• Applied Microscopy
• /
• 제30권1호
• /
• pp.101-111
• /
• 2000

기생충에서 세포 표면에 존재하는 당단백 말단 Glc-NAc(N-acetylglucosa-mine)와 NeuNAc (N-acetylneuraminic acid)가 숙주 면역계를 인식하고 영양물질 흡수와 막 투과성에 중요한 역할을 하는 것으로 알려졌다. 이들 당단백 말단 GlcNAc와 NeuNAc의 폐흡충 피낭유충과 유약성충, 성충의 충체 조직세포에 분포를 확인하기 위하여 WGA 황금입자 복합체를 반응시켰다. WGA 황금입자 복합체에 반응시킨 폐흡충 발육 단계별 조직을 전자현미경으로 관찰한 결과 폐흡충 피낭유충의 표피합포체에는 황금입자가 고밀도로 표지된 것이 관찰되어 폐흡충 피낭유충 표피세포질에 lectin수용체들이 고밀도로 분포하는 것으로 관찰되었다. 유약성충과 성충의 맹관 막구조물에 WGA 황금입자가 고밀도로 표지되어 맹관의 상피세포 막 구조물에 WGA 수용체들이 고밀도로 분포하는 것으로 확인되었다. 폐흡충 피낭유충과 유약성충 그리고 성충의 배설관 상피의 막구조물에 WGA 황금입자가 표지되어 배설관상피의 막구조물에 WGA 수용체가 분포하는 것으로 확인되었다. 따라서 피낭유충의 표피합포체와 표피세포의 세포질에 분포하는 WGA 수용체인 GlcNAc와 NeuNAc는 숙주의 면역계와 세포인식에 관여하며 유약성충과 성충은 표피세포의 GlcNAc와 NeuNAc는 소멸되고 맹관과 배설관 상피에 GlcNAc와 NeuNAc가 분포하여 영양물질 흡수와 막수송에 의한 재흡수작용이 활발한 것이 확인되었다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.295-298
• /
• 2003

High temperature deformation behavior of a Ti-Al intermetallic compound has been investigated. Specimens with a near gamma and a lamella structures were obtained by performing heat treatment at 1200 and 1330$^{\circ}C$, respectively, for 24 hr and stabilized at 900$^{\circ}C$ for 4 hr followed by air cooling. A series of load relaxation tests has been conducted on these samples at temperatures ranging from 850 to 950$^{\circ}C$ to construct flow curves in the strain rate range from 10$\^$-6//s to 10$\^$-3//s. Strain hardening was observed even at the temperature of 950$^{\circ}C$ in both the near gamma and the lamella structures. Further aging treatment for 12 hr at test temperatures has found to cause no softening in both microstructures.

• Current Research on Agriculture and Life Sciences
• /
• 제9권
• /
• pp.103-108
• /
• 1991

세포간층 lignin은 2차벽 lignin(end-wise-polymer)에 비해 축합도가 높으며 guaiacyl type의 phenol성 수산기등 말단기를 많이 갖는 2차벽 lignin보다 저분자량의 bulk polymer형 lignin이다.

• Animal Systematics, Evolution and Diversity
• /
• 제30권1호
• /
• pp.16-21
• /
• 2014

Four new species of the genus Hyattella (Dictyoceratida: Spongiidae); H. sinchangensis n. sp., H. mara n. sp., H. chuja n. sp. and H. lendenfeldi n. sp., were collected from Jeollanam-do and Jeju-do, Korea. Hyattella sinchangensis n. sp., H. mara n. sp., H. chuja n. sp. and H. grobosa Lendenfeld, 1889 are very similar to each other in some characters. However, Hyattella sinchangensis n. sp. characterized by no special dermal lamella and no tertiary fibres, and more thin secondary fibres than H. globosa. Hyattella mara n. sp. is differs in having well developed dermal lamella, slightly fasciculated primary fibres, and thick tertiary fibres. Hyattella chuja n. sp. differs in surface characters with a slightly elevated part, skeleton with abundant spongine, and very complex meshes. Hyattella lendenfeldi n. sp. is similar to H. tenella (Lendenfeld, 1889) in skeletal structure, thickness of primary and secondary fibres, but differs in growth form.

