• Title/Summary/Keyword: kraft

Search Result 266, Processing Time 0.027 seconds

Application of Microorganism to Pulping and Bleaching Processes (펄프 및 표백공정(漂白工程)에서의 미생물응용(微生物應用))

  • Sakai, Koki
    • Journal of the Korean Wood Science and Technology
    • /
    • v.20 no.3
    • /
    • pp.67-78
    • /
    • 1992
  • The application of white-rot fungi to pulping and bleaching processes has been studied at the Wood Chemistry Laboratory in Kyushu University, cooperatively with the Biotechnology Laboratory of Kobe Steel, Ltd. Some successful results of the studies for a biomechanical pulping process, biobleaching of hardwood and softwood kraft pulp, as well as chlorine free biobleaching of oxygen-prebleached hardwood kraft pulp are dealt with. Biological treatment of the pulp bleaching effluent is also described.

  • PDF

Mediator-Assisted Biobleaching of Kraft Pulp by Laccase from Botrytis cinerea

  • Kim, Myungkil
    • Journal of the Korean Wood Science and Technology
    • /
    • v.32 no.3
    • /
    • pp.52-58
    • /
    • 2004
  • The use of N-hydroxyphthalimide (NHPI) as a mediator for laccase has proven to be comparable to N-hydroxybenzotriazole (HBT) for the delignification of kraft pulp, and the transformation of a number of industrial dyes. The advantages of NHPI derivatives are the biodegradation of these compounds compared to HBT, which has been shown to be recalcitrant in the environment, and the more reasonable cost of synthetic process.

Bleaching of Kraft Pulp with Lignin - Degrading Enzymes

  • Harazono, Koich;Kondo, Ryuichrto;Sakai, Kokki
    • Journal of Korea Technical Association of The Pulp and Paper Industry
    • /
    • v.29 no.2
    • /
    • pp.83-90
    • /
    • 1997
  • An unbleached hardwood kraft pulp was bleached in vitro with partially purified manganese peroxidase (MnP) from the fungus Phanerochaete sordida YK-624 without the addition of MnSO$_4$ in the presence of oxalate, malonate or gluconate known as manganese chelator, When the pulp was treated without the addition of MnSO$_4$, the pulp brightness increased by about 10 points in the presence of 2 mM oxalate, but the brightness did not significantly increase in the presence of 50 mM malonate. Residual MnP activity decreased faster during the bleaching with MnP without MnSO$_4$ in the presence of malonate than in the presence of oxalate. Oxalate reduced MnO$_2$ which already existed in the pulp or was produced from $Mn^{2+}$ by oxidation with MnP and thus supplied $Mn^{2+}$ to the MnP system. Thus, bleaching of hardwood kraft pulp with MnP, using manganese originally existing in the pulp, became possible in the presence of oxalate, a good manganese chelator and reducing reagent. Properties of partially purified MnPs from liquid cultures of white rot fungi, Ganoderma sp. YK-505, Phanerochaete sordida YK-624 and Phanerochaete chrysosporium were compared. MnP from Ganoderma sp. YK-505 was superior to MnPs from P. sordida YK-624 and P. chrysosporium in stabilities against high temperature and high concentration of $H_2O$$_2$. The MnP from Ganoderma sp. YK-505 differed in pH-activity profile from other MnPs. These data suggest that MnP from Ganoderma sp. YK-505 has different structure from those of other fungi. Bleaching of hardwood kraft pulp using the MnP from ganoderma sp. YK-505 is now in progress.

  • PDF

Studies on the Pulping of the Pinus koraiensis Sieb. et Zucc. Grown in Korea (I) -Effect of Heat Treatment of Chip on the Kraft Pulping- (한국산(韓國産) 잣나무의 펄프화(化)에 관한 연구(硏究)(I) -열처리(熱處理)가 크라프트 펄프화(化)에 미치는 영향(影響)-)

  • Park, Chong Yawl
    • Journal of Korean Society of Forest Science
    • /
    • v.61 no.1
    • /
    • pp.45-52
    • /
    • 1983
  • This study was carried out to find the effect of heat treatment on the pitch content and the properties of the kraft pulp produced from Pinus koraiensis. In the results of this experiments, the heat treatment with $40^{\circ}C$ showed the best result in the yields and the pitch contents of kraft pulp of the woods from both artificial and natural stands. Other properties, however, were not improved. They were rather deteriorated with heat treatment. Therefore, it needs to select, the heat treatment conditions according to the properties of raw material, the pulping methods and the final use of pulp.

