• Journal of The Korean Society of Agricultural Engineers
• /
• v.58 no.6
• /
• pp.47-54
• /
• 2016

This study is a basic research on the functional performance review for the use of environmentally friendly construction materials as lapilli-bio block. The neutralization processed Mt. Backdusan and Mt. Hallasan lapilli-bio block were identified vegetation characteristics and water purification properties. As a result, the adsorption of root was more favorable, depending on the material properties of many voids Lapilli. And if the neutralization processed lapilli-bio blocks maintain a long-term immersion conditions in contaminated water was found to be expected from the improvement effect of SS, T-N and T-P. However, field trials and continuous studies are expected to be identified by the use of lapilli-bio block.

• Economic and Environmental Geology
• /
• v.55 no.3
• /
• pp.295-307
• /
• 2022

We studied the Cretaceous Jeonggaksan Formation to determine depositional processes of pyroclastic density currents entering into the lacustrine environments. This formation is composed largely of sandstone-mudstone couplets and (tuffaceous) normally graded sandstones deposited in lacustrine environments, interbedded with two pyroclastic beds: welded massive lapilli tuff and normally graded lapilli tuff. The welded massive lapilli tuff (10 m thick) is composed of poorly sorted, structureless lapilli supported by a welded ash matrix. The normally graded lapilli tuff (4 m thick) is characterized by moderately to well sorted natures and multiple normally graded divisions in the lower part of the bed with internal boundaries. The contrasting depositional features between these lapilli tuff are suggestive of different physical characteristics and depositional processes of pyroclastic density currents in the lake. Overall poorly sorted and massive natures of the thick, welded massive lapilli tuff are interpreted to have been formed by rapid settling of pyroclastic sediments from highly concentrated and sustained pyroclastic density currents. In this case, the pyroclastic density currents were able to displace lake water from shoreline and the pyrolclastic density currents preserved their own heat except for frontal parts of the currents. As a result, welded textures can be formed despite entrance of pyroclastic density currents into the lake. The internal boundaries of the normally graded lapilli tuff reflect unsteady natures of the pyroclastic density currents at the time of the deposition and the pyroclastic density currents can not provide sufficient pressure to displace lake water. As a consequence, the pyroclastic density currents transformed into water-saturated turbidity currents, forming relatively well sorted, normally graded lapilli tuff.

• The Journal of the Petrological Society of Korea
• /
• v.1 no.2
• /
• pp.91-103
• /
• 1992

Eruptive mechanisms and processes at Udo tuff cone can be inferred from indicative characters of products, bedforms and lithofacies, and ring faults. In terms of bedforms and lithofa-cies in particular, massive lapilli tuff beds and chaotic lapilli tuff beds are derived from subaerial falls of aggregated tephra of wet tephra finger jets, occurring dominantly at the lower sequences of proximal part at the tuff cone. Crudely stratified lapilli tuff are derived from subaerial falls of slightly aggregated tephra of less wet tephra finger jets, whereas reversely graded lapilli tuff beds are from slightly disaggregated subaerial falls of continuous uprush. Both beds frequently occur in the middle sequences at proximal and near medial part of the tuff cone. Block and lapilli tephra lenses, ash-coated lapilli tephra beds(lenses) and thin-bedded tuff beds are derived from extremely disaggregated subaerial falls of dry tephra in the continuous uprush, frequently occurring at the upper sequences of medial part at the tuff cone. Udo tuff cone is a basaltic volcano emergent through the sea water surface while water could flood across or into the vent area. Emergence of the tuff cone was from the type-Surtseyan eruption characterized by earlier tephra finger jets and later continuous uprush columns of tephra with copious volumes of steam. Explosions began when boiling of wter produced a bubble column reducing the hydrostatic pres-sure, allowing exsolution of gases from the magma. This expansion of magma into a vesiculating froth fragmented the magma and permitted mixing of magma and water so that a more vigorous generation of steam could proceed. Tephra finger jetting explosions continued to build the crater rims, then remove water from the vent that their deposits flowed like slsurries until the continuous uprush explosion ensued. Continuous uprush explosions were associated with most rapid accumula-tion of tephra. The increasing volume rate led to partial removal of water from the vent area by the newly tephra ring so that more vigorous activity could be attended by a reducing water supply. This might restrain surplus of cold water entering the vent and thus enhance the vigour of the eruption by allowing optimal heat exchange. Eventually the crater became so deep and unsuported that piecemeal sliding, or massive subsidence on indipping ring faults, filled and closed the vent, and the cycle of explosions and collapse began anew.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.57 no.1
• /
• pp.111-118
• /
• 2015

