• Computers and Concrete
• /
• 제29권2호
• /
• pp.93-105
• /
• 2022

The degrees of freedom (DOFs) of high-rise structures increase rapidly due to the need for refined analysis, which poses a challenge toward a computationally efficient method for numerical analysis of high-rise structures using the finite element method (FEM). This paper presented an efficient iterative method, an algebraic multigrid (AMG) with a Jacobi overrelaxation smoother preconditioned conjugate gradient method (AMG-CG) used for solving large-scale structural system equations running on heterogeneous platforms with parallel accelerator graphics processing units (GPUs) enabled. Furthermore, an AMG-CG FEM application framework was established for the numerical analysis of high-rise structures. In the proposed method, the coarsening method, the optimal relaxation coefficient of the JOR smoother, the smoothing times, and the solution method for the coarsest grid of an AMG preconditioner were investigated via several numerical benchmarks of high-rise structures. The accuracy and the efficiency of the proposed FEM application framework were compared using the mature software Abaqus, and there were speedups of up to 18.4x when using an NVIDIA K40C GPU hosted in a workstation. The results demonstrated that the proposed method could improve the computational efficiency of solving structural system equations, and the AMG-CG FEM application framework was inherently suitable for numerical analysis of high-rise structures.

• 대한토목학회논문집
• /
• 제28권5A호
• /
• pp.685-690
• /
• 2008

최근 대규모의 지진피해로 인해 내진설계에 대한 관심이 높아지면서, LRB(Lead Rubber Bearing), FPS(Friction Pendulum System) 등 다양한 지진격리장치에 대한 연구가 진행되고 있다. 본 연구에서 E-Shape 강재이력댐퍼를 이용한 지진격리장치의 성능 평가를 위해 E-Shape 댐퍼의 동적거동 실험을 수행하였으며, 이를 바탕으로 해석적 연구를 위한 수치모델을 제안하였다. 또한, 제안된 E-Shape 강재이력댐퍼의 수치모델을 6자유도를 가진 5층 건물에 적용하여 LRB 시스템과 이력거동을 비교하여 지진격리성능 평가를 수행하였다. 본 연구를 통하여 제안된 수치모델은 실제 E-Shape 강재이력댐퍼의 동적거동을 적절히 묘사할 수 있으며, E-Shape 강재이력댐퍼는 비선형 거동을 통한 에너지를 적절히 소산시킴으로서 기존 시스템과 비교하여 충분히 지진격리성능을 발휘할 수 있을 것으로 사료된다.

• 한국IT서비스학회지
• /
• 제23권1호
• /
• pp.1-10
• /
• 2024

The IT environment is changing due to the acceleration of digital transformation in enterprises and organizations. This expansion of the digital space makes centralized cybersecurity controls more difficult. For this reason, cyberattacks are increasing in frequency and severity and are becoming more sophisticated, such as ransomware and digital supply chain attacks. Even in large organizations with numerous security personnel and systems, security incidents continue to occur due to unmanaged and unknown threats and vulnerabilities to IT assets. It's time to move beyond the current focus on detecting and responding to security threats to managing the full range of cyber risks. This requires the implementation of asset Inventory for comprehensive management by collecting and integrating all IT assets of the enterprise and organization in a wide range. IT Asset Management(ITAM) systems exist to identify and manage various assets from a financial and administrative perspective. However, the asset information managed in this way is not complete, and there are problems with duplication of data. Also, it is insufficient to update of data-set, including Network Infrastructure, Active Directory, Virtualization Management, and Cloud Platforms. In this study, we, the researcher group propose a new framework for automated 'Comprehensive IT Asset Management(CITAM)' required for security operations by designing a process to automatically collect asset data-set. Such as the Hostname, IP, MAC address, Serial, OS, installed software information, last seen time, those are already distributed and stored in operating IT security systems. CITAM framwork could classify them into unique device units through analysis processes in term of aggregation, normalization, deduplication, validation, and integration.