  • PDF

The Effects of Phenolic Radical Carriers on the Enzymatic. Bleaching of Kraft Pulp (Kraft펄프의 효소표백반응에 미치는 페놀라디칼 전달체의 영향)

  • 류근갑
    • KSBB Journal
    • /
    • v.10 no.2
    • /
    • pp.183-190
    • /
    • 1995
  • The effects of enzymatic pretreatments on the bleaching of kraft pulp were studied. The kappa number of pulp samples which represents the lignin content of pulp decreased by 25.2% by the pretreatments with xylanase(EC 3.2.1.8, Pulpzyme HB) while it decreased by 13.7% without enzyme pretreatments after the extraction of the pretreated pulp samples in 1N NaOH. To enhance the effects of enzymatic pretreatment on the bleaching of kraft pulp, phenols were used as radical carriers with the simultaneous use of peroxidase(EC 1.11.1.7, Novozyme 502), $H_2O_2$, and xylanase. Guaiacol (1mM) was most effective by decreasing the kappa number by 29.6% when a low initial concentration of $H_2O_2$ (0.1mM) was used. The use of either a higher initial concentration of $H_2O_2$ or phenols lacking electron donating substituents such as phenol and p-chloyophenol, however, decreased the efficiency of enzymatic pretreatment indicating that the production rate and the stability of phenolic radicals are important parameters.

  • PDF

Removal of Toxicity from Kraft Pulp Mill Effluents by Activated Sludge Process (활성슬러지 공정에 의한 Kraft 펄프 폐수의 독성 제거)

  • Kim, Yeong-Kwan
    • Journal of Korean Society of Water and Wastewater
    • /
    • v.8 no.3
    • /
    • pp.9-18
    • /
    • 1994
  • Activated sludge pilot plant testing was conducted to determine the ability of a well-designed activated sludge treatment system to remove chromic toxicity from the bleached kraft pulp mill effluent. Removals of conventional(BOD and SS) and nonconventional(resin and fatty acids, color, AOX) pollutants were estimated. The pilot plant was operated at steady state for about 10 weeks at an F/M of 0.28 and a sludge age of 8.4 days. The average MLSS concentration was 4,309mg/l, of which volatile fraction was 57%. During the operation period, the BOD removal reaction rate(k) was determined to be 8.2/day at $30^{\circ}C$. The BOD removal was 84 percent, which was 3 to 6 percent lower than expected for full-scale treatment. The chronic toxicity of the activated sludge effluent was tested by employing both Dinnel and the BML protocols. It was found that the pilot plant could achieve in excess of 90 percent reduction in chronic echinoderm toxicity. The data show slight reduction of color and AOX across the activated sludge system. The pilot system, however, demonstrated on excellent removal of resin and fatty acids.

  • PDF

Utilization of Kenaf Cultivated in Korea (II) - Physical properties of kenaf TMP and KP - (국내산 Kenaf 이용에 관한 연구 (제2보) - Kenaf TMP와 KP의 물리적 성질 -)

