• 대한전자공학회논문지
• /
• 제26권11호
• /
• pp.1712-1720
• /
• 1989

We propose a new radiating structure composed of a strip and a slot excited by an ideal current source, and electromagnetic analysis for the structure is presented. By the analysis procedure which is based upon equivalence formulated. Through the numerical computations to solve the equations by employing the method of moments, we ascertained that the suitable choice of the location and the size of strip guarantee the improvement of the radiation characteristics of antenna.

• 대한전자공학회논문지SD
• /
• 제39권1호
• /
• pp.67-75
• /
• 2002

본 논문에서는 대략적인 PEEC 방법에 대해 논의 하고, 도선에 대하여 PEEC 등가회로를 구성하였으며, 주어진 등가회로로 부터 시스템의 행렬을 구하고, 이 행렬을 수치 해석적인 방법을 이용한 시뮬레이션을 수행하여 노드에서의 전압과 전류를 구하였다. PEEC 등가 회로를 구성하기 위해서, PEEC 등가 회로를 구성하는 성분(R, L, C)을 유한 요소법(finite element method)을 이용한 시뮬레이터를 이용하여 추출하였으며, 생성된 등가 회로에 대한 과도 해석을 수행하였다.

• 한국전산유체공학회지
• /
• 제15권2호
• /
• pp.7-13
• /
• 2010

Flight vehicles such as wheel wells and bomb bays have many cavities. The flow around a cavity is characterized as an unsteady flow because of the formation and dissipation of vortices brought by the interaction between the free stream shear layer and the internal flow of the cavity. The resonance phenomena can damage the structures around the cavity and negatively affect the aerodynamic performance and stability of the vehicle. In this study, a numerical analysis was performed for the cavity flows using the unsteady compressible three-dimensional Reynolds-Averaged Navier-Stokes (RANS) equation with Wilcox's turbulence model. The Message Passing Interface (MPI) parallelized code was used for the calculations by PC-cluster. The cavity has aspect ratios (L/D) of 5.5 ~ 7.5 with width ratios (W/D) of 2 ~ 4. The Mach and Reynolds numbers are 0.4 ~ 0.6 and $1.6{\times}10^6$, respectively. The occurrence of oscillation is observed in the "shear layer and transient mode" with a feedback mechanism. Based on the Sound Pressure Level (SPL) analysis of the pressure variation at the cavity trailing edge, the dominant frequencies are analyzed and compared with the results of Rossiter's formula. The dominant frequencies are very similar to the result of Rossiter's formula and other experimental datum in the low aspect ratio cavity (L/D = ~4.5). In the high aspect ratio cavity, however, there are other low dominant frequencies of the leading edge shear layer with the dominant frequencies of the feedback mechanism.

• Structural Engineering and Mechanics
• /
• 제6권6호
• /
• pp.583-612
• /
• 1998

A unified third-order laminate plate theory that contains classical, first-order and third-order theories as special cases is presented. Analytical solutions using the Navier and L$\acute{e}$vy solution procedures are presented. The Navier solutions are limited to simply supported rectangular plates while the L$\acute{e}$vy solutions are restricted to rectangular plates with two parallel edges simply supported and other two edges having arbitrary combination of simply supported, clamped, and free boundary conditions. Numerical results of bending and vibration for a number of problems are discussed in the second part of the paper.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.498-503
• /
• 2009

얕은기초의 침하량은 기초강성에 따라 크게 좌우되지만 기존의 이론적인 연구결과는 실무에 적 하기에 불충분하였다. 그러므로, 본 연구에서는 3차원 수치해석법을 이용하여 직사각형 기초의 길이비에 따른 강성 보정계수를 산정하고자 하였다. 우선, Mayne & Poulos(1999)가 정사각형 기초에 대하여 제안한 강성 보정계수와 비교하여 본 수치해석 기법의 적용성을 검증하였다. 그리고, 검증된 수치해석 기법을 적용하여 직사각형 기초의 길이비를 L/B=1, 2, 5로 달리하여 해석을 수행하였다. 그 결과, 동일한 기초강성에서 기초의 길이비(L/B)가 증가함에 따라 강성 보정계수 값이 점차 증가하는 결과를 보여주었다. 그러나 L/B=5 인 경우에는 강성계수가 10이상 되더라도 기초는 완전강성 거동을 보이지 않았다.

