a large extent for different hydrological years. Statistical analysis indicated that the NAFs are negatively correlated to pH, water temperature, and Chl-a concentration of the reservoir.

무기질(無機質) 폐기물(廢棄物)의 재활용(再活用)을 통한 CDM 사업(事業) 적용사례(適用事例) 및 전망(展望) - 시멘트 산업(産業)을 중심(中心)으로 - (Applications and prospect of CDM project through recycling of inorganic waste)

  • 조진상;조규홍;안지환;엄성일;연규석
    • 자원리싸이클링
    • /
    • 제20권2호
    • /
    • pp.3-15
    • /
    • 2011
  • 현재 CDM사업 등록은 대부분 에너지, 화학공정, 제조공정 분야에서 이루어지고 있다. 그러나, 무기질 자원재활용을 통한 CDM사업 등록은 그렇게 많지 않은 실정이다. 본 논문에서는 국내 무기질 폐기물의 재자원화를 통한 CDM사업 등록 가능성을 알아보기 위하여 국내외 CDM사업 현황 분석 및 적용사례를 조사하였다. 조사결과 CDM사업 등록 사례는 대량으로 활용할 수 있는 산업 중의 하나인 시멘트산업의 원료 대체화 분야에서 다수의 등록이 이루어진 것으로 조사되었다. 우리나라에서의 CDM사업 적용 전망은 산업의 규모, 무기질 자원 활용 산업 및 온실가스 배출량을 분석하고 대량으로 활용할 수 있을 정도로 지속적으로 발생되는 우기질 폐가물의 현황 등을 면밀히 검토해야 할 것으로 판단된다.

2행정 대형 디젤엔진의 성능향상을 위한 연료첨가제의 실험적 연구 (An Experimental Study of the Fuel Additive to Improve the Performance of a 2-Stroke Large Diesel Engine)

  • 류영현;이영서;남정길
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제39권6호
    • /
    • pp.620-625
    • /
    • 2015
  • IMO MEPC에서는 지구온난화를 늦추기 위해서, 선박에서 배출되는 GHG(Green House Gas)인 $CO_2$를 줄이기 위한 방안으로 선속을 다운시켜 운항할 것을 제안한바 있으며, 해운회사에서도 연료비 절감을 위해서 자발적으로 감속운항(Low steaming)을 하고 있어, 국제항해에 종사하고 있는 대부분의 컨테이너선들이 감속운항을 하고 있다. 또한, 날로 증가되고 있는 해운 물동량 증가로 선박의 연료비 부담이 증가되고 있어 연료비 절감 기술개발이 절실히 요구되고 있다. 따라서 본 연구에서는 디젤엔진의 성능을 향상시킬 수 있는 연료첨가제(유용성 칼슘계 유기금속화합물)를 일정량 투입(사용 연료량의 0.025%) 하여 연료비를 절감하는 방법을 시도하였다. 실험의 정확도를 위해서 육상 발전소에 설치된 2행정 대형 디젤엔진을 실험 대상으로 하였다. 실험 엔진의 부하는 저, 중 및 고 부하(50, 75, 100%)로 나누어서 실시하였으며, 연료첨가제의 투입 전과 투입 후의 엔진성능(출력, 연료소비율, 최고연소압력(P-max), 배기온도)을 비교 분석 하였다. 본 실험을 통해서 연료첨가제를 투입함으로써 저부하(50%) 에서 2% 이상의 연료비 절감 효과를 확인 할 수 있었으며, 최고연소압력은 상승하는 반면에 배기온도는 하강함을 알 수 있었다.

Nonlinear deflection responses of layered composite structure using uncertain fuzzified elastic properties

  • Patle, B.K.;Hirwani, Chetan K.;Panda, Subrata Kumar;Katariya, Pankaj V.;Dewangan, Hukum Chand;Sharma, Nitin
    • Steel and Composite Structures
    • /
    • 제35권6호
    • /
    • pp.753-763
    • /
    • 2020
  • In this article, the influence of fuzzified uncertain composite elastic properties on non-linear deformation behaviour of the composite structure is investigated under external mechanical loadings (uniform and sinusoidal distributed loading) including the different end boundaries. In this regard, the composite model has been derived considering the fuzzified elastic properties (through a triangular fuzzy function, α cut) and the large geometrical distortion (Green-Lagrange strain) in the framework of the higher-order mid-plane kinematics. The results are obtained using the fuzzified nonlinear finite element model via in-house developed computer code (MATLAB). Initially, the model accuracy has been established and explored later to show the dominating elastic parameter affect the deflection due to the inclusion of fuzzified properties by solving a set of new numerical examples.

