• 농약과학회지
• /
• 제14권1호
• /
• pp.30-36
• /
• 2010

EBDC계 살균제 중 국내에서 사용하고 있는 mancozeb와 metiram을 사용하여 실험실 조건에서 이들의 반감기 및 분해대사 산물인 ETU로의 전환특성을 조사하였다. EBDC계 살균제 및 분해대사 산물인 ETU에 대한 분석은 상온에 보관한 시료를 0, 1, 2, 5, 7, 9, 12, 15, 19, 22, 26일 경과 후에 HPLC~DAD로 분석하였다. EBDC계 살균제인 mancozeb, metiram과 그 분해산물인 ETU에 대한 정량회수율은 각각 86.9-90.2, 85-98.6 및 64.1-80.0% 범위를 나타내었다. Mancozeb와 metiram의 반감기는 각각 7.5일，27.8일이었다. Mancozeb 의 ETU 전환율은 4.7-67.2% 수준이었고，metiram의 ETU 전환율은 7.5-34.6% 수준이었다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제25권5호
• /
• pp.1-7
• /
• 2021

본 연구에서는 대형 시설물의 재난 모니터링을 위해 시설물에서 발생 가능한 붕괴 및 화재 사고를 감지하고, 재난 상황 발생 시 IoT 기반의 시설물 내부 상황 인지를 위한 커스터마이징 비콘을 개발하고자 하였다. 기존 변형률 센서를 이용한 데이터 계측의 경우 유선으로 변형률 센서를 연결하여 계측하였지만, 본 연구는 이를 무선으로 변경하여 실시간으로 구조물 변형의 유·무를 모니터링이 가능하도록 하였다. 이 과정에서 휘트스톤 브릿지를 이용하기 위해 커스터마이징 비콘에 연결이 가능한 변형률 센서 모듈을 제작하였으며, 계측 데이터를 원격으로 확인하기 위한 시스템 구성을 진행하였다. 계측 데이터 검증을 위해 차세대융합기술연구원 15층 내에 10개의 커스터마이징 비콘과 2개의 게이트웨이를 설치하였으며, 계측 데이터 분석 결과 변형률 데이터값이 7~8 사이에 분포하는 것을 확인하였다.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.464-469
• /
• 2003

The traditional and still most widely used, test methods for concrete structures are destructive method, such as coring, drilling or otherwise removing part of the structure to permit visual inspection of the interior. While these methods are highly reliable, they are also time consuming and expensive, and the defects they leave behind often become focal point for deterioration. In this study, tomography by theoretical inversion method in case of elastic wave using impact-echo method among concrete non-destruction test method was made. Taken model experiments are theoretical inversion method and time domain and frequency domain test on pier test model at laboratory level. Also experiment concerning frequency domain on 3 kinds of tunnel model with I-dimension form was carried out.

• Structural Engineering and Mechanics
• /
• 제49권6호
• /
• pp.745-762
• /
• 2014

As an important part, the connections generally are important for the overall behavior of the structure and the strength and serviceability of the connection should be ensured. This paper presents the mechanical properties of membrane connections in tensioned membrane structure. First, the details of common connections used in the membrane structure are introduced. Then, the common connections including membrane seam, membrane-flexible edge connection and membrane-rigid edge connection are tested and the corresponding failure mechanisms are discussed. Finally, the effects of connection parameters on the connection strength are investigated and proper connection parameters are proposed. The strength reduction factors corresponding to different connection types are proposed, which can be references for the design and analysis of membrane structures.

