• Geomechanics and Engineering
• /
• 제32권1호
• /
• pp.111-123
• /
• 2023

The slope of an open cut tunnel is located above the exit of the Leijia tunnel on the Changgan high-speed railway. During the excavation of the open cut tunnel foundation pit, the slope slipped twice, a large landslide of 92500 m³ formed. The landslide body and unstable slope body not only caused the foundation pit of the open cut tunnel to be buried and the anchor piles to be damaged but also directly threatened the operational safety of the later high-speed railway. Therefore, to study the stability change in the slope of the open cut tunnel under heavy rain and excavation conditions, a 3D numerical calculation model of the slope is carried out by Midas GTS software, the deformation mechanism is analyzed, anti-sliding measures are proposed, and the effectiveness of the anti-sliding measures is analyzed according to the field monitoring results. The results show that when rainfall occurs, rainwater collects in the open cut tunnel area, resulting in a transient saturation zone on the slope on the right side of the open cut tunnel, which reduces the shear strength of the slope soil; the excavation at the slope toe reduces the anti-sliding capacity of the slope toe. Under the combined action of excavation and rainfall, when the soil above the top of the anchor pile is excavated, two potential sliding surfaces are bounded by the top of the excavation area, and the shear outlet is located at the top of the anchor pile. After the excavation of the open cut tunnel, the potential sliding surface is mainly concentrated at the lower part of the downhill area, and the shear outlet moves down to the bottom of the open cut tunnel. Based on the deformation characteristics and the failure mechanism of the landslides, comprehensive control measures, including interim emergency mitigation measures and long-term mitigation measures, are proposed. The field monitoring results further verify the accuracy of the anti-sliding mechanism analysis and the effectiveness of anti-sliding measures.

• 한국구조물진단유지관리공학회 논문집
• /
• 제8권4호
• /
• pp.145-152
• /
• 2004

적색 침전물은 철성분이 가장 많이 포함되어 있었는데 이는 흙막이공과 지역 특성상 철분을 많이 포함하고 있는 지하수에 원인이 있는 것으로 판단된다. 백색 침전물의 경우 가장 많이 발견된 성분은 산화칼슘으로 건설당시 지반보강을 위하여 시행한 그라우팅 주입재인 시멘트가 지하수와 함께 터널 내부로 유입된 침전물로서 터널의 안전성에는 영향이 없을 것으로 판단된다. 흑색 침전물은 정거장 시점 및 종점 근접부 터널에서 발생되고 있으며, 이는 청소용수 퉁 이물질이 터널 내 배수시설로 유입되어 백색 또는 적색 침전물과 혼합된 침전물이다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2923-2928
• /
• 2007

The study of model for velocity and turbulence within the urban canopy was carried out. To evaluate existing urban model we conducted wind tunnel experiment and large-eddy simulation (LES). Mean velocity profile and turbulence are measured within simple three different obstacle arrays. To obtain supplemental data and to verify morphological model large-eddy simulation was performed. Several methods have been used to achieve embodying the flow field in urban area. Recently, morphological method obtaining flow parameters from the statistical or physical representation of obstacle elements is a arising method. It was found that all morphological model, evaluated in this study, over predict the friction velocity, most sensitive one among the flow parameters. Velocity and turbulence in the urban canopy layer were improved by the correction using 'true' friction velocity.

• Wind and Structures
• /
• 제31권3호
• /
• pp.197-207
• /
• 2020

Knowledge on the design value of extreme wind pressure coefficients (EWPC) of a specific zone of buildings is essential for the wind-resistant capacity of claddings. This paper presents a method to estimate the representative EWPC introducing the multivariate extreme value model. The spatial correlations of the extreme wind pressures at different locations can be consider through the multivariate extreme value. The moving average method is also adopted in this method, so that the measured point pressure can be converted to wind pressure of an area. The proposed method is applied to wind tunnel test results of a large flat roof building. Comparison with existing methods shows that it can give a good estimation for all target zones with different sizes.

• 한국터널지하공간학회 논문집
• /
• 제11권2호
• /
• pp.175-188
• /
• 2009

도심지 등 지역적인 여전에 의하여 기존의 지하 공동 또는 터널에 근접하여 발파를 이용한 새로운 터널을 굴착할 경우, 새로운 터널의 굴착으로 인하여 지반이 이완되고 따라서 기존 지하 공동의 안정성에 문제가 발생할 수 있다. 이러한 가존 지하 공동의 안정성에 문제를 발생시킬 수 있는 가장 큰 요소로는 기존 지하 공동과 신설 터널의 이격거리가 될 수 또한 신설 터널 굴착으로 인한 소성영역의 발생에 따른 지반 이완을 문제 심을 수 있다. 따라서 본 연구에서는 기존 광역 상수관과 신설 터널의 이격거리에 따른 기존 광역 상수관의 안정성을 평가하기 위하여 이격거라가 다른 여섯 가지 모델에 대해 석고를 이용힌 2차원 축소 모형실험을 실시하였다. 실험 결과는 터널 굴착과정과 파괴 단계에서 발생된 변위 벡터와 균열양상으로 표현하였다. 터널 굴착과정 중 발생하는 변위를 분석하면, 터널과 광역 상수관의 간격이 상수관 직경의 2.5배 (2.5D)까지는 이격거리가 증가함에 따라 감소하는 경향을 보인다. 그러나 중심 간격이 2.5D를 넘으면 추가변위는 발생하지 않았다.

