• Journal of Ecology and Environment
• /
• v.48 no.3
• /
• pp.222-232
• /
• 2024

Background: Janghang Wetland is a well-preserved area located in a natural estuary and brackish water zone. There exist a large community of Salix triandra subsp. nipponica-S. koreensis, with S. triandra subsp. nipponica being the dominant species in the tidal forest. The metabolite composition of honey is diverse and influenced by the floral source and environmental factors. The aim of this study is to identify the plant origins of collected honey and examine changes in metabolite composition over time within the willow community in Janghang Wetland. Results: The study found that S. triandra subsp. nipponica was the most prominent component in the honey (50.7%), followed by Prunus padus (21.8%). In terms of pollen, P. padus was the most frequently detected (44.9%), followed by S. triandra subsp. nipponica (32.7%). The honey collected from Janghang Wetland was differentiated based on the collection time (March vs. April). Honeys collected in March exhibited a higher sucrose content than those gathered in April, while honeys collected in April demonstrated a higher mannose content compared to those obtained in March. The honey collected in Janghang Wetland had higher levels of sucrose and mannose content compared to commercial honey. In contrast, honey from an apiculture company had higher levels of lactitol and melibose. When comparing honey samples, it was found that Janghang Wetland honey showed lower levels of total phenolic content and total flavonoid content compared to commercial honeys. Conclusions: The metabolites in honey were found to be affected by both the collection time and geographical origin, and the results of metabarcoding in honey was influenced by the floral origin. These findings can assist in identifying the origin of honey and contribute to a better understanding of metabolite diversity in honey.

• Korean Chemical Engineering Research
• /
• v.52 no.5
• /
• pp.603-612
• /
• 2014

Lots of networks are constructed in a large scale industrial complex. Each network meet their demands through production or transportation of materials which are needed to companies in a network. Network directly produces materials for satisfying demands in a company or purchase form outside due to demand uncertainty, financial factor, and so on. Especially utility network and hydrogen network are typical and major networks in a large scale industrial complex. Many studies have been done mainly with focusing on minimizing the total cost or optimizing the network structure. But, few research tries to make an integrated network model by connecting utility network and hydrogen network In this study, deterministic mixed integer linear programming model is developed for integrating utility network and hydrogen network. Steam Methane Reforming process is necessary for combining two networks. After producing hydrogen from Steam-Methane Reforming process whose raw material is steam vents from utility network, produced hydrogen go into hydrogen network and fulfill own needs. Proposed model can suggest optimized case in integrated network model, optimized blueprint, and calculate optimal total cost. The capability of the proposed model is tested by applying it to Yeosu industrial complex in Korea. Yeosu industrial complex has the one of the biggest petrochemical complex and various papers are based in data of Yeosu industrial complex. From a case study, the integrated network model suggests more optimal conclusions compared with previous results obtained by individually researching utility network and hydrogen network.

• Management & Information Systems Review
• /
• v.17
• /
• pp.191-214
• /
• 2005

Recently, most enterprises are having a knowlege management boom. A number of books associated with the knowlege management are being published, countless public seminars are held, and many research councils have been organized studying it formally or informally as if not importing the system is like falling behind a fashion. However, there are not many cases that achieved success by constructing the system of knowledge management. Then, why the knowledge management is not so much effective despite so many voices wanting the change of management system and a lot of public lectures about it? I guess the reason is that most companies do not have concrete methodology. Seeing a result of a survey which reported that with spread of venture boom and successful examples being known widely, the outflow of precious human resources is accelerated and a large number of employees of conglomerates have already resigned or are considering separation from their positions, we can realize that are occurring a change which can be nearly called severance in an occupational view and an organization culture. The preference to a large enterprise or a public institution of labor is low today and the notion about a lifelong job is regarded as past remains. As for this, it could be said that the social atmosphere that pursued the stability of a job has been changed to the practical one that attaches importance to ability and pay. The way of thinking of employees has been changed while established organizations cannot satisfy their desire and this explains why important members of a company are flown out. The reason why superior human resources move to venture businesses is that they can do their likable work and also prove their ability as well as unconventional rewards. Although existing companies are trying to preserve important human resources through performance compensating stock option, temporary patching up of personnel management cannot retard the rushing wind of foundation and the outflow of labor. On the contrary, clumsy import of performance-based reward system not only fails to hire superior labor power but also can bring about a sense of incompatibility and conflicts among the remaining employees. Therefore, this thesis, focusing on how to choose, develop, and maintain the human resources, will suggest a future-aiming human resources management model of Korean enterprises after comparing and analyzing the actual condition of domestic companies and the trends of advanced corportaions.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.11 no.2
• /
• pp.207-219
• /
• 2016