This research aims to utilize lapilli from the Mt. Baekdusan as environmently-friendly construction material. First of all, the neutralizing method for fabricating lapilli-cement-mixed bioblock was examined. And then, by use of the neuralized bioblock with microorganism for water purification, the growth inhibition effect against the pathogenic coliform bacillus was evaluated. The result regarding growth inhibition effect on pathogenic coliform bacillus indicates that the pretreatment condition, which is a concurrent procession with aqueous solution of 10% di-ammonium Phosphate after water curing, led to pH degraded below 10 which was the target value. Therefore it was concluded that the method was effective on bio-block neutralization. The microorganisms purifying water and di-ammonium phosphate were detected through the examination for microorganism existence on the bioblock, therefore it was concluded that the bioblock composed of lapilli and cement is able to be utilized in various structures as an environment friendly construction material.

• The Journal of the Petrological Society of Korea
• /
• v.22 no.1
• /
• pp.49-62
• /
• 2013

The Dongmakgol Tuff is divided into 8 lithofacies based on their grain size and depositional structures: massive tuff breccia(TBm), welded tuff and lapilli tuff(LTw), rheomorphic tuff and lapilli tuff(LTr), massive lapilli tuff(LTm), stratified lapilli tuff(LTs), gradedly bedded lapilli tuff(LTg), crudely bedded lapilli tuff(LTb) and massive fine tuff(Tm). They can be divided into 3 pyroclastic rock group based on their constituents of the lithofacies. The lower group(LI) is composed of LTm, LTw and LTr, which are interpreted to have resulted from emplacement of voluminous pyroclastic flows due to ignimbrite-form eruption to boiling-over eruption. The middle group(LT+MI) consists of LTs, LTg and LTm associated with Tm in the lower part, and of LTm, LTw and LTr in the middle and upper parts; these suggest that started with deposition of pyroclastic surges from phreatoplinian eruption by poor eternal water, passed through emplacement of pyroclastic flows from ignimbrite-form eruption and ended with deposition of voluminous pyroclastic flows from boiling-over eruption. The upper group(lUT+uUT+UI) is composed of LTs, LTg and Tm in the lowermost, TBm, LTb, LTb and Tm in the lower part, and LTm and LTw in the middle and upper part, suggesting that began with deposition of surges from phreatoplinian eruption, passed through deposition of pumice- and ash-fallouts from plinian eruption and transformed into emplacement of pyroclastic flows due to boiling-over eruption. As result, eruptive processes in the Dongmakgol Tuff approximately began with phreatoplinian or/and plinian eruption, transformed into ignimbrite-forming eruption and proceeded into boiling-over eruption in each volcanism, but proceeded presumably without phreatoplinian or plinian eruption in the earlier stage of 1st volcanism.

• Journal of the Korean earth science society
• /
• v.29 no.5
• /
• pp.386-395
• /
• 2008

The absolute age of lapilli tuff in sedimentary formation that contains dinosaur fossils in the Boseong area, Korea was determined radiometrically against volcanic rocks below and above the fossil-bearing horizons. The sanidine in the lapilli tuff below the fossil-bearing horizon (Seonso formation) has an $^{40}Ar-^{39}Ar$ age of $81.l{\pm}1.4Ma$. The Pilbong tuff above Seonso formation has an $^{40}Ar-^{39}Ar$ age of $81.0{\pm}2.4Ma$. An andesite dyke intruding all sedimentary units yields an $^{40}Ar-^{39}Ar$ age of $42.4{\pm}2.5Ma$. Thus 81 Ma age can be regarded as the best estimate for the age of the Seonso Formation and the associated the dinosaur eggs. This age correlates well with dinosaur fossil finds in the Haenam and Koseong regions of Korea. The occurrence of dinosaur eggs and clutches attests to the existence of dinosaurs in southern Korea at least inCampanian times.

