• 제목/요약/키워드: landing speed

검색결과 128건 처리시간 0.029초

스마트무인기 로터 피치각 리깅, 트랙킹 및 밸런싱 (Pitch Angle Rigging, Tracking and Balancing of Smart UAV Rotor System)

  • 이명규;김유신;최성욱
    • 항공우주시스템공학회지
    • /
    • 제3권3호
    • /
    • pp.17-23
    • /
    • 2009
  • KARI SUAV (Smart Unmanned Aerial Vehicle) program is currently on the phase of ground and flight test. SUAV is a tilt rotor aircraft having the capability of vertical take-off/landing and high speed forward flight. The SUAV rotor system is 3-bladed, gimbaled hub type, which is not common for conventional helicopter configuration. In this paper, detailed procedure and method of rotor pitch rigging, tracking and balancing were described based on the experience of SUAV ground test.

  • PDF

LSB를 이용한 Docking System 개발 (Development of docking system using laste slit beam)

  • 김선호;박경택;최성락;변성태;이영석
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 1999년도 추계학술대회논문집
    • /
    • pp.309-314
    • /
    • 1999
  • The major movement block of the containers is range between apron and designation points on yard in container terminal. The yard tractor operated by human takes charge of it's movement in conventional container terminal. In unmanned container terminal, UCT(unmanned container transporter) has charge of the yard tractor's role and the navigation path is ordered from upper level control system. The unmanned container terminal facilities must have docking system that guided landing line to have high speed travelling and precision positioning in unmanned container terminal. The general method for docking uses the vision system with CCD camera, infra red, and laser. This paper describes the investigation for the developed docking method in view point of merit and demerit and introduces 속 result of developing the docking system with LSB(laser slit beam).

  • PDF

차량 엔진용 전자기식 밸브의 모델링 및 제어기 설계 (Modelling and Controller Design of Electro-Magnetic Valve for Vehicle Engine)

  • 정영석
    • 동력기계공학회지
    • /
    • 제6권4호
    • /
    • pp.81-87
    • /
    • 2002
  • The modelling and controller design of the EMV(electro-magnetic valve) for vehicle engine are considered in this paper. For the analysis and controller design, the governing equation of the EMV system is derived. For a good performance of the system, the start control, the holding control and the swing control are included in the controller design of the EMV system. In order to reduce landing speed of the valve, the on-time delay control which mainly come from the optimal control theory is employed. In order to reduce the power consumption of the system, the pick-up and hold operation has been used for the magnetic coil. The simulation and experimental results are presented to show the validity of the control method.

  • PDF

극저부상 HDI 개발을 위한 Head-Disk Impact 연구 (Investigation of Head-Disk Impact for Development of Ultra-Low Flying HDI)

  • 조언정;박노열
    • 한국윤활학회:학술대회논문집
    • /
    • 한국윤활학회 2001년도 제33회 춘계학술대회 개최
    • /
    • pp.122-126
    • /
    • 2001
  • Magnetic hard disk drive is continually being pushed to reduce head-disk spacing for higher recording densities. The current minimum spacing between the air-bearing slider and disk has been reduced to under 15 nm. In this work, it was investigated if flying height could be lowered under the height of laser bumps. With the reduction of the spinning speed, the flying height was decreased under the height of laser bumps. When a head swept between landing zone and data zone, the head-disk impact was monitored using AE and friction signals. It is demonstrated that magnetic hard disk drive could be operated without tribological failures under the height of laser bumps.

  • PDF

운동 범위 제약을 가진 기계의 연착륙을 위한 위치-속도 모드전환 PID제어기 설계 (The Design of Position-Speed Mode Switching PID Controller for the Soft Landing of A Machine Having Travel Range Limitation)

