• Journal of the Korean Institute of Landscape Architecture
• /
• v.27 no.4
• /
• pp.137-142
• /
• 1999

The purpose of this study is to develope a CAD-based tool for rasterization of polygonal vector map in AutoCAD. To identity the layer property of polygonal entity with user-defined coordinates as topology, algorithm in processing entity data of selection set that intersected with scan line was used, and the layers were extracted sequentially by sorted intersecting points in data-list. In addition to the functions for querying and modifying topology, two options for mapping were set up to construct plan projection type and to change meshes' properties in existing DTM data. In case of plan projection type, user-defined cell size of 3DFACE mesh is available for more detailed edge, and topological draping on landform can be executed in case of referring DTM data as an AutoCAD's drawing. The concept of algorithm was simple and clear, but some unexpectable errors were found in detecting intersected coordinates that were AutoCAD's error, not the utility's. Also, the routines to check these errors were included in algorithmic processing. Developed utility named MESHMAP was written in entity data control functions of AutoLISP language and dialog control language(DCL) for the purpose of user-oriented interactive usage. MESHMAP was proved to be more effective in data handling and time comparing with GRIDMAP module in LANDCADD which has similar function.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.12 no.1
• /
• pp.119-129
• /
• 1994

Geo-spatial information system covers a wide range of applications and technologies and is of great potential interest to many users in government, industry and science. In many civil engineering problems it is necessary to model a landform in order to be able to removed or to be brought in to make the site ready for the proposed developed. The earthwork volume, could be calculated by the trapezoidal formula, Simpson's 1/3 and 3/8 rules. And slope is defined by a plane tangent to the surface as modelled by the digital terrain model at any given point and comprises two components namely, gradient, the maximum rate of change altitude, and aspect, the compass direction of this maximum rate of change. The thesis is the earthwork volume could be counted, readjustment height, slope and aspect analysis of various derived products can be obtained form geo-spatial informations.

• Journal of Climate Change Research
• /
• v.8 no.4
• /
• pp.401-414
• /
• 2017

Vegetation and landscape characteristics at the three highest summits of Republic of Korea, i.e. Seoraksan, Jirisan and Hallasan, are analyzed on the basis of species composition, physiognomy, vegetation distribution and structure of alpine plants, along with landform, geology, soil and habitat conditions. Dominant high mountain plants at three alpine and subalpine belts contain deciduous broadleaved shrub, Rhododendron mucronulatum var. ciliatum (31.6%), and evergreen coniferous small tree, Pinus pumila (26.3%) at Seoraksan, deciduous broadleaved tree, Betula ermanii (35.3%), evergreen coniferous tree, Picea jezoensis (23.5%) at Jirisan, and evergreen coniferous tree, Abies koreana (22.6%), deciduous broadleaved shrub, Rhododendron mucronulatum var. ciliatum, and Juniperus chinensis var. sargentii (19.4%) at Hallasan, respectively. Presence of diverse landscapes at the peak of Seoraksan, such as shrubland, grassland, dry land along with rocky areas, and open land may be the result of hostile local climate and geology. High proportion of grassland and wetland at the top of Jirisan may related to gneiss-based gentle topography and well developed soil deposits, which are beneficial to keep the moisture content high. Occurrence of grassland, shrubland, dry land, conifer vegetation, and rocky area at the summit of Hallasan may due to higher elevation, unique local climate, as well as volcanic origin geology and soil substrates. Presences of diverse boreal plant species with various physiognomy at alpine and subalpine belts, and wide range of landscapes, including rocky, grassland, shrubland, wetland, and conifer woodland, provide decisive clues to understand the natural history of Korea, and can be employed as an relevant environmental indicator of biodiversity and ecosystem stability.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.23 no.6
• /
• pp.15-28
• /
• 2020

Urbanization and industrialization have caused increasing damage to national lands, and ecological restoration has proceeded without any specific assessment of this damage. The purpose of this study is to select indices to assess damaged areas through literature review and panel discussions, and to derive the importance of damaged area assessment indices by analyzing them through the Analytic Hierarchy Process (AHP). This study has derived, via literature review, six types of damage and a total of 18 related assessment indices. A total of 51 responses were collected from surveys and given to experts, and an AHP analysis conducted. As a result of the analysis, "Landform change (0.268)" was of the highest importance, with associated damage types as follows: "Soil contamination (0.193)", "Vegetation damaged (0.149)", "Surface soil loss (0.143)", "Change in soil physiochemical property (0.125)", and "Vegetation decline (0.122)". The analysis determined that the item of the highest importance in the overall assessment of damage was "Slope occurred area (0.100)", and that "Conductivity (0.022)" was of the lowest importance. This study can be presented as a criterion in determining the type and degree of damage in setting priorities for future ecological restoration projects.