• 한국구조물진단유지관리공학회 논문집
• /
• 제23권2호
• /
• pp.44-50
• /
• 2019

잔교식 안벽의 수중부는 접근이 쉽지 않아서 손상확인이 어려운 곳인데, 최근들어 태풍과 지진이 빈번하게 발생하고 있어 잔교식 안벽 수중부 구조물의 손상 누적으로 인한 붕괴가 우려되는 상황이다. 잔교식 안벽의 붕괴를 방지하고 체계적으로 유지관리하기 위한 방안으로 FBG 센서를 이용한 적용 방법과 안전성 평가 방법을 연구하였다. 잔교식 안벽에 파일로 사용되는 원형 강관에 대한 FBG 센서의 적용 방안을 확인하기 위해 실내실험을 실시하고, 센서를 용접하여 부착하는 방법으로 적용해야 하는 것을 확인하였다. 잔교식 안벽에 대한 구조해석을 수행하여 FBG 센서를 부착하기 위한 최적의 부착위치를 확인하였다. 고정하중에 대한 응력을 구조해석을 하여 계산하고, FBG 센서를 통해 얻은 데이터를 이용하여 활하중에 대한 응력을 계산한 다음에 두 응력을 더해서 파일에 작용하고 있는 응력을 계산하였다. 계산한 응력을 허용응력과 비교하여 파일의 안전성 평가를 수행하였다. 본 연구는 잔교식 안벽의 안전성을 실시간으로 평가하는 방안을 찾기 위한 기초 연구로 수행되었다.

• Safety and Health at Work
• /
• 제14권4호
• /
• pp.347-357
• /
• 2023

Introduction: The COVID-19 pandemic turned biological hazards in the working environment into a global concern. This systematized review of published reviews aimed to provide a comprehensive overview of the specific jobs and categories of workers exposed to biological hazards with the related prevention. Methods: We extracted reviews published in English and French in PubMed, Embase, and Web of Science. Two authors, working independently, subsequently screened the potentially relevant titles and abstracts recovered (step 1) and then examined relevant full texts (step 2). Disagreements were resolved by consensus. We built tables summarizing populations of exposed workers, types of hazards, types of outcomes (types of health issues, means of prevention), and routes of transmission. Results: Of 1426 studies initially identified, 79 studies by authors from every continent were selected, mostly published after 2010 (n = 63, 79.7%). About half of the reviews dealt with infectious hazards alone (n = 38, 48.1%). The industrial sectors identified involved healthcare alone (n = 16), laboratories (n = 10), agriculture (including the animal, vegetable, and grain sectors, n = 32), waste (n = 10), in addition of 11 studies without specific sectors. The results also highlighted a range of hazards (infectious and noninfectious agents, endotoxins, bioaerosols, organic dust, and emerging agents). Conclusion: This systematized overview allowed to list the populations of workers exposed to biological hazards and underlined how prevention measures in the healthcare and laboratory sectors were usually well defined and controlled, although this was not the case in the agriculture and waste sectors. Further studies are necessary to quantify these risks and implement prevention measures that can be applied in every country.

• Geomechanics and Engineering
• /
• 제9권5호
• /
• pp.645-667
• /
• 2015

Single treatment and staged treatments in vertical wells are widely applied in sandstone and mudstone thin interbedded (SMTI) reservoir to stimulate the reservoir. The keys and difficulties of stimulating this category of formations are to avoid hydraulic fracture propagating through the interface between shale and sand as well as control the fracture height. In this paper, the cohesive zone method was utilized to build the 3-dimensional fracture dynamic propagation model in shale and sand interbedded formation based on the cohesive damage element. Staged treatments and single treatment were simulated by single fracture propagation model and double fractures propagation model respectively. Study on the changes of fracture vicinity stress field during propagation is to compare and analyze the parameters which influence the interfacial induced stresses between two different fracturing methods. As a result, we can prejudge how difficult it is that the fracture propagates along its height direction. The induced stress increases as the pumping rate increasing and it changes as a parabolic function of the fluid viscosity. The optimized pump rate is $4.8m^3/min$ and fluid viscosity is $0.1Pa{\cdot}s$ to avoid the over extending of hydraulic fracture in height direction. The simulation outcomes were applied in the field to optimize the treatment parameters and the staged treatments was suggested to get a better production than single treatment.