• 한국산업보건학회지
• /
• 제5권2호
• /
• pp.147-159
• /
• 1995

This study was conducted to introduce fundamental data of hand-arm vibration and noise exposure levels with impact wrenches(double-hammer impact wrenches and oil-pulse impact wrenches) used in automobile assembly lines considering the process variables and tool variables. In studing, products per day, required time screwing the bolts or nuts per bolts or nut were considered as process variables, and capacity of bolts or nuts, air consumptions per minute, tool weights, RPM were considered as tool variables. Hand-arm vibration levels of 3 axis in each hand were measured using the instruments compling with ISO/DIS 5349 and noise levels were measured using a noise logging dosimeter. The results were as follows : 1. Required time to screwing the bolt or nut by oil-pulse impact wrenches is shorter than double-hammer impact wrenches but total daily exposure time of oil-pulse impact wrenches was higher than double-hammer impact wrenches because the number of bolts or nuts per cycle was many. 2. Oil-pulse impact wrenches have been used to screwing the large bolt or nut in comparing with double-hammer impact wrenches and required time to screwing the bolts or nuts were shorter than double-hammer impact wrenches because oil-pulse impact wrenches were using high RPM and large air consumption per minute. Noise level of oil-pulse impact wrenches was 8 dB(A) lower than double-hammer impact wrenches. 3. Dominant hand-arm vibration levels of double-hammer impact wrenches in each hand were $8.24m/sec^2$ of Zh axis in right hand and $9.60m/sec^2$ of Xh axis in left hand. Dominant hand-arm vibration level of oil-pulse impact wrenches in each hand was $2.59m/sec^2$ of Xh axis in right hand and $3.23m/sec^2$ of Yh axis in left hand. 4. In double-hammer impact wrenches, corresponding hand-arm vibration levels of Xh, Yh, Zh axis in left hand were higher than hand-arm vibration levels of right hand in 3 axis. In oil-pulse impact wrenches, Xh axis of right, Yh axis of left, Zh axis of left were higher than the corresponding hand-arm vibration levels of Xh, Yh, Zh axis in right and left hand. 5. Correlation coefficients among Xh, Yh. Zh axis of right and left hand hand-arm vibration levels in double-hammer impact wrenches and oil-pulse impact wrenches were commonly high in Yh axis and correlation coefficients of Yh axis in double-hammer impact wrenches and oil-pulse impact wrenches were 0.76 and 0.86,respectively. 6. As a measure repetitiveness, plotting total daily exposure time with the number of bolts or nut per cycle, direct correlation was shown between repetitiveness and hand-arn vibration exposure, and correlation coefficient between the number of bolts or nut per cycle and total daily exposure time in double-hammer impact wrenches, oil-pulse impact wrenches were 0.84 and 0.50, respectively. 7. Considering the total acceleration level and tool variables in double-hammer impact wrenches and oil-pulse impact wrenches, air consumption in right hand, and bolt or nut capacity in left hand were commonly the variable that explainability was high. Considering the noise and tool variables in double-hammer impact wrenches and oil-pulse impact wrenches, air consumption per minute was commonly the variable that explainability was high.

