• Journal of Communications and Networks
• /
• v.13 no.6
• /
• pp.602-611
• /
• 2011

The inter-domain routing scalability issue is a major challenge facing the Internet. Recent wide deployments of multihoming and traffic engineering urge for solutions to this issue. So far, tunnel-based proposals and compact routing schemes have been suggested. An implicit assumption in the routing community is that structured address labels are crucial for routing scalability. This paper first systematically examines the properties of identifiers and address labels and their functional differences. It develops a simple Internet routing model and shows that a binary relation T defined on the address label set A determines the cardinality of the compact label set L. Furthermore, it is shown that routing schemes based on flat address labels are not scalable. This implies that routing scalability and routing stability are inherently related and must be considered together when a routing scheme is evaluated. Furthermore, a metric is defined to measure the efficiency of the address label coding. Simulations show that given a 3000-autonomous system (AS) topology, the required length of address labels in compact routing schemes is only 9.12 bits while the required length is 10.64 bits for the Internet protocol (IP) upper bound case. Simulations also show that the ${\alpha}$ values of the compact routing and IP routing schemes are 0.80 and 0.95, respectively, for a 3000-AS topology. This indicates that a compact routing scheme with necessary routing stability is desirable. It is also seen that using provider allocated IP addresses in multihomed stub ASs does not significantly reduce the global routing size of an IP routing system.

• Journal of Korean Society for Quality Management
• /
• v.42 no.2
• /
• pp.165-177
• /
• 2014

Purpose: This study analyzes the strategical priority to improve eco-labelling certification system, focused on biodegradable resin. Methods: This study will come up with measures to operate the eco-Label certification system related to biodegradable products more effectively and efficiently by discovering various problems related to the system, using causal loop diagram and AHP analysis. Results: This study shows that the government should play more important role while firms could also serve their roles in the initial and stabilizing stages of the eco-labelling certification system, in order to vitalize the eco-Label certification system more effective. Conclusion: This study addresses strategic eco-labelling policies on governmental and firm's operation and providers guidance to practitioners in addressing strategic decision relating to eco-labelling certification system.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 2009.10a
• /
• pp.136-146
• /
• 2009

This performed a study for the warning indication method and to prevent "defect in expression" that could occur at a product use stage in this study. To accomplish this, companies can increase effectiveness in the warning process presented apply to products which have a direct warning methodology by looking at the combination of research has demonstrated. How to study the existing warning signs of improvement throughout the consumer's visibility, readability, increased availability understand this consumer satisfaction measurement results confirm the safety three years could find lasting satisfaction to rise.

• Archives of design research
• /
• v.16 no.3
• /
• pp.421-430
• /
• 2003

During the past years private brand sales in supermarkets grew more rapidly then manufacturer brands. Store brand products account for more than one-fifth of total volume sales in the United States and are outpacing national brand growth. The most compelling reason for this increased presence in the market is their price differential with national brands. A general tendency of store brand sales in Korea also is on the increase over the years. On the other hand there is something yet to learn in the field of private label. The research has resulted in consumers changing their perception of store brand products from one of low quality to one of premium quality. Reduced price is not the only answer for store brand to be survive. The new marketing approach should include better packaging improved quality and specific advertising and promotional programs designed to increase customer awareness and sales of store brand products.

• Journal of Digital Convergence
• /
• v.18 no.11
• /
• pp.493-500
• /
• 2020

The purpose of this study is to analyze the effect of the visual element of the label design image of premium lunch boxes and general lunch boxes on purchasing intention. As a method of research, the label design images and purchase intentions of premium lunch boxes and general lunch boxes from the nation's leading convenience store brands, Seven Eleven, GS25, and CU, were investigated through a survey, T-verification was conducted based on the measured average value and standard deviation was completed after analysis with SPSS 21. The results of the study showed that the label design of premium lunch boxes was recognized by consumers as a premium image that was a point of differentiation from general lunch boxes, and that the proportion of "quality" and "menu composition" was high, This indicates that convenience store premium lunch boxes could also offer consumers a competitive edge in value that is considered premium other than "price."

• Journal of Energy Engineering
• /
• v.25 no.4
• /
• pp.198-206
• /
• 2016

Fuel economy label will be used as a national indicator in energy management, leading to the development of car technology manufacturer and plays a role in providing consumer vehicle purchase information. But the government's fuel economy label is continued consumer complaint is different and diminishing fuel economy were introduced by the government to measure the exact fuel economy label than resetting the 5-cycle test method in the US for the domestic vehicle standards. Originally two test mode in order to reduce the impact of the sharp increase in the resources required but methods of calculating a measured result value by driving all of the five test mode a variety of environmental conditions and the running pattern is reflected to the fuel economy label (city( FTP-75 mode), highway(HWFET mode)) and using 5-cycle correction formula for calculating a fuel consumption value and the equivalent value to calculate the result of the 5-cycle test. The compensation was calculated expression 30s, 5-Cycle Test Method of vehicles in 2011 was considered necessary to review the existing 5-cycle correction formula for the New Type car due to the recent rapid development of automotive technology. In this study, recent technology is targeting 14 units New Type car applied over the same test method and the existing check test mode specific fuel economy properties and, as a result of analyzing the corrected expression differences that have already been developed with the existing test vehicle resulting large did not show the difference was found to correction formula also not getting the existing fuel correction expression significant effect on the improvement of the current automobile technology as a maximum error of less than 1.5%.