• 대한영양사협회학술지
• /
• 제15권4호
• /
• pp.356-363
• /
• 2009

The study aimed to determine the optimal mixing ratio of two different amounts of Letinus edodes powder and egg for preparation of pasta. The complete analysis was conducted using the Design Expert 7 program (State-Easy, Minneapolis, MN). Response surface methodology revealed 10 experimental points, including two replicates for L. edodes powder and egg. L. edodes pasta formulation was optimized using rheology. Lightness and redness displayed a lineal model pattern, whereas yellowness was represented by a quadratic model. The sensory evaluation parameters of texture, color, flavor, appearance and overall quality showed significant differences for color (p<0.01), flavor (p<0.05), texture (p<0.05) and overall quality (p<0.05). All sensory parameters showed significant values in a quadratic model. The optimum formulations processed by numerical and graphical optimization were determined as 15 g of L. edodes powder and 37.5 g of egg.

• Structural Engineering and Mechanics
• /
• 제12권3호
• /
• pp.341-346
• /
• 2001

Near source earthquakes can be characterized not only by strong horizontal but also by strong vertical ground motions with broad range of dominant frequencies. The inelastic horizontal response of thin-walled L-shaped steel bridge piers, which are popularly used as highway bridge supports, subjected to simultaneous horizontal and vertical ground excitations of near source earthquakes is investigated. A comprehensive damage index and an evolutionary-degrading hysteretic model are applied. Numerical analysis reveals that the strong vertical excitation of a near source earthquake exerts considerable influences on the damage development and horizontal response of thin-walled L-shaped steel bridge piers.

• Architectural research
• /
• 제24권2호
• /
• pp.53-61
• /
• 2022

Irregularities in the structure are crucial factors in screening structural vulnerability under extreme loadings. Numerical analyses were carried out considering wind and seismic loadings for four structures with discrete irregularity: continuous and discontinuous beams with varied story levels, and L-shaped irregular buildings. Structural responses such as maximum displacements, bending moments, axial forces, torsions, and story drifts are evaluated as per the criteria and limits defined by ACI 318. The outcomes indicate that the frame system with beam discontinuity on the upper half of the height exhibits the best structural performance. The results also indicate that the asymmetrical design of the L-shaped model makes it more susceptible to damage when subjected to strong lateral loading conditions.

• 한국농공학회지
• /
• 제33권4호
• /
• pp.73-83
• /
• 1991

A numerical simulation of a 2-dimensional tidal flow in a shallow sea was performed using the frequency domain finite element method. In this study, to overcome the inherent problems of a time domain model which requires high eddy viscosity and small time steps to insure numerical stability, the harmonic function incorporated with the linearized function of governing equations was applied. Calculations were carried out using the developed tidal model(TIDE) in a rectangular channel of lOm(depth) X 4km (width) X 25km(length) under the condition of tidal waves entering the channel closed at one end for both with and without bottom friction damping. The predicted velocities and water levels at different points of the channel were in close agreement with less than 1 % error between the numerical and analytical solutions. The results showed that the characteristics of the tidal flow were greatly affected by the magnitude of tidal elevation forcing, and not by on surface friction, wind, or the linear bottom friction when the value was less than 0.01. For the optimum size of grid to obtain a consistent solution, the ratio between the length of the maximum grid and the tidal wave length should be less than 0.0018. It was concluded that the finite element tidal model(TIDE) developed in this study could handle the numerical simulation of tidal flows for more complex geometrical conditions.

• Computers and Concrete
• /
• 제26권2호
• /
• pp.151-159
• /
• 2020

This paper presents an evaluation of shear transfer across cracks in reinforced concrete through finite element modelling (FEM) and analytical predictions. The aggregate interlock is one of the mechanisms responsible for the shear transfer between two slip surfaces of a crack; the others are the dowel action, when the reinforcement contributes resisting a parcel of shear displacement (reinforcement), and the uncracked concrete comprised by the shear resistance until the development of the first crack. The aim of this study deals with the development of a 3D numerical model, which describes the behavior of Z-type push-off specimen, in order to determine the properties of interface subjected to direct shear in terms cohesion and friction angle. The numerical model was validated based on experimental data and a parametric study was performed with the variation of the concrete strength. The numerical results were compared with analytical predictions and a new equation was proposed to predict the maximum shear stress in cracked concrete.