  • 허태광;이우택
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2018년도 추계학술대회
    • /
    • pp.18-20
    • /
    • 2018
  • 본 논문에서는 위치-속도 모드전환 제어기를 제안하고 이 제어기를 활용한 운동범위 제약을 가진 기계의 연착륙 방법을 제시한다. EGR 밸브와 같은 기계제품들은 이동할 수 있는 범위를 가지며 범위 내에서 위치를 제어한다. 위치제어 중 양끝 위치로 이동시 기계는 빠른 속도로 충돌할 수 있다. 속도가 빠르면 빠를수록 충돌 시, 충격력이 커지며, 충격력으로 기구물은 빠르게 마모되고 수명을 단축시킬 수 있다. 따라서 양끝 위치 이동 시, 일시적으로 속도를 제어할 수 있는 제어기가 필요하다. 제안된 위치-속도 모드전환제어기는 Hanus Scheme을 사용하여 모드전환 시, 범프효과로 인한 부작용을 감소시켰으며, 모드전환 이후 모드 전환된 제어기의 지령을 빠르게 추종한다. 마지막으로, EGR 밸브 양끝 위치 학습알고리즘에 적용시켜 시험하였다.

  • PDF

스페이스X사의 팔컨 9 비행데이터 분석 (Analysis of Flight Data in SpaceX's Falcon 9)

  • 김현준;유철성
    • 한국항공우주학회지
    • /
    • 제49권12호
    • /
    • pp.997-1010
    • /
    • 2021
  • 본 연구는 스페이스 X사의 팔컨 9 발사체의 비행 데이터를 수집하였고 분석하였다. 모든 임무는 극궤도, SSO, ISS, LEO, GTO와 같은 궤도의 종류에 따라 분류하였다. 1단 발사체의 메인 엔진 종료, 역추진, 재진입, 착륙 연소의 특징적인 기동에서 속도, 고도, 동압, 가속도 등의 물리 변수의 변화를 조사하였다. 상세한 기동 분석으로부터 가이드라인을 제안하였고 이는 재사용 발사체 개발을 위한 설계 및 평가 기준으로 사용될 수 있다.

저고도 운용 고정익 항공기의 고장 시 추락지점 및 속도 분포 연구 (Research on The Crash Location and Speed Distribution of Low Altitude Fixed-Wing Aircraft)

  • 남홍수;박배선;이학태
    • 한국항공우주학회지
    • /
    • 제50권1호
    • /
    • pp.59-66
    • /
    • 2022
  • 도심의 교통체증 문제를 해결하기 위해 eVTOL(Electric Vertical Take-Off and Landing) 항공기를 이용한 도심항공교통(UAM) 개념이 등장하여, 많은 국내외 기간들의 연구가 진행되고 있다. 하지만 도심 위를 필연적으로 비행하게 되는 eVTOL 기체가 차세대 교통수단으로 자리 잡기 위해서는 안전성의 확립이 필수적이다. 추락 시 위험도는 항공 안전과 관련된 대표적인 요소이며, 위험도 분석을 위해서는 돌발 상황으로 인한 기체의 추락 및 충돌 지점 예측이 필요하다. 고정익 모드로 운항하는 비행체의 경우 자세 혹은 방향을 결정하는 데 조종면이 큰 역할을 차지한다. 따라서 본 연구에서는 eVTOL 기체의 추락 시 위험도를 분석하기 위해 추진 시스템이 고장 난 기체의 조종면 각도에 따른 추락 지점의 분포를 추정하는 방법을 제시한다. 여기서, 성능과 형상이 공개된 eVTOL 기체를 대상으로 분석한 데이터를 사용하였다. 또한, 초기 조건에 따른 추락 지점의 분포와 확률을 계산하여 추락할 확률이 높은 구간을 도출하였으며, 추락 순간의 속도를 계산하였다.

스탠스 폭에 따른 신체 좌우 이동의 교육단서 제공을 위한 운동역학적 분석 (Kinetic Analysis for Providing Education Cues on Left and Right Maneuvers of Body by Stance Width)

