• 한국해양공학회지
• /
• 제28권2호
• /
• pp.147-151
• /
• 2014

This research presents a method for the initial structural design of a multi-megawatt wind turbine blade. The structural data for a 2-MW blade were applied as the blade structural characteristic data of the reference blade. Tenkinds of blade models were newly designed by replacing the spar cap axial GRRP with a GFRP and CFRP These terms should be defined. at different orientations. The axial stiffness coefficients of the newly designed models were made equal to the coefficient of the reference blade. The required numbers of layers in each section of blades were calculated, and the lay-up designs were based on these numbers. Verification results showed that the design method that used the structural data of the reference blade was appropriate for the initial structural design of a wind turbine blade.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1116-1118
• /
• 2005

We studied laser crystallization of amorphous silicon films prepared at ultra low temperatures ($<150^{\circ}C$). Amorphous silicon films having a low content of hydrogen were deposited by using catalytic chemical vapor deposition method. Influence of process parameters on the hydrogen content was investigated. Laser crystallization was performed dispensing with the preliminary dehydrogenation process. Crystallization took place at a laser energy density value as low as $70\;mJ/cm^2$, and the grain size increased with increasing the laser energy. The ELA crystallization of Catalytic CVD a-Si film is a promising candidate for Poly-Si TFT in active-matrix flexible display on plastic substrates.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1266-1268
• /
• 2005

The influence of the grooved dielectric layer on discharge and luminous characteristics has been investigated for various depths of the groove to achieve a high luminance efficiency AC-PDP operated at a lower voltage. We use the voltagethreshold curve technique and address delay jitters to explain the discharge characteristics. It shows that the surface discharge voltage rely on the depth of the grooved dielectric layer. Vertical discharge voltage remains almost the same as the groove depth increases. The influence of the grooved dielectric layer on discharge and luminous characteristics has been investigated for various depths of the groove to achieve a high luminance efficiency AC-PDP operated at a lower voltage. We use the voltagethreshold curve technique and address delay jitters to explain the discharge characteristics. It shows that the surface discharge voltage rely on the depth of the grooved dielectric layer. Vertical discharge voltage remains almost the same as the groove depth increases.

• Asian-Australasian Journal of Animal Sciences
• /
• 제21권3호
• /
• pp.309-313
• /
• 2008

The insulin-like growth factor binding protein 3 (IGFBP3) has been investigated as a candidate gene for growth promoting effects in beef cattle and a modulator of IGF bioactivity. Previously, we have reported twenty two sequence variants discovered in Korean native cattle (Hanwoo). In this study, we examined the association between gene-specific polymorphisms of IGFBP3 and cold carcass weight (CW) and marbling score (MS) among Korean native cattle. Among twenty two polymorphisms, four common polymorphic sites (-854G>C, -100G>A, +421G>T and +3863C>A) were genotyped in our beef cattle (n = 437). Statistical analysis revealed that one common polymorphism in the promoter region (-854G>C) showed putative associations with MS (p = 0.03). IGFBP3 variation/haplotype information analyzed in this study will provide valuable information into strategies for the production of a commercial line of beef cattle.

• 한국철도학회논문집
• /
• 제14권3호
• /
• pp.276-284
• /
• 2011

본 연구는 철도 네트워크에서의 통행배정 모형에 관한 것이다. 기존의 통행배정모형은 주로 도로 혹은 도시 대중교통 네트워크에 초점을 둔 연구로서, 최적전략 기반 통행배정 모형을 비롯한 대부분의 통행배정 모형 이 지역간 철도 네트워크에 대해서는 비현실적인 수요를 생성한다고 알려져 있다. 특히 KTX개통 이후, KTX가 포함된 환승경로를 이용하는 승객이 점차 증가하는 추세이며, 이러한 KTX가 포함된 환승 경로 및 스케줄이 지속적으로 개선되고 있다. 본 연구는 환승을 고려한 새로운 다항로짓 기반 통행배정 모형을 제시한다. 특히 본 연구에서 제시하는 모형은, 통행 시간, 경로의 최소 운행횟수, 환승 저항 등 다양한 변수가 포함된 효용함수가 주어져 있을 때, K개의 최대 효용을 갖는 경로를 탐색하는 알고리즘을 포함하고 있다.