• Journal of Korea Water Resources Association
• /
• v.45 no.2
• /
• pp.127-136
• /
• 2012

River is able to change by various environmental factors. In order to conduct river restoration design, it is necessary to evaluate the stable channel through the analysis of past and present river channels. River evaluation requires various data, such as geometry, hydraulic and hydrology, but there is a lot of difficulty to understand topographical information of river change on time and space due to a lack of past data by domestic conditions. This study was analyzed abandoned channel formation, changes in the vertical-section and cross-section length of rivers, and micro-landform changes etc using an image analysis technique. Purpose of this research is to evaluates the stable channel through a river channel morphology change from past and present river channels image. Mangyoung river was conducted artificial river maintenance through straight channel consolidation form 1920 to 1930 year. In the result river maintenance, mangyoung river length was decreased by 15 km and abandoned channels of six points were made. Since then, weir was continuously increased to control bed slope and use water. Install of weir was to be the reason of changes on channel width, thalweg, vegetated bar, sand bar, water area. Present Mangyoung river show that water area was temporary increased in upper and middle reach because of weir installation. Total sand bar was only decreased in upper channel. The change of vegetated bar and sand bar was slight recently. In this result, Mangyoung river is inferred to reach stabilized channel although there is some difference to the lower reach.

• Journal of the Korean earth science society
• /
• v.27 no.1
• /
• pp.83-94
• /
• 2006

The objective of this paper is to extract and analyze the sediment environment change information in the Sachencheon, Gangneung, Korea that was seriously damaged as a result of typhoon Rusa aftermath early in September, 2002 using multi-temporal remote sensing data. For the extraction of change information, an unsupervised approach based on the automatic determination of thresholding values was applied. As the change detection results, turbidity changes right after typhoon Rusa, the decrease of wetlands, the increase of dry sand and channel width and changes of relative level in the stream due to seasonal variation were observed. Sedimentation in the cultivated areas and restoration works also affected the change near the Sacheoncheon. In addition to the change detection analysis, several environmental thematic maps including microtopographic map, distributions of estimated amount of flood deposits and flood hazard landform classification map were generated by using remote sensing and field survey data. In conclusion, multi-temporal remote sensing data can be effectively used for natural hazard analysis and damage information extraction and specific data processing techniques for high-resolution remote sensing data should also be developed.

• Journal of the Korean earth science society
• /
• v.35 no.7
• /
• pp.501-517
• /
• 2014

Based on a summary of the previous studies on columnar joints, this study presents research strategies and subjects to understand a formation of columnar joints, and its application in South Korea as follows; geometry of colonnade and entablature, formation mechanism and pattern change, surface morphology and internal structure, platy joint at the top and the bottom of columnar joints, crack patterns in drying starch-water slurries, using numerical models and computer graphics on joint formation, scale and geometry concerned with occurrence of volcanic rock, petrological and mineralogical study of the host rock. Additionally, more research is needed, such as deformation of column pattern during the hot state, secondary landform by alteration and weathering on the Earth's surface such as rock stream, tor and tafoni. This study will take an active role in research of columnar joint and the Cenozoic lava flow of South Korea. Results of this study will be useful to the activation of geotourism and geological field study.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.90-90
• /
• 2011