Venture company refers to technology-intensive start-ups which is characterized by high high returns and risks to challenge new business to have new ideas and technology. These venture companies, ripple effect on the competitiveness of the national industry is large, and has emerged as a new industry that is able to overcome the difficulties of low growth, as an important element in regional development strategy, urban economy of not only activation, with a large impact on the regeneration and revitalization of the city that has lagged behind, has been recognized its importance. In this study, by investigating the influence of the Anyang city development strategy based on the location factor of venture companies for the activation of Anyang City urban development in satisfaction as an intermediary, empirically location of venture companies factor is trying to analyze the effect of parameters of Anyang city development strategy in relation to the satisfaction. Analysis method is to distribute the questionnaire were analyzed using the SPSS statistical program, the results are as follows. Location factors of venture companies, government support, transportation accessibility, venture integrated factors, it appears as four factors factors of support facilities, the analysis result venture firm location factors found to affect positive satisfied (+) It was. Secondly, in order to verify the parameter effects the result Anyang urban development strategy of using three steps regression analysis, as there is influence of the positive (+) mediated effect was investigated. These results, in order to increase the satisfaction of Anyang City, is not only the physical environmental elements, it is necessary to make the urban development strategies.

• Journal of Distribution Science
• /
• v.13 no.9
• /
• pp.59-70
• /
• 2015

Purpose - This study aims to suggest strategies for Korean enterprises advancing into the Vietnam bakery market by analyzing the effects of perceived values on brand preference and purchase intention among Korean and Vietnamese consumers. Research design, data, and methodology - The perceived value model designed includes functional (price, quality), emotional, and social values. The survey collected data from 500 consumers in Seoul (Korea) and HoChiMinh (Vietnam). The SPSS 18.0 package was used for analysis. Results - First, among Vietnamese consumers, perceived value had a positive (+) effect on global brand preference in the order of functional value of quality, social value, and the functional value of price. However, from an ethnocentric trend and brand image origin, emotional value had a negative effect on global brand preference. In contrast, among Korean consumers, perceived value had a positive (+) effect on global brand preference in the order of functional value of quality, the functional value of price, and the social value. However, emotional value had no effect on global brand preference. Second, for both Korean and Vietnamese consumers, perceived value had a significant positive effect on purchase intention. Third, unlike the Korean consumer, for the Vietnamese consumer, global brand preference had a significant effect on purchase intention. Conclusions - The study implies the following. First, the Vietnamese bakery market has a high proportion of middle-aged customers in their 40s (64%). In terms of monthly income, there was a large proportion (40%) of high-income earners (over $325). Therefore, bakery consumption can be seen as concentrated among middle-aged and high-income consumers. Based on this, bakery strategies should include efforts to increase purchase prices as well as ways to attract local consumers (large cities). Second, unlike Korean consumers, among Vietnamese consumers, the resistance to a global brand based on emotional value (the ethnocentric tendency and brand image origin) can be seen as relatively low. Thus, in the case of the Vietnam bakery market, to increase a global brand's preference, the company should develop a differentiated strategy so that Vietnamese consumers can recognize it better, focusing on product quality, good service quality, and price in the local environment and on social value for social development. Third, in the case of the Vietnamese customer, we found that social value exerts the greatest influence on purchase intention. Therefore, a brand that engenders an image of building the local Vietnamese community can achieve a higher social value and influence purchase intention. In addition, although Vietnamese consumers have ethnocentric tendencies in terms of products, we found that if it is a preferred global brand then there are intentions to purchase. Fourth, in the case of Vietnam, if the preference for global brands is formed, consumer awareness may be connected to purchase intention. Therefore, global brands operating in Vietnam should pay attention to how to improve consumer preferences for global brands in order to increase purchase intention.