가구류 제품의 시험방법간 상관성 분석 연구 (Development of Correlation Analysis on the Test Methods of Furniure-like Products)

  • 김수하;이윤규;서영민
    • 설비공학논문집
    • /
    • 제25권12호
    • /
    • pp.679-684
    • /
    • 2013
  • Hazardous chemicals emitted from building materials and furniture have led to social problems such as sick house syndrome. Test methods for the evaluation of pollutant emissions from furniture-like products have been applied using various national and international standards and classifications, but they are not currently unified. This research has been done to organize the various standards and certification methods and to make new classification systems. Proper test methods have been proposed, tested, and analyzed through this research.

실내공간에 있어서 식물 이용 방법과 선호도 분석에 관한 연구 (A Study on the Method of Using Plants and Preference Analysis for Interior Space)

  • 김태환;한승원
    • 한국실내디자인학회논문집
    • /
    • 제11호
    • /
    • pp.31-37
    • /
    • 1997
  • This study intens to provide available guideline of useful plants in interior and be used by designer. It focuses on evaluating the character of plants, the method of installation and the form of composition for suitable design of using plants. The study finds out that using plants in interior are necessary positively by 94% respondents. And results of factor analysis are that plants are needed for emothional stability(factor 1), visual charming(factor 2), and educational effection(factor 3). According to job, the group of students is visual charming (P=0.0037), the public servants and housewives is educational effection(p=0.0029). The most available space of plants as follows : Department(30.5%), Hotell(26.3%), House and Restuarant(12.7%). It has been identified that the public institution and commercial space are much indused plants. The most indused plants in house is ordered that the veranda, the living room, the entrance. This result is concerned about relation of natural light plants. The repondants reply that the favorite arrangement style is the corner form(63%), the center garden form(52.1%), the large planter(19.7%), the planter box(11.3%). They respond that they are more favorite light green color than dark, and mono color than mixture color. Finally, interior Designers should be understood the functional and aesthetic elements and the special interest about plants for developing desigv.

  • PDF

CO2 해상 지중저장을 위한 주입설비 설계 및 구축 연구 (Design and Construction Study of an Injection Facility for CO2 Offshore Storage)

  • 문흥만;김효준;신세진;이용일;권시현;권이균
    • 지질공학
    • /
    • 제28권2호
    • /
    • pp.207-215
    • /
    • 2018
  • 지구온난화 문제가 인류 생존을 위협하는 중대한 이슈로 떠오르면서 세계 각국은 온실가스 감축에 적극 나서고 있다. 대표적 온실가스인 이산화탄소($CO_2$)는 석탄, 석유와 같은 화석연료를 연소하는 과정에서 대량으로 방출되고 있다. $CO_2$를 포집하고 저장하는 CCS ($CO_2$ Capture & Storage) 기술은 온실가스 저감의 대표적 기술로 세계 각국에서 연구가 활발하게 진행되고 있다. 본 연구는 대규모 $CO_2$ 배출원에서 포집된 $CO_2$를 대상으로, 국내 최초로 해상에서 지중저장을 하기 위한 고압 주입설비의 설계 및 구축에 관한 연구다. 이를 위해 2017년초 $CO_2$ 지중 주입설비가 구축되었으며 포항시 영일만 해상 플랫폼에서 $CO_2$ 시험주입을 국내 최초로 성공하였다. 그 결과 해상주입을 위한 주입설비의 운전 요구조건과 $CO_2$ 주입 특성이 파악되었고 주입장치 운영에 관한 노하우도 얻게 되었다. 시험주입에서 얻어진 결과는 향후 장치개선과 scale-up에 활용될 예정이다.