스텔스 기능성 섬유의 위장은 주간의 경우, 육안 및 망원경 관측에 의해 결정되며 주변자연환경 color matching과 패턴이 핵심 스텔스 요인으로 구성되고, 가시광선 영역 스텔스로 표현할 수 있으며, 군 위장 체계에 있어 기본이 되는 기술 분야로 모든 군 위장제품에 활용되는 필수적인 기술 분야이다. 따라서 가시영역의 위장은 다양한 색상의 위장포와 포의 펀칭 등에 의한 파형특성을 부여하고 주위환경과 특성 조화를 이룸으로써 대상을 위장한다. 주요인자는 색상별 색도, 색차이다. 야간 위장은 근적외선 관측 장비의 탐지에 의해 결정되며 주변자연환경 NIR 반사율과 위장제품의 NIR 반사율 저하/제어기술이 핵심 스텔스 요인으로 구성되고, 근적외선(NIR) 영역 스텔스로 표시할 수 있으며, NIR 스텔스는 대개의 경우 기본적으로 섬유제품이 NIR 영역에서 높은 반사율을 나타내므로 NIR 반사율 저하/제어기술이 핵심이라 할 수 있다. 따라서 근적외선 영역(600~1250nm)의 적외선 반사특성을 산림지역의 반사특성과 조화시켜 위장효과를 부여한다. 위장포에서는 적외선 흡수 색소를 사용하여 적절한 반사특성을 나타나게 해야 한다. 위장용섬유가 detector의 탐지에서 벗어나려면 현재 700~1250nm의 근적외선파장영역에서 주변환경과 유사한 반사율을 지녀야한다. 이에 본 연구에서는 "숲 연구소" 및 서울대학교 "지반공학연구실"의 자문을 받아서 우리나라에서 가장 많이 존재하는 자연환경시료를 선정하여, 선정된 시료의 근적외선영역에서의 반사율을 분석하였다. 자연시료는 산간, 해안, 평야지형으로 각각 구분하여 주변 자연지형에 따른 자연시료의 근적외선영역의 반사율값을 비교하였다. 북한산에서 산간지형의 시료를 채취하였고, 해안지형의 시료는 강화도 동막해수욕장 부근, 평야지형의 시료는 인천 강화도 평야지역에서 채취하여 분석하였다. 비교분석한 지형별 자연시료의 근적외선 반사율값의 데이터베이스구축을 통하여 기존의 위장복과의 비교 적용 및 차후 개선사항 등을 검토하고자 한다.

• The Korean Journal of Quaternary Research
• /
• v.25 no.1
• /
• pp.1-13
• /
• 2011

To reinterpret the meaning of fluvial terraces in the Quaternary researches, the concepts and geomorphic properties of fluvial terraces are reviewed. Fluvial terraces are the alluvial landform that was once river channel or floodplain by paleochannel flowed in elevated areas from the current river by active incision of rivers due to the climatic changes and/or uplifts. As fluvial terraces are the remnants of alluviums after incisions of rivers, the major factors influencing on the incisions are the falling of erosion base, increase of river discharge and distinct geomorphic phenomenon of river. While it is generally known that fluvial terraces deposits in the upper or middle reaches of large rivers were formed during glacial periods, the deposits may be formed at the various periods due to the diverse natural environments and geomorphic properties of specific rivers, because there have been numerous cases that the ages of fluvial terraces in the upper or middle reaches of large rivers in Korea and China can be correlated to the interglacial periods.

• Journal of Environmental Impact Assessment
• /
• v.20 no.3
• /
• pp.381-395
• /
• 2011

Present work aims to establish an integrated management system of environmental data base for nine typical wind holes or air holes in Korea. It basically deals with definition, geographical distribution, morphological pattern, physical characteristics and anthropogenic environments of wind hole to propose systematic preservation strategy of their periglacial landscape and flora, which are known to be sensitive to global warming. Wind hole, in which cool air blows out during the summer, but mild air comes out during the winter from a cave or hole, is frequently found on northwest- and north-facing slopes on the terminal point of steep talus, block field, and block stream, and can be categorized into three types, i.e., talus, cave and sink types. Environmental characteristics of nine wind holes are analyzed on the basis of their geology, landform, climate, soil, hydrology, vegetation, road, footpath, land-use, and management system, and relevant DB are prepared. Wind hole areas with unique landscape and ecological values need to be designated as a nature reserve, and zoning of core, buffer, and transitional zones are required for the multi-dimensional preservation of periglacial landscape and ecosystem. Phytogeographical values of glacial relict plants, including mountain cranberry(Vaccinium vitis-idaea) at its global southernmost limit at Bangnaeri wind hole, Hongchon County, Gangwon Province of Korea are discussed in detail as a floristic refugia in connection with climate change during the Pleistocene Epoch and potential in-situ and ex-situ preservation sites in the future.