• 복식
• /
• 제62권1호
• /
• pp.76-89
• /
• 2012

This study was performed to offer the basic data for the design of farm shoes. 265 Korean female farmers aging between the 40s to the 80s volunteered for this study and we measured 40 items on each foot with the 3D foot scanner. First, the differences between farmers' feet and non-farmers' feet were analyzed. Farmers' feet were thicker in the instep areas, but had lower arch height than non-farmers' feet. In addition, farmer's feet were tilted to the inside. Next, eight factors were extracted among the 40 measuring items, and the classification criteria of the foot shape was analyzed. The important factors were: size of foot length and volume of ankle, malleolus height and size, volume of the front part of ankle, medial & lateral ball width, and vertical size of foot. Third, three clusters according to the foot shapes were categorized by cluster analysis of eight factor scores. Foot type 1 was medium in foot length, big in thickness, large in lateral ball width, small in toe 1 angle, and tilted to the inside. Foot type 2 was long and slim, and big in toe 5 angle. Foot type 3 was short in foot length, medium in volume of the front part of ankle, large in medial ball width, and big in toe 1 angle. Despite its shortness, foot type 3 was thick and showed severe deformation in toe 1. Lastly, the frequency distributions of the foot types in each age group were analyzed. Female farmers of the forties showed high frequency in type 1 and other age groups showed high frequency in type 2. The older female farmers showed higher frequency of type 3.

• International Journal of Fluid Machinery and Systems
• /
• 제10권1호
• /
• pp.40-46
• /
• 2017

Small valves including ball valves, gate valves and butterfly valves have been adopted in the fields of steam power generation, petrochemical industry, carriers, and oil tankers. Butterfly valves have normally been applied to fields where in narrow places installing the existing valves such as gate valves and ball valves have proven difficult due to the surrounding area and the heavier of these valves. Butterfly valves are used to control the mass flow of the piping system under low pressure by rotating the circular disk installed inside. The butterfly valve is benefitted by having simpler structure in which the flow is controlled by rotating the disc circular plate along the center axis, whereas the weight of the valve is light compared to the gate valve and ball valve above-mentioned, as there is no additional bracket supporting the valve body. The manufacturing company needs to acquire the performance and life test equipment, in the case of adopting the improving factors to detect leakage and damage on the seat of the valve disc. However, small companies, which are manufacturing the industrial valves, normally sell their products without the life test, which is the reliability test and environment test, because of financial and manpower problems. Furthermore, the failure mode analysis of the products failed in the field is likewise problematic as there is no system collecting the failure data on sites for analyzing the failures of valves. The analyzing and researching process is not arranged systematically because of the financial problem. Therefore this study firstly tried to obtain information about the failure data from the sites, analyzed the failure mode based on the field data collected from the customers, and then obtained field data using measuring equipment. Secondly, we designed and manufactured the performance and life test equipment which also have the real time monitoring system with the naked eye for the butterfly valves. The concept of this equipment can also be adopted by other valves, such as the ball valve, gate valve, and various others. It can be applied to variously sized valves, ranging from 25 mm to large sized valves exceeding 3000 mm. Finally, this study carries out the life test with square wave pressure, using performance and life test equipment. The performance found out that the failures from the real time monitoring system were good. The results of this study can be expanded to the other valves like ball valves, gate valves, and control valves to find out the failure mode using the real time monitoring system for durability and performance tests.

• International Journal of Precision Engineering and Manufacturing
• /
• 제8권1호
• /
• pp.52-58
• /
• 2007

We propose a new contact detection algorithm for fine pitch wire bonding. Fast and stable contact detection of the z-axis in wire bonding is extremely important to maintain the quality of fine pitch gold wire bonding processes, which use a small pad less than $70{\mu}m$ in diameter. A small perturbation in the contact detection time causes a large difference in the size of the formed squashed ball. The new detection method is based on a statistical approach and designed for a discrete Kalman filter. It is faster and has smaller detection time variations than conventional detection methods. Experimental results are presented to demonstrate the advantages of the proposed algorithm.