• Journal of Communications and Networks
• /
• v.11 no.3
• /
• pp.297-305
• /
• 2009

Multiprotocol label switching (MPLS) networks require dynamic flow admission control to guarantee end-to-end quality of service (QoS) for each Internet protocol (IP) traffic flow. In this paper, we propose to tackle the joint routing and admission control problem for the IP traffic flows in MPLS networks without rerouting already admitted flows. We propose two mathematical programming models for this problem. The first model includes end-to-end delay constraints and the second one, end-to-end packet loss constraints. These end-to-end QoS constraints are imposed not only for the new traffic flow, but also for all already admitted flows in the network. The objective function of both models is to minimize the end-to-end delay for the new flow. Numerical results show that considering end-to-end delay (or packet loss) constraints for all flows has a small impact on the flow blocking rate. Moreover, we reduces significantly the mean end-to-end delay (or the mean packet loss rate) and the proposed approach is able to make its decision within 250 msec.

• The Journal of Industrial Distribution & Business
• /
• v.14 no.1
• /
• pp.49-56
• /
• 2023

Purpose: This research aims to explore the impact of fashion marketing on the sales of luxury brand items and to identify the strategies that can be used to market luxury fashion items successfully, addressing the research gap of how fashion marketing can lead to increased sales, customer loyalty, and satisfaction for luxury brand items. Research design, data and methodology: The present study conducted the method of the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) which is a reporting guideline for methodical assessments and meta-analyses. It offers a consistent approach for conducting and reporting these types of studies, which can help to improve their quality and transparency. Results: The findings indicated that fashion marketing can positively impact luxury brand sales. It can significantly increase the number of luxury brand purchases. the presence of the quality label increased the participants' purchase intention and attitude towards the brand, suggesting that the quality label can create a positive perception of the brand and increase the likelihood of purchasing. Conclusions: This research concludes that fashion marketing can have a positive effect on improved customer recognition of the brand. Thus, companies should focus on developing campaigns that capture the attention of potential consumers, creating an emotional connection with them.

• The Journal of Society for e-Business Studies
• /
• v.22 no.3
• /
• pp.57-74
• /
• 2017

The Electronic Shelf Label (ESL) is an alternative to the paper price label attached to merchandise shelves and is attracting attention as a retail IoT infrastructure that will lead the innovation of offline retail outlets. In general, when introducing a substitute product, the company tends to consider the financial factors such as the efficiency of the investment cost compared to the existing product or the reduction of the operating cost. However, considering only financial factors in the decision-making process, it may not properly reflect the various values associated with corporate strategy and the requirements of stakeholders. In this study, 8 evaluation items (Investment Cost, Operating Cost, Quality Level, Customer Management, Job Efficiency, Maintenance, Functional Expandability, and Store Image) based on BSC's 4 perspectives (Financial, Customer, Internal Business Process, Learning & Growth), and using AHP (Analytic Hierarchy Process) to measure the priorities of evaluation items for domestic small supermarket employees. As a result of the research, priority was given in order of Customer, Learning & Growth, Internal Business Process, and Financial aspects among the evaluation items for adopting the price label, and the electronic price label was supported with higher importance than the paper price label. In contrast to the priorities of the financial aspects of most prior studies, the items of Learning & growth and customer perspectives have relatively high priorities. In particular, respondents classified by job group, The priorities of the 8 evaluation items were different among the groups. These results are expected to provide implications for both companies (retail outlets) and ESL providers (manufacturers and service providers) who are considering the introduction of ESL.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2000.04a
• /
• pp.686-691
• /
• 2000

최근 들어 인터넷의 사용이 급격히 증가함에 따라 인터넷의 백본망에는 패킷 전달의 고속성, 확장성 뿐만 아니라 QOS 보장을 요구하게 되었다. 효과적인 인터넷 백본망을 구현하기 위해 본 논문에서는 Multi-Protocol Label Switching(MPLS)를 고려하고 MPLS 에서 인터넷 Quality Of Service(QOS) 서비스 모델 중 백본망에 적합한 Differentiated Service(DS) 모델을 그대로 제공하기 위해 MPLS 와 DS 의 연동에 대한 문제를 다룬다. 우선 MPLS 에서 QOS 제공을 위한 기능요소를 정성적으로 분석한다. 그리고 두 DS 망 가운데 ATM 기반의 MPLS 망을 두고 있는 경우를 가정하여, 종단대 종단간 DS 제공을 위하여 DS 망과 MPLS 망에서의 시그널링 과정을 제안한다. 즉, DS 의 BB 로부터 SLA 를 위한 신호를 MPLS 의 입구 라우터에서 해석하여 DS Type-Length-Value(TLV)를 만들고 이를 이용하여 Constraint-based Label Distribution Protocol(CR-LDP) 시그널링을 통해 마다 Label-Only-Inferred-PSC LSP(L-LSP)를 설립하여 MPLS 에서 DS QOS 를 그대로 제공한다. 또한 입구 DS BB 로부터의 정보를 MPLS 망을 통해 BB 에게 보낸다.