• 한국전자파학회논문지
• /
• 제24권6호
• /
• pp.654-660
• /
• 2013

본 논문에서는 벽 뒤의 표적을 탐지하기 위한 영상화 기법을 연구한다. 벽에 의한 강한 반사 신호와 벽 뒤의 난반사 신호로부터 정확한 표적 정보를 획득하기 위해 잡음 신호를 이용하는 바이스태틱 벽 투과 영상 레이더의 연구 가능성을 제안하고, 획득 신호를 영상화하는 기법을 설명한다. 제안하는 연구의 도출 과정을 제시하며 실험 결과를 분석함으로써 제안하는 연구의 가능성을 검증한다.

• 한국지형공간정보학회:학술대회논문집
• /
• 한국지형공간정보학회 2002년도 춘계학술대회 논문집
• /
• pp.119-129
• /
• 2002

The information system fields of spatial applications have rapidly grown during the last decade in Korea. Spatial data has been produced for a variety of systems without common standards until national GIS Committee defined the data exchange formats among spatial databases in the middle of 1990's. It aimed at promoting data sharing between the different systems in similar application fields. However, a considerable number of databases built prior to the introduction of the standards are not yet standard compliant but still play the roles of the main producers/consumers in the data collection field such as early developed huge AM/FM systems maintained by governmental organizations. The strong autonomy of these databases keeps their own data models, formats and descriptions from being standardized, which leads the sharing to a more difficult stage. Sharing is another way of data acquisition with least efforts and time away from direct collection. A data clearinghouse is the core module which directs users to the relevant data resources. The contents of datasets should be described with predefined metadata standards for precise indexing. Moreover, a number of technical problems have to be resolved for the common use of data between heterogeneous spatial database systems. However, the technical issues can be covered by the present information technologies. The difficulties persist in the political/institutional issues. Institutional issues are derived from the diverse sources such as political background, governmental policies, related laws and/or regulations. The paper will firstly make an analysis of current situation in terms of Korean policies, laws and regulations, secondly abstract the institutional issues from the situation analysis, lastly present guidelines for promoting spatial data sharing in Korea.

• Clinics in Shoulder and Elbow
• /
• 제20권1호
• /
• pp.46-48
• /
• 2017

There are many methods of making cement spacer in patients who require a two-staged operation for humeral head osteomyelitis. However, limitation of motion after the first surgery-due to inadequate size and insufficient intra-articular space for second surgery-remain to be an issue. To mitigate this issue, we made a cement spacer with the same size and shape of the patient humeral head. Four patients with humeral head osteomyelitis were enrolled in this study. To make the cement spacer, we used the Mimics program, and designed the molding box by a reverse engineering technique. We evaluated the range of motion and pain using a Constant score. The mean abduction was $50^{\circ}$($40^{\circ}-60^{\circ}$), forward flexion was $50^{\circ}$ ($30^{\circ}-70^{\circ}$), and average Constant score was 47.75 (44-52). Three-dimensional printed molding technique is one of the effective methods for humeral head osteomyelitis allowing for daily activities prior to the second surgery.

• 한국안전학회지
• /
• 제19권3호
• /
• pp.70-77
• /
• 2004

A Reasonable lighting should be provided for doing night work. All works far construction site can be exposed to potential hazard at night work The purpose of this study is to provide a standard of the lighting against accidents due to insufficient lighting at site. one pilot tea one at building work site, one at mad work site of it have been conducted for figuring out illumination change depending worker's activity direction, using lux checker to show it as numerical indication. The direction are changed with a range of 30, 60, 90, and 135 degree to be checked at site. Tests results show that $10\%\;and\;15\%$ of lighting could be decreased by changing the working direction of works at site. Therefore, steep slope place, cave work and backside of structural elements such as a column, deep beam should be considered for keeping sufficient and reasonable lighting. It is found that $50\%more$ illumination Lux needs f3r civil work than for building work.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.785-789
• /
• 2005

Low temperature deposition of silicon and silicon nitride films by catalytic CVD technique was studied for application to thin film transistors on plastic substrates for flexible AMOLEDs. The substrate temperature initially held at room temperature, and was controlled successfully below $150^{\circ}C$ during the entire deposition process. Amorphous silicon films having good adhesion, good surface morphology and sufficiently low content of atomic hydrogen were obtained and could be successfully crystallized using excimer laser without a prior dehydrogenation step. $SiN_x$ films showed a good refractive index, a high deposition rate, a moderate breakdown field and a dielectric constant. The Cat-CVD silicon and silicon nitride films can be good candidates for fabricating thin films transistors on plastic substrates to drive active-matrix organic light emitting display.