• 한국산업보건학회지
• /
• 제24권4호
• /
• pp.501-508
• /
• 2014

Objectives: This study identified the general characteristics of asbestos inspection/analysis laboratories in Korea and confirmed the actual situations in terms of technical aspects from these characteristics. In addition, given the background of the current problem, it offers preliminary data for determining future plans for improvement. Methods: A questionnaire was developed and distributed to the asbestos inspection/analysis laboratories that used the ISO/IEC 17025 for asbestos sampling and testing by UKAS(United Kingdom Accreditation Service) and the Korea Laboratory Accreditation Scheme(KOLAS). A total of 202 institutions in Korea were selected for the study and 145(71.8%) questionnaires were returned. Results: The number of personnel of the surveyed institutions averaged $4.2{\pm}2$ and 79.3% operated with less than five persons. In terms of education, the capital and other densely populated areas showed a high level of education(p<0.05). The level of education and facilities were determined by the magnitude of the institution(p<0.05). Institutions managed by highly educated directors were well-stocked with education and facilities(p<0.05). Institutions which had directors with considerable experiences received high scores overall and in particular higher scores in terms of education and facilities(p<0.05). At the level of the bottom five percent, the factor of education was 40.4% while the factor of measurement 49%, the factor of analysis 59%, the factor of facilities 61%, and the factor of survey 81%, respectively. Conclusions: To improve the quality of the institutions, in the short term, the problems identified in this study can be used to revise the related regulations. In the long term, a grading system of survey institutions needs to be established through the introduction of an accreditation system. However, the ongoing support of a government agency is required, including holding seminars and open education, suggesting guidelines for operation of asbestos inspection/analysis labs, and other means.

• 대한안전경영과학회지
• /
• 제10권3호
• /
• pp.167-181
• /
• 2008

There are lack of labour and increase in logistics costs due to rapid change in logistics environments and the demand for logistics. The reality is that over spending on logistics costs are getting worse due to lack of logistics standardization. An example will be excessive logistics costs caused by unsatisfactory use of logistics equipments in wholesale markets. The logistics efficiency is falling due to delays in using logistics equipments and standardization. Therefore, there needs standardization of logistics functions and unit of handling in each stage from packing, unloading, storage, transporting, logistics information and needs logistics standardization on equipments, machineries used for the above. Standard unified with standardization is called specification and if standardization is applied broadly in manufacturing or processing, inspection than each process in terms of production can be managed rationally and labour skills will improve and product quality will be evenly maintained and compatability of each part in terms of assembly will be maintained thus materials and labour could be saved thus results in increasing productivity and lowering production costs. Also, if it is applied in industry at state-level then there will be rationalization in consumption in circulation as in purchase of raw materials, sales of products, purchase of products by consumers and contribute in improving compatibility and fair transactions. This paper is aimed to help in first solving factors affecting the most in improving logistic efficiency among unit load system and logistic hollowization, standardizing logistics base, standardizing logistics information. The study conducted surveys on limited companies but hope that in the future the target companies can be divided further into types, industries and conduct more demonstrative analysis.

• 한국산업보건학회지
• /
• 제29권2호
• /
• pp.217-225
• /
• 2019

Objectives: The aim of this study is to evaluate the quality management systems of domestic asbestos survey and monitoring service providers and the relationships with the number of licenses or designations and sales performances. Methods: Data on quality management systems were collected by assessors who were assigned by the Korea Occupational Safety and Health Agency(KOSHA) during a pilot evaluation program for designated asbestos survey and monitoring service providers in 2016 using evaluation criteria developed by KOSHA. Basic characteristics, evaluated scores, and sales performance were gathered and statistically analyzed. Results: The median and arithmetic mean of the total scores were 0.64 and 0.66. Evaluation fields that scored highly with the highest percentages were sales performance, installation and availability of equipment, compliance with the mandatory minimum number of airborne samples, laboratory independence, and results of proficiency analytical testing, in that order. Evaluation fields that received low marks with the highest percentages were the training of personnel, blank field samples, calibration of flow rates, preliminary check and visual inspection of the work area prior to the clearance test, and review and approval of final reports, in that order. Comparison of normalized scores between service providers registered for asbestos and other tasks and those designated for only asbestos showed significant differences in their evaluated scores. Sales performance did not show a positive correlation with evaluated scores. Conclusions: The quality management systems of domestic asbestos survey and monitoring service providers were poor. High scores were recorded mostly in evaluation fields related to regulatory requirements. Low scores were recorded mostly in evaluation fields related to documentation and recordkeeping. Considering the low influence of quality on sales performance, the government needs to evaluate the quality management of asbestos survey and monitoring service providers and provide the results to public in order to address their low levels of quality management.