• 한국수소및신에너지학회논문집
• /
• 제19권2호
• /
• pp.156-162
• /
• 2008

The condensation pressure drop for R-22 and R-410A flowing in a small diameter tube was investigated. The test section is a counterflow heat exchanger with refrigerant flowing in the inner tube and coolant flowing in the annulus. The test section consists of 1220 mm length with horizontal copper tube of 3.38 mm outer diameter and 1.77 mm inner diameter. The refrigerant mass fluxes ranged from 450 to $1050\;kg/m^2{\cdot}s$ and the average inlet and outlet qualities were 0.05 and 0.95, respectively. The main experimental results were summarized as follows : In the case of two-phase flow, the pressure drop increases with increasing mass flux and decreasing quality. The pressure drop of R-22 is slightly higher than that of R-410A for the same mass flux. Most of correlations proposed in the large diameter tube showed enormous deviations with experimental data.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제3권2호
• /
• pp.161-171
• /
• 1999

Aerodynamic sensitivity analysis codes are developed via the hand-differentiation using a direct differentiation method and an adjoint method respectively from discrete two-dimensional compressible Navier-Stokes equations. Unlike previous other researches, Baldwin-Lomax algebraic turbulence model is also differentiated by hand to obtain design sensitivities with respect to design variables of interest in turbulent flows. Discrete direct sensitivity equations and adjoint equations are efficiently solved by the same time integration scheme adopted in the flow solver routine. The required memory for the adjoint sensitivity code is greatly reduced at the cost of the computational time by allowing the large banded flux jacobian matrix unassembled. Direct sensitivity code results are found to be exactly coincident with sensitivity derivatives obtained by the finite difference. Adjoint code results of a turbulent flow case show slight deviations from the exact results due to the limitation of the algebraic turbulence model in implementing the adjoint formulation. However, current adjoint sensitivity code yields much more accurate sensitivity derivatives than the adjoint code with the turbulence eddy viscosity being kept constant, which is a usual assumption for the prior researches.

• 한국농공학회지
• /
• 제39권2호
• /
• pp.95-102
• /
• 1997

The technique of the calculation for probabilistic functions used in the reliability analysis of agricultural structures is proposed in this paper for adapting the standardization method using a numerical intergration. The proposed standardization method deals with the structures whose deviations of material properties and loads are large such that the deviation range from 20% to 70%. The results computed by the proposed method are compared with those obtained by the Monte Carlo Simulation. Deterministic values such as deflection, stress, obtained by conventional structural analysis can be directly changed to probabilistic distributions by the proposed method.

• 대한기계학회논문집A
• /
• 제33권9호
• /
• pp.969-975
• /
• 2009

In this paper, bonded wafer analysis system is proposed using laser beam transmission; while the transmission model is derived by simulation. Since the failure of bonded wafer stems in void existence, transmittance deviations caused by the thickness of the void are analyzed and variations of the intensity through the void or defect easily have been recognized then the testing power has been increased. In addition, large screen display on laser study has been done which resulted in acquiring a feasible technique for analysis of the whole bonding surface. In this regard, three approaches are demonstrated in which Halogen lamp, IR lamp and laser have been tested and subsequently by results comparison the optimized technique using laser has been derived.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.799-804
• /
• 2002

In this paper the leakage prediction and rotordynamic analysis of an annular seal with a smooth rotor and spiral-grooved stator are performed. For developing a theoretical model, the three-control-volume analysis of the circumferentially-grooved seal is expanded by considering pressure reduction due to the pumping effect of spiral groove and pressure flow through the spiral groove. Results by the present analysis are compared with available experimental data. For leakage the analysis results generally show a reasonable agreement to the experimental results. For rotordynamic coefficients the analysis results show the same trend as the experimental results for rotor speed with spiral angles, but their magnitudes show somewhat large deviations.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권3호
• /
• pp.326-329
• /
• 2002

A population of exotic Holstein Friesian, Jersey, their crossbreds and the indigenous Murrah breed of buffalo bulls (n=486), used in artificial insemination breeding program were screened for the allelic distribution of the ${\kappa}$-casein and ${\beta}$-lactoglobulin genotypes. The preferred "B" allele frequency was highest in Murrah buffalo bulls followed by Jersey and Holstein Friesian. The increase in this particular allele frequency in the Holstein Friesian crossbred bulls was more when compared to their Jersey counterparts. Hardy-Weinberg's equilibrium was maintained albeit with some deviations, which was higher in crossbreds than in purebreds. The feasibility of using such large-scale molecular diagnostic tools in the field and their significance with regards to the dairy economy is discussed.