• Journal of Arbitration Studies
• /
• v.27 no.4
• /
• pp.199-222
• /
• 2017

Currently, many punitive damages (or statutory damages) and class action laws are discussed in relation to the consumer damage relief system. It is in the background of the argument that the introduction of such a victim relief system will solve many small and large consumer damages. There are many cases in which the punitive damages compensation or the class action system are introduced in relation to the food safety damage naturally. Although the introduction of such a system can clearly help the consumer to relieve large-scale damage, it can not solve all the problems at once because the company can reject the system despite the introduction of such a system. In particular, class action lawsuits should have the same type of damage, but most of the damage caused by food safety is accompanied by physical harm, resulting in various complications such as the physical characteristics of the victim, the health environment. The class action system may not provide a solution in that the content and type of the damage may be different. In this regard, this study aims to investigate the introduction of the food safety damage relief system through the introduction of an administrative dispute settlement system by an administrative agency that occupies an absolute position in the existing consumer protection from this point of view. In reality, the Food and Drug Administration, which is the largest among government agencies related to food, operates a passive attitude consumer protection system such as function like guidance, supervision and surveillance. And it is necessary to make a complementary proposal. In the current law, there is only a small part of the consumer protection work that is positively legal, and even after the damage is scientifically identified, it is not possible to present the solution to the damage suffered by the consumer through legislation. This is a fact that has been raised. In this paper, we propose a reasonable and rapid disaster relief procedure through a separate mechanism within the administrative agency, which is the administration agency, that the dispute settlement procedure due to food safety damage is insufficient by solving the case through the court through counseling, dispute adjustment and civil proceedings. In order to solve the problem of food insecurity and the food industry, various ways of rational solution of the problem were considered. The possibility of (1) Establishment of a food safety dispute resolution committee; (2) Establishment of a food safety disaster relief committee; and (3) Establishment of a food safety disaster relief committee was discussed. In addition, a plan for the creation of a food damage compensation fund was also proposed.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.4
• /
• pp.106-116
• /
• 2016

MTO (Make to Order) is a manufacturing process in which manufacturing starts only after a customer's order is received. Manufacturing after receiving customer's orders means to start a pull-type supply chain operation because manufacturing is performed when demand is confirmed, i.e. being pulled by demand (The opposite business model is to manufacture products for stock MTS (Make to Stock), which is push-type production). There are also BTO (Build to Order) and ATO (Assemble To Order) in which assembly starts according to demand. Lean manufacturing by MTO is very efficient system. Nevertheless, the process industry, generally, which has a high fixed cost burden due to large-scale investment is suitable for mass production of small pieces or 'mass customization' defined recently. The process industry produces large quantities at one time because of the lack of manufacturing flexibility due to long time for model change or job change, and high loss during line-down (shutdown). As a result, it has a lot of inventory and costs are increased. In order to reduce the cost due to the characteristics of the process industry, which has a high fixed cost per hour, it operates a stock production system in which it is made and sold regardless of the order of the customer. Therefore, in a business environment where the external environment changes greatly, the inventory is not sold and it becomes obsolete. As a result, the company's costs increase, profits fall, and it make more difficult to survive in the competition. Based on the customer's order, we have built a new method for order system to meet the characteristics of the process industry by producing it as a high-profitable model. The design elements are designed by deriving the functions to satisfy the Y by collecting the internal and external VOC (voice of customer), and the design elements are verified through the conversion function. And the Y is satisfied through the pilot test verified and supplemented. By operating this make to order system, we have reduced bad inventories, lowered costs, and improved lead time in terms of delivery competitiveness. Make to order system in the process industry is effective for the display glass industry, for example, B and C groups which are non-flagship models, have confirmed that the line is down when there is no order, and A group which is flagship model, have confirmed stock production when there is no order.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.12
• /
• pp.1275-1280
• /
• 2015