• Tribology and Lubricants
• /
• 제26권6호
• /
• pp.341-345
• /
• 2010

The NAUT(Non contact Air coupled Ultrasonic Testing) is one of the ultrasonic wave inspection methods. It compensates High power ultrasound Pulser Receiver, pre-amp, air probe of high sensitivity in air to generate loss energy by NAUT methods. Generally, in case of ultrasound inspection, it applies contact methods by using couplant. However it can inspect of UT without couplant by this NAUT. The ultrasound transmission reception is composed in stable condition in NAUT. It can inspect high low material or the specimen of rough part, the narrow spot, too. The spot welding is applying the inosculation of automobile component, car body, all boards. The CFRP is necessity of NDE because of the solidity changes material according to lamella tearing. Therefore it checked on realization whether and commercialization in the spot welding and CFRP inspection that the NAUT would be applied them.

• 한국결정학회지
• /
• 제3권2호
• /
• pp.120-128
• /
• 1992

BaTiO3 단결정을 용액의 서냉속도를 달리하면서 TSSG법으로 육성하였으며, 성장된 단결정의 결정외형, 결정 결함, 분역구조 등을 관찰하였다. 0.5℃/hr이 하의 속도로 서 냉함으로써 비교적 등차원적인 큰 단 결정을 육성할 수 있었으며, 성장된 BaTiO3 단결정 은 |111|면이 가장 잘 발달된 외형을 나타내었다. 용 액 냉각속도가 너무 빠르거나 용액내의 수직 온도구 배가 너무 크면 용액이 불안정해지므로, 침상의 Ba6 TiL7040 결정상이 석출된다. 성장된 결정내에 평행 한 쐐기모양의 lamella 분역 집단이 이와 수직하게 진행하는 lamella 분역 집단과 불규칙한 경계를 이루 고 있으며, 이들은 x-ray topography에서 현저한 회 절 명암 차이를 나타낸다. 단결정을 127℃ 이상으로 가열하면 입 방정으로 상전이 된다. 상전이 전단이 이 동할 때 정방정 영역에서는 연속적 분역 재배열이 이루어 지고 입방정 영역에서는 규칙적인 음력변형이 나타나며, BaTiO의 PTF정벽면은 |110|에 대해 약 9°기울어진 면으로 이루어진다.

• Applied Microscopy
• /
• 제30권3호
• /
• pp.311-319
• /
• 2000

대하 아가미의 형태와 미세구조를 광학현미경과 전자현미경으로 조사하였다. 대하는 수지형 아가미를 가진 다. 아가미는 출새관과 입새관을 구분하는 세로 격벽을 가진다. 각각의 새판은 전자밀도가 다른 다층구조의 큐터클로 싸여 있다. 새판 기저세포들은 편평형이며, 전자밀도가 높은 세포질을 가진다. 상피세포층은 단층으로 큰 핵을 가진 편평상피로 구성된다. 새판의 기둥구조는 세로방향의 미세소관들과 측면 membrane interdigitation을 가진다. AB-PAS음성 분비세포들은 다세포선의 형태이다. 활성화된 선에서 각 세포의 경계부는 뚜렷하지 않으며, 세포질에는 활면소포체, 미토콘드리아, 전자밀도가 낮으며 막을 가진 분비소포들과 granular rosettes를 가진다. 비 활성화된 선에서는 세포 경계가 뚜렷하며, 세포질에서는 전자밀도가 높은 다수의 작은 과립들이 산재한다. 그리고 alcian blue에 양성인 단세포 분비세포들은 세포질에 발달된 다수의 골지체와 조면소포체들을 함유한다.