• 터널과지하공간
• /
• 제15권2호
• /
• pp.111-118
• /
• 2005

연구지역은 옥천변성대에 속하며 단층파쇄대가 터널굴착방향과 평행하게 존재하여 막장면의 자립성 저하 및 이에 따르는 터널 주변지반의 이완 등으로 터널 내에 과도한 변위가 발생하였다. 이에 따라 단층파쇄대의 영향범위를 파악하고 특성을 분석하기 위하여 TSP(Tunnel Seismic Prediction)탐사를 수행하였다. 또한 막장면 조사와 시추조사를 병행 실시하여 거동원인을 분석하고 전방 파쇄대의 예측을 통하여 터널 굴착 및 지보에 영향을 주는 지질구조대나 용수대의 위치와 규모를 확인하였다. 조사결과를 토대로 터널형상 및 그에 따른 지층상태를 3차원으로 모델링 하였다. 모델링된 개체 내에 포함된 여러 변수(함유량, 물성치, 암반등급 등 모든 정량적인 수치)는 지구통계학적 기법을 통해 분석하였다. 모델링 결과를 분석하면 단층파쇄대에 의한 풍화대의 분포가 터널우측을 중심으로 발달하면서 좌측으로 그 범위가 감소하고 있다. 단층파쇄대는 주향 $N0\~5^{\circ}E$, 경사 NW의 방향성을 가지며, 여러 개의 지질이상대를 포함한 대규모의 파쇄대로 이루어진 것으로 확인되었다. 터널내 과대 변위는 해당구간에 밀집된 불연속면의 상호교차 및 단층대에 의한 터널 좌우측 암반강도 불균형으로 편하중이 발생한 것으로 판단되며 그라우팅 등의 터널보강공법이 필요한 것으로 판단된다.

• Wind and Structures
• /
• 제31권6호
• /
• pp.483-493
• /
• 2020

Large cylindrical floating-roof tanks, constructed as oil containers, are usually distributed regularly in open area and easily exposed to severe wind loads. However, wind pressures around these grouped squat tanks appear to have not been clearly given in design codes or thoroughly studied in existing researches. This paper conducts a detailed investigation on wind loads on the external wall of a four-tank group in square arrangement. To achieve that, wind tunnel tests are carried out on both empty and full tank groups, considering various wind angles and spacing. Results show that 3 regions in elevation can be identified on the tank shell according to the circumferential wind pressure distribution. The upper 2 regions cover a relatively small portion of the shell where excessive negative pressures are spotted, setting an alarm to the design of the top angle and stiffening rings. By comparing results on grouped tanks to those on an isolated tank, grouping effects concerning wind angle, tank position in group and spacing are discussed. Deviations on pressure distributions that will compromise structural safety are outlined, including the increase of negative pressures, the shift of maximum pressure locations as well as the change of positive pressure range. And, several potentially unfavourable wind pressure distributions are selected for further analyses.

• 대한기계학회논문집B
• /
• 제21권1호
• /
• pp.89-98
• /
• 1997

Compression waves propagating in a high speed railway tunnel impose large pressure fluctuations on the train body or tunnel structures. The pressure fluctuations can cause ear discomfort for the passengers and increase the aerodynamic resistance of trains. As a fundamental research to resolve the pressure wave phenomenon in the tunnel, a steady theory of Chester-Chisnell- Whitham was applied to a simple shock tube with a sudden cross-sectional area reduction to model trains inside the tunnel. The results of the present theoretical analysis were compared with the experiments of the shock tube. The results show that the reflected compression wave from the model becomes stronger as the strength of incident compression wave and the blockage ratio increase. However, the compression wave passing through the model is not strongly dependent on the blockage ratio. The theoretical results are in good agreement with the experiments.

• 한국안전학회지
• /
• 제28권5호
• /
• pp.35-40
• /
• 2013

Recently reclamation land is largely developed to utilize the land according to economic growth. The soil of landfill is soft, low shear strength, which makes it difficult to use the equipment. A large movement is occurred on the utility tunnel under construction. The inclined land with high water level and underground facilities are widely distributed and the excess pore water pressure may occur under construction similarly to this study. Some different conditions are made to design result, such as 4m of soil piling near the construction area, heavy rainfall during 2nd excavation that may cause flow liquefaction. To analyze the cause of transverse lateral movement, Three dimensional analysis are performed to four load cases, which is original design condition, flow liquefaction by heavy rainfall, unsymmetric lateral soil pressure, and both of them simultaneously. Ten steps of full construction stage, 1st excavation for utility tunnel, construction of utility tunnel, 1st refill, piling soil from 1m to 4 m, 2nd excavation for drainage culvert, liquefaction around the utility tunnel, construction of drainage culvert and 2nd refill, are take into account to investigate the cause of movement.

• 한국지반신소재학회논문집
• /
• 제15권2호
• /
• pp.55-64
• /
• 2016

산악지 풍화대를 관통하는 도로 NATM터널에서 록볼트+숏크리트 타설과 강관다단 그라우팅 보강작업 진행 중, 터널 천단부붕락(토피고 25m) 및 지표면 함몰($V=12m{\times}14m{\times}$높이 5m = $840m^3$)과 터널 내 과다한 변위가 발생하였다. 원활한 후속 공사를 위해 각종 조사 자료와 시험, 분석을 통해 함몰(땅꺼짐) 원인을 분석하고 수치해석을 통하여 적절한 갱내외 보강범위를 다양하게 검토한 후 대책공법을 제시하였다. 수치해석 결과 터널 종횡방향 0.5D, 터널 상단 1.0D에서 보강효율이 가장 좋은 것으로 분석되었다. 터널 지상부는 시멘트밀크그라우팅으로, 터널 내부는 대구경강관다단 3열 중첩으로 보강하였다. 라이닝에 철근을 보강하고 잔여 터널구간에 선진수평보링을 적용하여 사전에 막장 전방상태를 파악하고 필요시 적절한 보강을 하도록 하였다.