• International Journal of Highway Engineering
• /
• v.19 no.2
• /
• pp.153-165
• /
• 2017

PURPOSES : With the increasing number of older drivers in an aging society, there is a growing need for research and planning on traffic safety for the older drivers using an improved road geometry design. This study also proposed a modified urban road interchange design, which aims to keep the older drivers away from accident-prone and high-traffic areas of the city. METHODS : In this study, we examined accident data records of older drivers to identify accident-prone zones and intersections; we studied the road geometry at these zones and analyzed if it was an underlying cause for higher number of accidents. Based on the research and subsequent analysis, we suggested plans for improvement of road geometry design at these intersections. RESULTS :By studying historic data and analyzing factors that affect the likelihood of accidents of vehicles driven by older drivers and after studying suitable traffic accident prediction models, we identified the major variables that need to be modified at accident-prone intersections, such as the width of a left turn lane at an intersection and the radius of the right turn lane at a street corner. The results have a significance probability of less than 0.001 and a 95% confidence level. To improve safety at the identified intersection, this study suggests the installation of a left-turn-lane-shaped Positive Offset and a right-turn-lane-shaped Slip Lane concept and an adjustment of intervals between intersections.

• Geomechanics and Engineering
• /
• v.27 no.6
• /
• pp.537-550
• /
• 2021

There are various technical problems need to be solved in the construction process of pre-setting an isolation wall into a double lane in the outburst prone mine. This study presents a methodology that pre-setting an isolation wall into a double lane without a coal pillar. This requires the excavation of two small section roadways to dig a wide section roadway, followed by construction of the separation wall. During this process the connecting lane is reserved. In order to ensure the stability of the separation wall, the required bearing capacity of the isolation wall is 4.66 MN/m and the deformation of the isolation wall is approximately 25 cm. To reduce the difficulty of implementing support the roadway is driven by 5 m/d. After the construction of the separation wall, the left side coal wall is brushed 1.5 m to make the width of the gas roadway reach 2.5 m and the roadway support utilizes anchor rod, ladder beam, anchor cable beam and net configuration. During construction, the concrete pump and removable self-propelled hydraulic wall mold are used to pump and pour the concrete of the isolation wall. In the process of mining, the stress distribution of coal body and isolation wall is detected and measured on site. The results demonstrate that the deformation of the surrounding rock of roadway and separation of roof in the roadway is small. The stress of the bolt and anchor cable is within equipment tolerance validating their selection. The roadway is well supported and the intended goal is achieved. The methodology can be used for reference for similar mine gas control.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.34 no.2 s.115
• /
• pp.26-35
• /
• 2006

The purpose of this research is to suggest the planting methods and the reasonable target levels of IGS for promoting green streetscape in Seoul. Using the three dimensional computer simulations, various greening methods were applied to evaluate effectiveness of promoting green streetscape. The results of this study suggest that promoting tree planting on car lane is more effective than on pedestrian side walks. In wide streets, the height of tree has positive effects on promoting green streetscape. In both car lane and pedestrian side walks, the greening effects of tree planting both in zig-zag pattern and in parallel pattern were similarly most high. The width of strip in side strip planting has positive effect on promoting green streetscape. Promoting stratified planting is very effective. Promoting greening wall on pedestrian side walks is more effective than on car lane. Combined the results of IGS survey with the public officials and complex simulations, suggest that the optimal levels of IGS is ranging from 12.0% in alleys to 54.0% in car lanes among arterial roads.

• Journal of the Korean Society of Safety
• /
• v.33 no.1
• /
• pp.135-141
• /
• 2018

Rotary that causes traffic delays and safety issues by high-speed entry vehicles is currently being improved to roundabout. The operational difference between rotary and roundabout can cause driver's confusion and traffic accident. The purpose of this study is to develop the accident rate models which explain the factors related to the accidents by land use and intersection type. The main results are as follows. First, the null hypotheses that the type of land use and two intersections do not affect the accident rate are rejected. Second, the conflicting factors such as the number of crosswalk and bicycle lane should be carefully considered to reduce traffic accident at rotary. In the case of roundabout, greater than 3.5 m in circulatory lane width and two circulatory lane are analyzed to be important to prevent the accidents. Finally, the commercial and mixed areas are evaluated to be weak to traffic accidents than residential area.