  • Lee, Myoung-Ku;Yoon, Seung-Lak
    • Journal of Korea Technical Association of The Pulp and Paper Industry
    • /
    • v.39 no.4
    • /
    • pp.45-52
    • /
    • 2007
  • Whole, bast and core fibers of kenaf cultivar Tainung-2 were pulped under different pulping methods, thermomechanical and kraft pulping methods. The physical and optical properties of kenaf TMP(thermomechanical pulp) and KP(kraft pulp) handsheets were investigated and the results from the study are summarized as follows: Yields of TMP and KP were $77{\sim}87%\;and\;43{\sim}52%$, respectively. There was no significant change in apparent density between kenaf KP and USKP(unbleached softwood kraft pulp) but TMP showed a little lower apparent density. Bast pulp had the lowest apparent density regardless of pulping methods. Tensile strength of kenaf KP was higher than that of TMP but similar to that of USKP. Both TMP and KP handsheets of bast fraction showed the highest tear strengths among whole, bast, and core fractions. Core fraction showed the lowest tear strengths under different pulping methods. In general burst strength of kenaf pulp under different pulping methods was lower than that of USKP, and kenaf pulp had better stiffness than USKP. Brightness of kenaf KP and TMP was higher than that of USKP. There was no significant variation in opacity between kenaf pulp and USKP even though kenaf pulp showed a little lower opacity. The main difference in paper quality between the core fiber and bast fiber is derived from the fact that bast fiber is long and thin, whereas core fiber is short and thick.

Improvement of Hardwood Pulp Yield in Continuous Kraft Cooking and Estimation of Pulp Yields Pulp yields of isothermal cooking with polysulfide and anthraquinone

  • Ohi, Hiroshi;Yokoyama, Tomoya
    • Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
    • /
    • 2006.06b
    • /
    • pp.295-303
    • /
    • 2006
  • The pulp yield was improved by about 4.5-5% when polysulfide (PS) and anthraquinone (AQ) were added to the kraft cooking liquor (white liquor). The exchange of the black liquor with fresh white liquor further increased the yield. The highest pulp yield was obtained when the PS cooking liquor containing 70% of total active alkali (AA) and 100% of AQ was used from the beginning of the reaction and the black liquor was exchanged with fresh white liquor containing the residual 30% of AA just after temperature reached $135^{\circ}C$. There was a good correlation between kraft pulp yields of a hardwood species and the ratios of the amount of xylose to glucose (X/G ratio), liberated by an acid hydrolysis of the pulps. However, the correlation was dependent on raw material wood species. Therefore, it is required in advance to establish a correlation between the yields and X/G ratios for raw material wood species of a target pulp in order to estimate pulp yield using X/G ratio. The X/G ratios of relatively high yield pulps showed higher values than those expected from the correlation. In a mill trial, the superiority of the PS-AQ isothermal cooking (ITC) process over the kraft ITC process was confirmed by examining X/G ratio of pulps obtained. The pulp yield in the PS-AQ ITC process was estimated at about 57.0%. This yield is very high, which indicates that reaction conditions of the PS-AQ ITC process are optimal.

  • PDF

Bleaching of Kraft Pulp with Xylanase and Laccase-Mediator System

  • Yoon, Chulhyun;Jung, Hyunchae
    • Journal of Korea Technical Association of The Pulp and Paper Industry
    • /
    • v.46 no.1
    • /
    • pp.1-10
    • /
    • 2014
  • Xylanase (X) derived from Aurreobasidium pullulans and laccase-mediator system (LM) using Trichophyton sp. LKY-7 laccase (TrL) and N-hydroxy-2-pyridone analogue (NHP) as a mediator were applied in hardwood kraft pulp (HwKP) bleaching. The individual and the synergistic effects of X and LM stage were investigated in the enzymatic bleaching of HwKP. Also, the effects of subsequent alkaline extraction (E) and alkaline/hydrogen peroxide treatment (P) were examined. In X or LM treatment alone, an appreciable bleaching effect of HwKP was not observed, whereas subsequent E or P stage enhanced the increase of brightness and the decrease of kappa number. Especially, P stage significantly enhanced the bleaching effect of pulp. Bleaching of HwKP with XLM sequentially gave significantly higher pulp brightness and lower kappa number than that obtained after the treatment of HwKP with X+LM simultaneously. When HwKP was sequentially treated with XLM followed by P stage, the brightness increased by about 11% ISO and the kappa number decreased by about 3.6 in comparison with the initial pulp. Xylanase and laccase were strongly inactivated by NHP both in the absence and the presence of pulp.