• Macromolecular Research
• /
• 제12권2호
• /
• pp.172-177
• /
• 2004

We have studied the lamella-level morphology of poly(ethylene terephthalate) (PET)/polycarbonate (PC) blends using small-angle X-ray scattering (SAXS). Measurements were made as a function of the holding time in the melt. We determined the morphological parameters at the lamellar level by correlation function analysis of the SAXS data. An increased amorphous layer thickness was identified in the blend, indicating that some PC was incorporated into the interlamellar regions of PET during crystallization. The blend also exhibits a larger lamella crystalline thickness (l$\sub$c/) than that of pure PET. A possible reason for the increase in l$\sub$c/ is that the inclusion of the PC molecules in the interlamellar regions causes an increase in the surface free energy of folding. At the early stage of isothermal crystallization, we observed a rapid drop in the value of l$\sub$c/ in the blend; this finding indicates that a relatively large fraction of secondary crystals form during the primary crystallization. In contrast, the value of l$\sub$c/ for the sample that underwent a prolonged holding time increased with time in the secondary crystallization-dominant regime; this observation suggests that the disruption of chain periodicity, which results from transesterification between the two polymers, favors the development of fringed micellar crystals that have larger values of l$\sub$c/ rather than the development of normal chain-folded crystals.

• Structural Engineering and Mechanics
• /
• 제56권4호
• /
• pp.667-694
• /
• 2015

The suspended dome system is a new structural form that has become popular in the construction of long-span roof structures. Suspended dome is a kind of new pre-stressed space grid structure that has complex mechanical characteristics. In this paper, an optimum topology design algorithm is performed using the enhanced colliding bodies optimization (ECBO) method. The length of the strut, the cable initial strain, the cross-sectional area of the cables and the cross-sectional size of steel elements are adopted as design variables and the minimum volume of each dome is taken as the objective function. The topology optimization on lamella dome is performed by considering the type of the joint connections to determine the optimum number of rings, the optimum number of joints in each ring, the optimum height of crown and tubular sections of these domes. A simple procedure is provided to determine the configuration of the dome. This procedure includes calculating the joint coordinates and steel elements and cables constructions. The design constraints are implemented according to the provision of LRFD-AISC (Load and Resistance Factor Design-American Institute of Steel Constitution). This paper explores the efficiency of lamella dome with pin-joint and rigid-joint connections and compares them to investigate the performance of these domes under wind (according to the ASCE 7-05), dead and snow loading conditions. Then, a suspended dome with pin-joint single-layer reticulated shell and a suspended dome with rigid-joint single-layer reticulated shell are discussed. Optimization is performed via ECBO algorithm to demonstrate the effectiveness and robustness of the ECBO in creating optimal design for suspended domes.

• 보존과학회지
• /
• 제2권2호
• /
• pp.15-24
• /
• 1993

To understand the morphological change of ancient woods, samples classified by cell type, burial environment and species were collected and observed using microscopy. Decay of wood by cell type could classified into two types. First, degraded secondary wall was formed granular residues in $S_2$ layer and was remained $S_3$ layer and compound middle lamella. Second, the cell wall was slightly degraded and cracked in secondary wall. A gradual thinning of cell wall was occured. The compound middle lamella was separated from secondary wall. The resistance of degradation is increased at vessels, parenchyma, and tracheid and wood fiber in the order named. The type of degradation by species could be classified into four types. Overall degradation type; the degradation of cell wall is usually heavy and the extent of degradation Varies by part of the same sample. Partial degradation type ; this type shows severely different decay type by part of the sample. Nondegraded cells were mixed with degraded cells on the same sample. Erose degradation type ; thinning of the cell wall was occoured and the degradation type was different by part. Slight degradation types ; secondary wall was slightly degraded, cracked and separated from compound middle lamella. Considering different type of burial environment, dry wood was similiar to sound wood and slightly decayed. Waterlogged and peat burial wood was heavilydecayed. Between species of under the same environment, decay type and extent were diferentiated from each other.