• 한국운동역학회지
• /
• 제16권3호
• /
• pp.149-163
• /
• 2006

The purpose of this study was to compare the lower extremity's joint and segment coupling patterns between forward and backward running in subjects who were twelve healthy males. Three-dimensional kinematic data were collected with Qualisys system while subjects ran to forward and backward. The thigh internal/external rotation and tibia internal/external rotation, thigh flexion/extension and tibia flexion/extension, tibia internal/external rotation and foot inversion/eversion, knee internal/external rotation and ankle inversion/eversion, knee flexion/extension and ankle inversion/eversion, knee flexion/extension and ankle flexion/extension, and knee flexion/extension and tibia internal/external rotation coupling patterns were determined using a vector coding technique. The comparison for each coupling between forward and backward running were conducted using a dependent, two-tailed t-test at a significant level of .05 for the mean of each of five stride regions, midstance(1l-30%), toe-off(31-50%), swing acceleration(51-70%), swing deceleration(71-90), and heel-strike(91-10%), respectively. 1. The knee flexion/extension and ankle flexion/extension coupling pattern of both foreward and backward running over the stride was converged on a complete coordination. However, the ankle flexion/extension to knee flexion/extension was relatively greater at heel-strike in backward running compared with forward running. At the swing deceleration, backward running was dominantly led by the ankle flexion/extension, but forward running done by the knee flexion/extension. 2. The knee flexion/extension and ankle inversion/eversion coupling pattern for both running was also converged on a complete coordination. At the mid-stance. the ankle movement in the frontal plane was large during forward running, but the knee movement in the sagital plane was large during backward running and vice versa at the swing deceleration. 3. The knee flexion/extension and tibia internal/external rotation coupling while forward and backward run was also centered on the angle of 45 degrees, which indicate a complete coordination. However, tibia internal/external rotation dominated the knee flexion/extension at heel strike phase in forward running and vice versa in backward running. It was diametrically opposed to the swing deceleration for each running. 4. Both running was governed by the ankle movement in the frontal plane across the stride cycle within the knee internal/external rotation and tibia internal/external rotation. The knee internal/external rotation of backward running was greater than that of forward running at the swing deceleration. 5. The tibia internal/external rotation in coupling between the tibia internal/external rotation and foot inversion/eversion was relatively great compared with the foot inversion/eversion over a stride for both running. At heel strike, the tibia internal/external rotation of backward running was shown greater than that of forward(p<.05). 6. The thigh internal/external rotation took the lead for both running in the thigh internal/external rotation and tibia internal/external rotation coupling. In comparison of phase, the thigh internal/external rotation movement at the swing acceleration phase in backward running worked greater in comparison with forward running(p<.05). However, it was greater at the swing deceleration in forward running(p<.05). 7. With the exception of the swing deceleration phase in forward running, the tibia flexion/extension surpassed the thigh flexion/extension across the stride cycle in both running. Analysis of the specific stride phases revealed the forward running had greater tibia flexion/extension movement at the heel strike than backward running(p<.05). In addition, the thigh flexion/extension and tibia flexion/extension coupling displayed almost coordination at the heel strike phase in backward running. On the other hand the thigh flexion/extension of forward running at the swing deceleration phase was greater than the tibia flexion/extension, but it was opposite from backward running. In summary, coupling which were the knee flexion/extension and ankle flexion/extension, the knee flexion/extension and ankle inversion/eversion, the knee internal/external rotation and ankle inversion/eversion, the tibia internal/external rotation and foot inversion/eversion, the thigh internal/external rotation and tibia internal/external rotation, and the thigh flexion/extension and tibia flexion/extension patterns were most similar across the strike cycle in both running, but it showed that coupling patterns in the specific stride phases were different from average point of view between two running types.

• 한국항공우주학회지
• /
• 제46권6호
• /
• pp.503-512
• /
• 2018

SAR(Synthetic Aperture Radar)는 레이더를 이용하여 얻은 신호를 처리해 영상을 획득하는 기술로서, SAR 영상의 활용도와 고해상도 영상에 대한 요구가 증가하고 있는 상황이다. 따라서 본 연구에서는 고해상도 영상 데이터의 고속 처리를 위해 SAR 영상처리 알고리즘을 다중코어 기반의 컴퓨터 구조에서 최적의 성능을 낼 수 있도록 구현하기 위한 연구를 수행했다. 고해상도 영상에 따른 방대한 양의 입출력에 의한 성능 저하를 개선시키기 위해 메모리를 최대한 활용하는 성능 최적화 기법을 적용하고 OpenMP의 동적 스케쥴링 기법과 중첩 병렬성(nested parallelism)을 사용해 코드의 병렬화 비율을 높였다. 그 결과 전체 계산시간을 줄일 뿐만 아니라 병렬 성능의 최대 한계치를 크게 높일 수 있었으며, 제안된 기법을 10개 코어를 가진 다중코어 시스템에 적용한 결과 기존 대비 8배 이상의 성능 향상이 있었다. 본 연구 결과는 대용량 메모리를 가진 다중코어 시스템을 대상으로 하는 고해상도 SAR 영상처리 소프트웨어 개발에 효과적으로 활용될 수 있을 것으로 기대된다.