• 대한세포병리학회지
• /
• 제6권2호
• /
• pp.214-218
• /
• 1995

Cytopathologic findings of two cases of adenoid cystic carcinoma of the trachea are reported. The carcinomas grew as an intratracheal mass. By bronchial washing, brushing and/or post-bronchoscopic sputum cytology, large cohesive sheets, lobulated clusters, or three dimensional ball-like structures were obtained. They had numerous cyst-like spaces containing characteristic globular basophilic material. The tumor cells were uniform and had a small amount of cytoplasm. Nuclei were small and hyperchromatic, Nucleoli were occasionally observed. The cytological diagnosis was confirmed by bronchoscopic biopsies. Since the cytomorphology of adenoid cystic carcinoma is characteristic, review of these cytologic features will enhance the diagnostic accuracy in exfoliative cytology of the respiratory tract.

• 한국가금학회지
• /
• 제10권2호
• /
• pp.123-128
• /
• 1983

본 시험에 공시된 오골계 50수는 본 대학교 가금학교실에서 부화한 것이고. 메추리 50수는 경남금해에서 부화한 것이었다. 본 시험은 부화후 24시간경에 실시하였으며, 조사항목은 12개로서 생체중, 두, 안구, 뇌, 심장, 간장, 신장, 위, 소장, 대장 및 란황낭의 중량을 측정한 종과는 다음과 같았다. 1. 메추리의 조사항목중, 생체중량은 6.54$\pm$0.082g, 두의 중량은 1.38$\pm$0.013g, 안구의 중량은 0.29$\pm$0.004g, 뇌의 중량은 0.24$\pm$0.006g, 심장의 중량은 0.08$\pm$0.002g, 간장의 중량은 0.21$\pm$0.005g, 폐의 중량은 0.06$\pm$0.002g, 신장의 중량은 0.05$\pm$0.002g, 위의 중량은 0.46$\pm$0.010g, 소장의 중량은 0.24$\pm$0.008g, 대장의 중량은 0.10$\pm$0.004g 그리고 란황낭의 중량은 0.28$\pm$0.016이었다. 2. 오골계의 조사항목중, 생체중량은 26.60$\pm$0.491g, 두의 중량은 4.28$\pm$0.071g, 안구의 중량은 0.64$\pm$0.039g, 뇌의 중량은 0.55$\pm$0.025g, 심장의 중량은 0.21$\pm$0.012g, 간장의 중량은 0.77$\pm$0.030g, 폐의 중량은 0.31$\pm$0.006g, 신장의 중량은 0.08$\pm$0.006g, 위의 중량은 1.53$\pm$0.076g, 소장의 중량은 0.73$\pm$0.036g, 대장의 중량은 0.42$\pm$0.031g 그리고 란황낭의 중량은 2.65$\pm$0.297g 이었다. 3. 메추리와 오골계의 중란중량에 대한 생체중량 및 각 장기중량의 비율을 타 실용계와 비교한 결과, 메추리의 안구중량과 뇌중량은 타 실용계와 오골계에 비하여 월등히 큰 것이었고, 오골계의 뇌의 중량, 심장의 중량, 간장의 중량, 폐장의 중량, 신장의 중량, 위의 중량 및 소장의 중량은, 타 실용계와 메추리에 비하여 적은 경향이었다는 것이 특이하였으며, 그 외의 항목간에는 대동소이하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.697-701
• /
• 1996

King Sejong's Striking water-clock which brought in use on the first of July in 1434 was mainly composed of timekeeping and time announcing parts signalling twelve double-hours, and five night-watches and night-watch-divisions automatically by means of ball-operating jackworks. The clock was arranged with dual timekeeping system, the one for a full day(twelve double-hours) and the other for five night-watches achieving twelve double-hours and one-hundred interval horary systems. The vessels were arrayed in inflow-type water-clock, a large reservoir on the highest story, a constant-level tank for supplying water to the measuring vessel evenly in the middle, and the lowest tank to receive water from the above constant-level tank. An indicator-rod on the float was raised upwards depending on the water-level increase to show timing scales and also to release small bronze balls from the ball-rack mechanisms implanted on the measuring vessel to signal timing intervals.

• 한국음향학회지
• /
• 제16권4호
• /
• pp.21-28
• /
• 1997

본 연구에서는 빈경하중과 축회전 속도를 변화시켜 가며 하중으로 인한 베어링의 부하-변위량 특성을 Harris 이론과 비교분석하였다. 실험결과 결함이 없는 경우 하중이 적을 때는 Harris이론과 비교적 잘 일치하나, 하중이 증가할 수록 구동축의 변곡, 볼베어링 하중의 불균형 등의 영향을 받아 이론값과 차이를 보였다. 반경방향 하중이 있는 단일결함과 다중결함의 경우 하중이 증가함에 따라 변위량의 변화는 축심변위량 보다 반경변위량이 더욱 커지게 된다는 것을 알았다. 베어링의 결함상태에 따라 하중과 변위량의 기울기인 부하-변위량 특성을 구함으로써 볼베어링의 결함유무를 검출하였다.