• KIEAE Journal
• /
• 제10권3호
• /
• pp.103-110
• /
• 2010

Carbonation is one of the major deterioration factors for concrete. So. lots of researchers have proposed the equations for determining carbonated depth and the initial time of steel corrosion due to carbonation to predict the service life of concrete structures. However, there are large gaps among the equations for predicting carbonation because each researcher has different considering factors to predict carbonation depth. So, in this study, we calculated the deviations of the proposed equations for carbonation, and we calculated each researcher different corrosion initiation time. However, it has a lot of deviation. Therefore, we evaluated the probability of steel corrosion considering each deviation using MCS, an analysis method based on probability theory. In the results, we have proposed much advanced information for determining service life of reinforced concrete structures due to carbonation.

• 소성∙가공
• /
• 제14권9호통권81호
• /
• pp.791-797
• /
• 2005

Extensive width reduction of slabs is an important technology for achieving continuous production between the steelmaking and hot rolling processes. However, the vertical horizontal rolling process has many disadvantages, e.g., large width deviations and less efficient width reduction. This study was carried out to investigate the deformation of slab by sizing press with two steps die. To do it, dog-bone and camber are discussed in width sizing process considering the deformation behavior according to the deviation of anvil velocity and the deviation of initial slab temperature. In this paper, the various causes of the sizing press phenomena are mentioned for the purpose of understanding of rolling conditions. As a result, the optimal anvil shape having a minimum-forming load is obtained by FE-simulation and ANN.

• 대한치과교정학회지
• /
• 제14권2호
• /
• pp.263-272
• /
• 1984

This study was undertaken to examine the extent to which tooth size and jaw size each contribute to dental crowding. Two groups of dental casts were selected on the basis of dental crowding. One group, consisting of 94 pairs of dental casts (46 males and 48 females) with normal occlusion. A second group, consisting of 84 pairs of dental casts (98 males and 46 females) with crowding. The results were as follows. 1. Means and standard deviations of the two groups were used to compare the two groups. 2. Significant differences were observed between two groups on the basis of tooth size, arch dimension and arch perimeter. 3. Between noncrowded group and crowded group, was crowded group was found to have large troth size than noncrowded group, while smaller arch dimension and perimeter. 4. Significant differences were observed between males and females on the basis of tooth size, arch dimension and arch perimeter. 5. Author found ideal arch shape of normal occlusion.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1999년도 PROCEEDINGS OF 99 INTERNATIONAL CONFERENCE OF THE KACG AND 6TH KOREA·JAPAN EMG SYMPOSIUM (ELECTRONIC MATERIALS GROWTH SYMPOSIUM), HANYANG UNIVERSITY, SEOUL, 06월 09일 JUNE 1999
• /
• pp.227-250
• /
• 1999

The reproducibility of successive growth of Bi12TiO20(BTO) single crystals using a top-seeded solution growth (TSSG) pulling method was evaluated by measuring the lattice constants and their standard deviations. A substantial phase diagram in the region close to the stoichiometric BTO was established experimentally for this purpose, and the existence of a retrograde solid solution close to a BTO was clarified. It was emphasize that a starting solution, with a 10.0~10.1 mol% TiO2 concentration, results in large single crystals with a highly homogeneous lattice constant of within $\pm$1x10-4$\AA$, when the solidified fraction of the grown crystal is less than about 45%. A wavelength dispersion of refractive index was measured for the first time, an it was verified that the refractive index of BTO is larger than that of BSO(Bi12TiO20), allowing the voltage sensitivity of EOS higher than the case with BSO as a probe head.