A large-sized exciter that vibrates a two-ton component is required to simulate the field operating conditions of a counterweight of an excavator. However, it is difficult for a small-medium sized company to obtain a large exciter for the life test of a counterweight which is an equivalent counterbalancing weight that balances a load. Therefore, in this study, we developed life test equipment for evaluating the reliability of construction machinery weighing about two tons. It simulates the field operating conditions using rotational vibrators consisting of electric motors. A failure analysis of the counterweight was also performed for the major components. Field data acquired from various sites were applied to the life test design of the counterweight. Finally, a zero-failure qualification test based on the accelerated life test was designed, and there was no failure during the test, which guarantees a life of $B_5$ 10,000 hours.

• The Korean Journal of Financial Management
• /
• v.23 no.2
• /
• pp.143-170
• /
• 2006

We explore how stock returns and volatility have been impacted by securities market stimulating and controlling plans during the 1980-2004 period, using return analysis, event study, and BFL tests. First, we examine effectiveness of the stimulating plans for a depressed market and the controlling plans for an overheated market with respect to different firm sizes and industries as well as the whole market. KOSPI, large-sized, finance, and manufacturing company stock prices significantly rise following stimulating plans, implying that the plans are quite effective. Controlling plans also seem effective as stock prices stop rising and tend to decline following the plans. Second, we test whether securities market plans have any further impact with respect to fun sizes and industries in addition to the impact on the entire market. Only large-sized stocks show additional response to stimulating plans, while small-sized, electrical-electronic equipment, distribution, and manufacturing industries are further impacted by controlling plans. Third, the results of BFL tests show that volatility does not change around the announcement dates of stimulating and controlling plans. It appears that securities market plans have no impact on volatility. Only stock returns respond to the plans.

• Korean Journal of Human Ecology
• /
• v.23 no.1
• /
• pp.101-122
• /
• 2014

In this study, the Pine & Gilmore(1998) and Schmitt(1999, 2003), based on previous studies. Recent trends in large department stores and distribution outlets, discount stores and large retail centers, such as the consumer's experience is divided into internal and external fashion brand stores navigation study. Fashion Brand Stores are defined as the inside of the fashion brand store of the form that sells only the products of a fashion company's brand. Meanwhile, shopping center is defined as all the places at the inside and out of the shopping center excluding the inside of the fashion brand store. Likewise, definitions are clarified as such for use. As for the research method for this study, semi-structured focus group interviews were used since they could provide many more data compared to in-depth interviews. Accordingly, data was collected while carrying out free discussions while two to three subjects listened to each other's opinion regarding the key words raised by the interviewer and while thinking about their experience at the inside and outside of the fashion brand stores. As for the subjects, female consumers between the ages of 20 and 50 were targeted, and the interviews conducted with four, seven, four and three women in their 20s, 30s, 40s and 50s, were used, respectively. Likewise, there were a total of 18 subjects. Exploratory Study of Customer Experience area was classified into integration of significance and categorization. In particular, the contents were classified into elements of experience inside the fashion brand stores and fashion brand stores outsider experience in the shopping center elements and the elements of the common experience of fashion stores and shopping centers based on the results concerning the key contents identified in-depth from the customer aspect. The key experience elements at the inside of fashion brand stores were identified as VMD experience, emotional experience, and experience of the service provided by sales representatives. As for the key experience elements at the shopping center which is at the outside of the fashion brand store, they included service scape experience, cultural event experience, playful behavior experience. Meanwhile, elements of common experience included educational experience and exclusivity experience and human respect experience, which demonstrated some difference in terms of the contents.