• Imaging Science in Dentistry
• /
• 제48권4호
• /
• pp.255-259
• /
• 2018

Purpose: This study proposes a new ball-type phantom for evaluation of the image layer of panoramic radiography. Materials and Methods: The arch shape of an acrylic resin phantom was derived from average data on the lower dental arch in Korean adult males. Metal balls with a 2-mm diameter were placed along the center line of the phantom at a 4-mm mesiodistal interval. Additional metal balls were placed along the 22 arch-shaped lines that ran parallel to the center line at 2-mm buccolingual intervals. The height of each ball in the horizontal plane was spaced by 2.5 mm, and consequently, the balls appeared oblique when viewed from the side. The resulting phantom was named the Panorama phantom. The distortion rate of the balls in the acquired image was measured by automatically calculating the difference between the vertical and horizontal length using $MATLAB^{(R)}$. Image layer boundaries were obtained by applying various distortion rate thresholds. Results: Most areas containing metal balls (91.5%) were included in the image layer with a 50% distortion rate threshold. When a 5% distortion rate threshold was applied, the image layer was formed with a small buccolingual width along the arch-shaped center line. However, it was medially located in the temporomandibular joint region. Conclusion: The Panorama phantom could be used to evaluate the image layer of panoramic radiography, including all mesiodistal areas with large buccolingual width.

• Elastomers and Composites
• /
• 제53권3호
• /
• pp.158-167
• /
• 2018

In this study, in-situ trans-selective polymerization of isoprene was carried out using titanium-based Ziegler-Natta catalysts. The catalysts were prepared by high-energy ball milling. Individually Large-inner-diameter carbon nanotubes (CNTL), and hydroxylated carbon nanotubes (CNTOH), along with magnesium chloride ($MgCl_2$) were used as the carriers for the catalysts. The optimum ball-milling time for preparing the $CNT/MgCl_2/TiCl_4$ Ziegler-Natta catalysts was 4 h. The $CNTOH/MgCl_2/TiCl_4$ catalyst showed a higher efficiency than that of the $CNTL/MgCl_2/TiCl_4$ catalyst, based on the rate of polymerization. The effects of the CNT-filler type on the isoprene polymerization behaviors and polymer properties were investigated. The morphologies of the trans-1,4-polyisoprene (TPI)/CNT and TPI/CNTOH nanocomposites exhibited a tube-like shape, and the CNTL and CNTOH fillers were well dispersed in the TPI matrix. In addition, the thermal stability of TPI significantly increased upon the introduction of a small amount of both CNTL/CNTOH fillers (0.15 wt%), owing to the satisfactory dispersion of the CNTL/CNTOH in the TPI matrix.

• 방송공학회논문지
• /
• 제28권1호
• /
• pp.79-89
• /
• 2023

다시점 디스플레이는 관찰자의 위치에 따라 적절한 시점의 영상을 제공할 수 있어 시청자에게 입체적인 효과를 줄 수 있는 가장 실용적인 기술로 여겨진다. 하지만 대부분의 다시점 디스플레이는 평면 형태로서 시청자가 전방의 제한된 시야각 내에서만 입체 영상을 볼 수 있는 단점이 있다. 본 논문에서는 시청 영역을 360도로 확장하여 완전 시차 시차를 제공하는 구 대칭성을 가지는 볼 렌즈를 적용한 광학계로 구성된 구형 디스플레이를 제안하였다. 제안한 시스템에서 각각의 프로젝션 렌즈는 소형 모듈화하여 어레이로 구성할 수 있으며 모듈 어레이를 볼 렌즈 주위에 구면으로 배치하여 수직, 수평 시차를 제공할 수 있다. 적용된 광학 모듈을 통해 볼 렌즈 내부 중앙에 이미지가 결상되고, 사용자는 디스플레이의 시야창을 통해 선명한 영상을 시청할 수 있다. 따라서 볼 렌즈의 구면 수차를 극복하여 넓은 시야 부피를 제공하는 360도 완전 시차 디스플레이의 실현 가능성을 실험적으로 확인하였다.