• Journal of the Korean Society of Safety
• /
• v.30 no.2
• /
• pp.70-76
• /
• 2015

This study deals with the traffic accident of circular intersections. The purpose of the study is to develop the accident models by traffic violation type. In pursuing the above, this study gives particular attention to analyzing various factors that influence traffic accident and developing such the optimal models as Poisson and Negative binomial regression models. The main results are the followings. First, 4 negative binomial models which were statistically significant were developed. This was because the over-dispersion coefficients had a value greater than 1.96. Second, the common variables in these models were not adopted. The specific variables by model were analyzed to be traffic volume, conflicting ratio, number of circulatory lane, width of circulatory lane, number of traffic island by access road, number of reduction facility, feature of central island and crosswalk.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.303-304
• /
• 2006

This paper proposes detection method of vehicles using camera for auto-vehicle-system. Detection method is based on shadow detection and symmetric feature of vehicle. This method consists of three part. First is lane detection. By lane detection, we can reduce the area for vehicle detection. Second part is shadow detection. Shadow has information of vehicle width and position. Third part is symmetry. This feature is helpful for confirming the vehicle.

• Journal of the Korean Society of Safety
• /
• v.32 no.6
• /
• pp.143-149
• /
• 2017

According to traffic accidents statistics, the number of fatalities, injuries and the rate of increase of traffic accidents have been decreasing over last 5-years. The fatality rate is 1.9 for total accidents but the fatality rate for single vehicle accidents shows a 7.9, which is 4 times greater than the average for all accidents. Single vehicle accidents, usually occur as a vehicle impacts a fixed objects on the roadside as the vehicle runs-off from the road. However, few researches have been conducted considering the accident severity of single vehicle accidents which impact to the fixed objects on the road. The single vehicle accident is directly related to the composition of road cross section, (since it is the required the minimum width of a road for all run-off-the-road vehicles to recover or come to a safe stop). Therefore, this study analyzes the influence of road cross section on traffic accidents to find out the severity of single vehicle accident. To analyze the road elements which are related to the accident severity, the Ordered Probit Model was used. As variables, the element of road cross section such as the radius(m), vertical curve(%), cross sectional grade(%), road width(m). number of climbing lane, median, and curb, were used (as was the 3-years of accidents data). This study found out that cross slope(%), road width(m), and the number of climbing lane are related to the severity of accident. The result of this study could be expected to improve the road safety and to be used as the base data for further road safety research.

• Journal of Korean Society of Transportation
• /
• v.10 no.2
• /
• pp.5-24
• /
• 1992

This research presets the method of determining basic capacity of signalized intersection using the concept of ideal saturation flow rate. Vehicle discharge rates during green time were collected and studied as part of the preparation of Korean Highway Capacity Manual. From the result of this study the ideal saturation flow rate and saturation queue position were determined. In addition, based on the ideal saturation flow rate two geometric adjustment factors(lane width and grade adjustment factors) were studied. The results were presented in this paper.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.4
• /
• pp.45-51
• /
• 2009

The paper presents the economic analysis of optimized-rehabilitation area method considered as one of the preventive maintenance methods in asphalt concrete pavement. The optimized-rehabilitation area was selected based on the analysis of traffic lane characteristics. The main concept of the selected method was to minimize the maintenance cost. The effective width of traffic lane in this method was 70 cm of each wheel path. According to the traffic survey conducted in this research, more than 95% of vehicles passed within the width of each wheel path. The new preventive optimized-rehabilitation area method showed less maintenance cost than the conventional overlay. In addition, traffic congestions and the user cost can be reduced. The research results revealed that the total maintenance cost was reduced by 35% by using the new method compare to the conventional one.

• Journal of Korean Society of Transportation
• /
• v.30 no.5
• /
• pp.3-10
• /
• 2012

This study dealt with traffic accidents occurring within roundabouts. The objective was to develop roundabout accident models for different driving types by using simultaneous equations. In pursuing the above, this study used a statistical program SPSS 17.0 to accommodate data from 148 accidents occurred within 39 roundabouts of Korea. In addition, the 2SLS(2 stage least square) estimation method was adopted to calibrate the models. The main results are as follows. First, both the number of accidents and the EPDO were evaluated to have bilateral relationships. Second, all 6 different simultaneous equation models according to driving types were found to be statistically significant. Third, the developed models were compared to each other with respect to either common or specific variables. Finally, variables such as ADT, conflicting rate, heavy vehicle ratio, circulatory roadway width, number of circulatory roadway lane, approach lane width, average approach lanes, parking places, and bus stops were selected as independent variables for the models.