• 디자인학연구
• /
• 제11권3호
• /
• pp.127-134
• /
• 1998

급속도로 성장하던 우리기업이 요즘 경제불황으로 주춤하고있다. 한국의 경제발전과 함께 해온 대기업들은 그 반세기 동안 한국의 경제성장을 위해 국민과 함께 열심히 뛰어왔다. 그런데 지금은 그렇게 열심히 달려온 대기업들이 문어발 팽창이니 횡포니하는 비난을 당하고 있다. 대기업들이 잇달아 도산하거나 경영위기를 맞고 있으며 기업의 이미지가 실추되었을 뿐만 아니라 많은 사람들에게 외면당하고 있다. 이제 끝없이 하락하고 있는 대기업의 이미지를 향상시키기 위해 대기업들은 이미지 변신이 중요한 시기가 되었다. 요즘 같이 경제불황에는 과다한 기업 PR광고보다는 사외보를 통하여 실추된 기업의 이미지를 향상시켜야 할 것이다. IMF의 한파로 책사보기도 힘든 요즘 무기자로 배표되는 사외보는 서민들에게 크나큰 정보지로 자리잡고 있다. 그 어느때 보다도 사외보의 역할은 정보지로써 자리매김해가고 있으며 기업PR를 위해 중요하게 되었다. 사외보는 독자대상을 회사밖에 두고 회사PR를 목적으로 간행하는 것으로 조직을 둘러싼 환경을 개선하여 기업의 이미지를 높이고 관계공중들로 부터 호의를 조성하고 나아가 마케팅을 촉진시킴으로써 이윤을 추구하기 위해 발간된다. 이에 본문 논문는 실추된 기업이미지향상을 위한 사외보 편집디자인의 중요성에 대해 논하였다. 우선 현재5개 그룹의 사외보편집디자인을 구성요소별로 분석하였고 그 결과 개선방안을 제안한다.·표지의 차별화 ·명쾌하고 아름다운 타이포그래피배열 ·사진과 일러스트레이션의 전문화 ·개성있고 통일성있는 레이아웃 각 사의 개성에 맞게 읽히는 사외보가 그 어느 때 보다도 필요하게 되었다. 경영자의 사외보에 대한 중요한 인식과 함께 자사만의 개성적인 기획과 창조적인 레이아웃이 필요하다. 또한 편집디자이너의 창의력이 무엇보다 필요하다. 갈수록 편집디자이너에게 가해지는 책임의 무게는 점점 늘고 있다. 사외보는 기업의 이미지 향상뿐만 아니라 국민들이 원하는 기사와 편집력으로 시대에 민감하게 대처하는 더 나아가 이 시 대를 이끌어나가는 편집디자인의 발전에 선도적인 역할을 하는 정보지로 자리매김 하여야 할 것이다.

• 한국산학기술학회논문지
• /
• 제19권5호
• /
• pp.611-617
• /
• 2018

대형구조물의 효과적인 구조 안전성 확보를 위해서는 결함탐지기술을 포함한 건전성 모니터링의 적용이 필요하다. 본 연구에서는 보 구조물에 발생하는 균열위치와 균열크기를 추정하기 위하여 다음과 같은 2단계의 균열추정방법을 제안한다. 우선, 보 구조물의 분포 국부 변형률 계측결과를 이용하여 변형률 모드형상을 구하고, 이에 대한 수정 라플라시안(Laplacian) 연산을 통하여 균열발생 영역을 추정한다. 이후, 가속도 측정을 통하여 구한 고유주파수와 신경망기법을 이용하여, 미리 추정된 균열발생 영역을 대상으로 균열위치와 균열크기를 추정한다. 이때, 신경망을 훈련시키기 위하여, 에너지법에 의해 유도된 균열보의 등가휨강성을 이용하여 균열보의 고유주파수를 해석적으로 구한다. 기법을 검증하기 위하여 알루미늄 캔틸레버 보에 대한 손상실험을 수행하였다. 인위적으로 실험체에 균열을 가한 후 자유진동실험을 수행하여 동적 변형률과 가속도를 계측하고 이를 이용하여 변형률 모드형상과 고유주파수를 구하였다. 변형률 모드형상에 대한 수정 라플라시안 연산을 통하여 균열발생 영역을 추정하고, 고유주파수와 신경망기법을 이용하여, 미리 추정된 균열발생 영역에 대하여 균열위치와 균열크기를 판정하였다. 3가지 손상경우에 대한 균열발생 영역의 추정결과는 실제 영역과 잘 일치하였으며, 균열위치와 균열크기 추정결과의 정확성을 상당히 향상시킬 수 있었다. 제안된 기법은 장대구조물에 대한 구조물 건전성 모니터링에 효과적으로 활용될 수 있을 것으로 판단된다.