  • 이동진
    • 한국콘텐츠학회논문지
    • /
    • 제15권8호
    • /
    • pp.556-563
    • /
    • 2015
  • 본 연구의 목적은 스탠스 폭에 따른 신체의 좌우방향 이동에 대한 동작을 비교, 분석하는데 있다. 이를 위해 남자 대학생 7명(평균 신장 $174.9{\pm}4.8cm$, 평균 체중 $70.9{\pm}6.6kg$)이 실험에 참여하였다. 실험을 위해 고속카메라 9대와 지면반력기 2대가 이용되었으며, 두 가지의 스탠스 폭은 좁은 보폭(평균 42.9cm)과 넓은 보폭(평균 65cm)으로 제한하여 실시하였다. 실험을 통해 다음과 같은 결론을 얻었다. 첫째, 좁은 보폭이 양발이 착지 후 오른발이 이지하는 순간까지, 즉 추진 구간의 소요시간에서 유의하게 짧은 시간이 소요되었다. 둘째, 스플릿 스텝 후 오른발 이동 변위는 좁은 보폭이 유의하게 길게 나타났다. 셋째, 신체무게중심 속도는 오른 발 이지 시와 최대 속도에서 두 보폭 간에 유의한 차이가 나타나지 않았다. 넷째, 오른발 이지시 엉덩관절과 무릎관절의 각도는 좁은 보폭의 각도가 유의하게 더 크게 나타났다. 다섯째, 오른발 이지시 지면반력 값은 두 보폭 간에 유의한 차이가 나타나지 않았다.

비행거리와 적재량 변화에 따른 항공기 온실가스 배출량 및 연료소모량 산정 (Aircraft Emission and Fuel Burn Estimation Due to Changes of Payload and Range)

  • 주희진;황호연;박병운;임동욱
    • 한국항행학회논문지
    • /
    • 제19권4호
    • /
    • pp.278-287
    • /
    • 2015
  • 항공기 배기가스가 지구의 현재와 미래의 기후에 미치는 잠재적 영향력은 항공산업계가 당면하고 있는 매우 중요한 환경 이슈 중 하나이다. 온실가스 배출의 잠재적 악영향에 대한 우려가 증가함에 따라 항공기의 배기가스 배출을 줄이고 기후에 관한 항공기의 영향을 완화하는 수단 중 하나로 항공기 배기가스를 산정하고 예측하는 시스템 개발의 필요성이 제기되고 있다. 따라서 본 연구에서는 영국 Lissys사에서 개발한 Piano-X 소프트웨어를 사용하여 3가지 항공기 급에 대한 다양한 비행거리와 경로에 대해 유상하중의 변화에 따른 항공기 온실가스 배출량을 산정하였다. 다양한 항속거리와 고도에 따른 경제속도, 장거리 순항속도, 최대 운항거리 속도에 대해 연료소모량도 분석하였다.

The Effect of Gaze Angle on Muscle Activity and Kinematic Variables during Treadmill Walking

  • Kim, Bo-Suk;Jung, Jae-Hu;Chae, Woen-Sik
    • 한국운동역학회지
    • /
    • 제27권1호
    • /
    • pp.35-43
    • /
    • 2017
  • Objective: The purpose of this study was to determine how gaze angle affects muscle activity and kinematic variables during treadmill walking and to offer scientific information for effective and safe treadmill training environment. Method: Ten male subjects who have no musculoskeletal disorder were recruited. Eight pairs of surface electrodes were attached to the right side of the body to monitor the upper trapezius (UT), rectus abdominis (RA), erector spinae (ES), rectus femoris (RF), bicep femoris (BF), tibialis anterior (TA), medialis gastrocnemius (MG), and lateral gastrocnemius (LG). Two digital camcorders were used to obtain 3-D kinematics of the lower extremity. Each subject walked on a treadmill with a TV monitor at three different heights (eye level; EL, 20% above eye level; AE, 20% below eye level; BE) at speed of 5.0 km/h. For each trial being analyzed, five critical instants and four phases were identified from the video recording. For each dependent variable, one-way ANOVA with repeated measures was used to determine whether there were significant differences among three different conditions (p<.05). When a significant difference was found, post hoc analyses were performed using the contrast procedure. Results: This study found that average and peak IEMG values for EL were generally smaller than the corresponding values for AE and BE but the differences were not statically significant. There were also no significant changes in kinematic variables among three different gaze angles. Conclusion: Based on the results of this study, gaze angle does not affect muscle activity and kinematic variables during treadmill walking. However, it is interesting to note that walking with BE may increase the muscle activity of the trapezius and the lower extremity. Moreover, it may hinder proper dorsiflexion during landing phase. Thus, it seems to reasonable to suggest that inappropriate gaze angle should be avoided in treadmill walking. It is obvious that increased walking speed may cause a significant changes in biomechanical parameters used in this study. It is recommended that future studies be conducted which are similar to the present investigation but using different walking speed.