• Ocean and Polar Research
• /
• v.23 no.2
• /
• pp.97-107
• /
• 2001

The Sejong Formation of Late Paleocene to Eocene is a lower volcaniclastic sequence unconformably overlain by upper volcanic sequence, and distributed along the southern and southeastern cliffs of the Barton Peninsula. The Sejong Formation is divided into five sedimentary facies; disorganized matrix-supported conglomerate (Facies A), disorganized clast-supported conglomerate (Facies B), stratified clast-supported conglomerate (Facies C), thin-bedded sandstone (Facies D), and lapilli tuff (Facies E), based on sedimentary textures, primary sedimentary structures and bed geometries. Individual sedimentary facies is characterized by distinct sedimentary process such as gravel-bearing mudflows or muddy debris flows (Facies A), cohesionless debris flows (Facies B),unconfined or poorly confined hyperconcentrated flood flows and sheet floods (Facies C), subordinate streamflows (Facies D), and pyroclastic flows (Facies E). Deposition of the Sejong Formation was closely related to volcanic activity which occurred around the sedimentary basin. Four different phases of sediment filling were identified from constituting sedimentary facies. Thick conglomerate and sandstone were deposited during inter-eruptive phases (stages 1, 3 and 4), whereas lapilli tuff was formed by pyroclastic flows during active volcanism (stage 2). These records indicate that active volcanism occurred around the Barton Peninsula during Late Paleocene to Eocene.

• Economic and Environmental Geology
• /
• v.18 no.4
• /
• pp.357-368
• /
• 1985

The Weolseong diatreme crops out about 28km south of Kyeongju City, Korea. The diatreme is a circular shaped volcanic vent, 1.2km in diameter, that formed subaerially, probably by phreatomagmatic (phreatoplinian) eruptions of Tertiary age. The rocks occupying the display well developed layering produced by base surge and proximal ba11istic fall. Accretionary lapilli are a common component. The rocks comprise tuff breccia and fine-grained rock derived from the vent walls. This sequence has undergone subsidence of at least over 650m. Most explanations for the presence of bedded tuffs at considerable depths within a volcanic pipe involve subsidence. Comparable amount of subsidence are recorded in many diatremes in other parts of the world. The ore body is distinctly circular and funnel shaped in center of diatreme. The vent area of diatreme served as channel ways for the mineralized hydrothermal fluids.

• Journal of Conservation Science
• /
• v.37 no.4
• /
• pp.380-390
• /
• 2021

The purpose of this study is to scientifically analyze the rocks of the Obongsan Mountain in Boseong, Jeollanam-do, which contains the largest extant quarry of Gudlejang (flat stone for heating) in Korea, and to scientifically determine the petrological characteristics of the area and the reasons for its use as a quarry. The rocks in the quarry are composed of light-green lapilli tuff, containing various types of lithic fragments and crystalline fragments in a vitreous matrix consisting of the fine feldspar crystals. The main constituent minerals were identified as quartz, plagioclase, mica, chlorite and opaque minerals. When the major element compositions were plotted on a Na₂O+K₂O versus SiO₂ diagram, all samples were situated in the same compositional area as rhyolite. In addition, the result of magnetic susceptibility measurement also showed a similar range of values, of 1.30 ~ 4.85 (×10^-3 SI), indicating that samples were fractionated from the same magma. Both rock types showed similar apparent specific gravity values of 2.32 ~ 2.60. In particular, plate-shaped joints are well developed in the Obongsan Mountain area, and many areas exhibit talus terrain. In conclusion, the rocks of this area is interpreted to used for a site of Gudlejang quarrying, because the rocks were easily obtainable due to the terrain characteristics, and their petrological properties made them suitable for use as Gudlejang stone.

• The Journal of the Petrological Society of Korea
• /
• v.5 no.1
• /
• pp.108-120
• /
• 1996

This study reports petrography and geochemical characteristics of the Cretaceous volcanic rocks that are distributed in the vicinity of the Cheonsungsan area, Yangsan-Gun, Gyeongsangnam-Do. The Cretaceous volcanic rocks composed of andesitic rocks, Wonhyosan tuff, Cheonsungsan tuff in ascending order. Sedimentary rock is the basement in the study area cofered with volcanic rocks. These volcanic rocks are Wonhyosan tuff and Cheonsungsan tuff that represented the early phase of the Bulgugsa igneous activity. Wonhyosan tuff are classified into dacite tuff and dacite welded tuff based on the rock texture and their mineral composition. They are covered with Cheonsungsan tuff. Dacite tuff composed of lithic lapilli ash-flow tuff and vitric ash-flow tuff. Most dacite welded tuff are lapilli ash-flow tuff. Cheonsungsan tuff overlying the Wonhyosan tuff consists of rhyolite tuff and rhyolite welded tuff. Rhyolite tuff are lithic crystal ash-flow tuff and crystal vitric ash-flow tuff with somewhat accidental fragments of andesitic and sedimentary rocks. Rhyolite welded tuff is distinguishe from rhyolite tuff by is typical eelded fabrics and its rock color. According to petrochemical data, the volcanic rocks in study area belong to high-K orogenic suties. On the discriminant diagrams such as La/Yb versus Th/Yb, these rocks falls into the discriminant fields for the normal continental margin arc.