• 한국지반공학회논문집
• /
• 제30권6호
• /
• pp.5-21
• /
• 2014

지진시 불포화 도로성토의 붕괴는 지하수 및 강우의 침투에 기인한 함수비의 증가가 그 원인이 됨이 지적되어 왔다. 따라서, 이와 같은 지반재해의 방지를 위한 합리적 보강방안 및 적절한 설계기준의 정립을 위해 불포화 도로성토의 동적안정성 및 변형모드에 대한 함수비의 영향을 연구할 필요가 있다. 본 연구에서는 불포화 도로성토의 변형 및 파괴거동에 대한 함수비의 영향을 연구하기 위해 상이한 함수비를 갖는 도로성토 모형에 대하여 동적 원심모형실험을 진행하였다. 본 실험에서는 도로성토 모형에 대한 동적하중 부가시의 변위, 간극수압 및 가속도의 계측을 통해 최적함수비 부근 및 최적함수비보다 높은 함수비를 갖는 불포화 도로성토에 대한 동적 거동을 고찰하였다. 이와 함께, 화상해석에 의한 변위 및 변형율 분포의 분석을 통하여 최적함수비보다 높은 함수비를 갖는 불포화 도로성토의 변형모드를 구명하였다. 이로부터 사면 천단부의 침하는 천단부 아래에서의 체적압축에 기인하며, 구속압력이 작은 사면 선단부 및 사면 표면부 부근에서는 체적팽창을 동반한 큰 전단변형이 발생함을 확인하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.243-244
• /
• 2013

Over the past 15 years, several groups have incorporated radio-frequency quadrupole (RFQ) based instruments before the accelerator in accelerator mass spectrometry (AMS) systems for ion-gas interactions at low kinetic energy (＜40 eV). Most AMS systems arebased on a tandem accelerator, which requires negative ions at injection. Typically, AMS sensitivity abundance ratios for radioactive-to-stable isotope are limited to Xr/Xs ＞10^-15, and the range of isotopes that can be analyzed is limited because of theneed to produce rather large negative ion beams and the presence of atomic isobaric interferences after stripping. The potential of using low-kinetic energy ion-gas interactions for isobar suppression before the accelerator has been demonstrated for several negative ion isobar systems with a prototype RFQ system incorporated into the AMS system at IsoTrace Laboratory, Canada (Ontario, Toronto). Requisite for any such RFQ system applied to very rare isotope analysis is large transmission of the analyte ion. This requires proper phase-space matching between the RFQ acceptance and the ion beam phase space (e.g. 35 keV, ${\varphi}3mm$, +-35 mrad), and the ability to control the average ion energy during interactions with the gas. A segmented RFQ instrument is currently being designed at Korea Institute for Science and Technology (한국과학기술연구원, KIST). It will consist of: a) an initial static voltage electrode deceleration region, to lower the ion energy from 35 keV down to ＜40 eV at injection into the first RFQ segment; b) the segmented quadrupole ion-gas interaction region; c) a static voltage electrode re-acceleration region for ion injection into a tandem accelerator. Design considerations and modeling will be discussed. This system should greatly lower the detection limits of the 6 MV AMS system currently being commissioned at KIST. As an example, current detection sensitivity of 41Ca/Ca is limited to the order of 10^-15 while the 41Ca/Ca abundance in modern samples is typically 41Ca/Ca~10^-14 - 10^-15. The major atomic isobaric interference in AMS is 41K. Proof-of-principal work at IsoTrace Lab. has demonstrated that a properly designed system can achieve a relative suppression of KF3-/41CaF3- ＞4 orders of magnitude while maintaining very high transmission of the 41CaF3- ion. This would lower the 41Ca detection limits of the KIST AMS system to at least 41Ca/Ca~10^-19. As Ca is found in bones and shells, this would potentially allow direct dating of valuable anthropological archives and archives relevant to our understanding of the most pronounced climate change events over the past million years that cannot be directly dated with the presently accessible isotopes.