• 상하수도학회지
• /
• 제26권4호
• /
• pp.555-563
• /
• 2012

Due to the importance of energy-saving and CO2 reduction is being emphasized in the world, efforts to find a solution for the problems is increasing rapidly. In particular, the renewable energy is on understanding as a breakthrough for the protection of the environment and the economic development, so it is intensively fostered as future industries. Developed countries are already pursuing policy and technology development related with renewable energy. In this paper, we will develop MHD(Magneto Hydro Dynamics) technology to supply the commercial power that can is targeted at water pipe related with hydro power among renewable energy technologies. Kinetic energy of fluid flowing in the water pipe is converted into electric power. It allows stable power supply to the various sensors and devices on water pipe. We have performed several experiments to verify the application possibility of the developed technologies and present the result and a method of performance improvement of the technologies.

• 한국응용과학기술학회지
• /
• 제35권3호
• /
• pp.612-621
• /
• 2018

본 연구에서는 전기분해 방법을 이용한 질산성질소($NO_3{^-}-N$) 분해가 $TiO_2$ nanotube plate 및 구리, 니켈, 스테인리스 스틸, 알루미늄, 주석, 티타늄을 환원전극으로 사용하였을 때 가능한지를 평가하였다. 전극의 전기화학적 특성 평가는 임피던스 측정을 하여 비교하였고, $TiO_2$ nanotube plate의 표면 분석은 주사전자현미경을 통해 SEM 및 BET 분석법을 이용한 비표면적 분석을 통해 비교하였다. 질산성질소 전해실험의 경우 90분의 실험을 진행하였으며, 실험 결과 전극 표면의 부식이 수반되지 않은 $TiO_2$ nanotube plate가 기타 금속 전극에 비해 질산성질소 환원 반응속도가 가장 뛰어난 것으로 확인되었다.

• 한국수소및신에너지학회논문집
• /
• 제25권4호
• /
• pp.378-385
• /
• 2014

In this research, we investigate electrical performance and electrochemical properties of graphene supported Pt (Pt/G) and PtM (M = Ni and Y) alloy catalysts (PtM/Gs) that are synthesized by modified polyol method. With the PtM/Gs that are adopted for oxygen reduction reaction (ORR) as cathode of proton exchange membrane fuel cells (PEMFCs), their catalytic activity and ORR performance and electrical performance are estimated and compared with one another. Their particle size, particle distribution and electrochemically active surface (EAS) area are measured by TEM and cyclic voltammetry (CV), respectively. On the other hand, regarding ORR activity and electrical performance of the catalysts, (i) linear sweeping voltammetry by rotating disk electrode and rotating ring-disk electrode and (ii) PEMFC single cell tests are used. The TEM and CV measurements demonstrate particle size and EAS of PtM/Gs are compatible with those of Pt/G. In case of PtNi/G, its half-wave potential, kinetic current density, transferred electron number per oxygen molecule and $H_2O_2$ production % are excellent. Based on data obtained by half-cell test, when PEMFC singlecell tests are carried out, current density measured at 0.6V and maximum power density of the PEMFC single cell employing PtNi/G are better than those employing Pt/G. Conclusively, PtNi/Gs synthesized by modified polyol shows better ORR catalytic activity and PEMFC performance than other catalysts.

• Environmental Engineering Research
• /
• 제19권3호
• /
• pp.185-195
• /
• 2014

Despite the enormous technical and economic efforts to improve environmental conditions, currently about 40% of the global population (or 2 billion people) are still lack access to safe water supply and adequate sanitation facilities. Pollution problems and transmission of water- related diseases will continue to proliferate. The rapid population growth and industrialization will lead to a reduction of arable land, thus exacerbating the food shortage problems and threatening environmental sustainability. Natural systems in this context are a transdisciplinary approach which employs the activities of microbes, soil and/or plants in waste stabilisation and resource recovery without the aid of mechanical or energy-intensive equipments. Examples of these natural systems are: waste stabilisation ponds, aquatic weed ponds, constructed wetlands and land treatment processes. Although they require relatively large land areas, the natural systems could achieve a high degree of waste stabilisation and at the same time, yield potentials for waste recycling through the production of algal protein, fish, crops, and plant biomass. Because of the complex interactions occurring in the natural systems, the existing design procedures are based mainly on empirical or field experience approaches. An integrated kinetic model encompassing the activities of both suspended and biofilm bacteria and some important engineering parameters has been developed which could predict the organic matter degradation in the natural systems satisfactorily.

• 한국축산식품학회지
• /
• 제29권3호
• /
• pp.310-316
• /
• 2009

In this study, the influence of pressure assisted mild thermal inactivation (PAMTI) on E. coli ATCC 10536 was examined at 200 MPa and temperature range of $20-50^{\circ}C$. Inactivation rate significantly increased (p<0.05) as temperature and time increased at 200 MPa. The maximum inactivation (7.91 log reduction) was obtained at $50^{\circ}C$ for 30 min under 200 MPa, which meant the complete inactivation of E. coli ATCC 10536. Inactivation kinetics were evaluated with the first order inactivation rate (k), activation energy ($E_a$), thermal death time (TDT), and z value. Kinetic parameters were significantly (p<0.05) influenced by variation temperature of PAMTI. In this study, the synergistic effect of pressure and temperature were found in the inactivation of E. coli ATCC 10536 through PAMTI.

• 한국분말재료학회지
• /
• 제25권4호
• /
• pp.322-326
• /
• 2018

The hydrogen reduction behavior of $MoO_3-CuO$ powder mixture for the synthesis of homogeneous Mo-20 wt% Cu composite powder is investigated. The reduction behavior of ball-milled powder mixture is analyzed by XRD and temperature programmed reduction method at various heating rates in Ar-10% $H_2$ atmosphere. The XRD analysis of the heat-treated powder at $300^{\circ}C$ shows Cu, $MoO_3$, and $Cu_2MoO_5$ phases. In contrast, the powder mixture heated at $400^{\circ}C$ is composed of Cu and $MoO_2$ phases. The hydrogen reduction kinetic is evaluated by the amount of peak shift with heating rates. The activation energies for the reduction, estimated by the slope of the Kissinger plot, are measured as 112.2 kJ/mol and 65.2 kJ/mol, depending on the reduction steps from CuO to Cu and from $MoO_3$ to $MoO_2$, respectively. The measured activation energy for the reduction of $MoO_3$ is explained by the effect of pre-reduced Cu particles. The powder mixture, hydrogen-reduced at $700^{\circ}C$, shows the dispersion of nano-sized Cu agglomerates on the surface of Mo powders.

• 대한기계학회논문집B
• /
• 제22권1호
• /
• pp.93-103
• /
• 1998

The paper reports the outcome of a numerical study of flow over idealized L-shaped ribleted surfaces with two-equation turbulence models. In the present study, the Launder and Sharma's k-.epsilon. turbulence model (LS model) is basically N employed, but with a little modification of the additional .epsilon.-source term without affecting its level under 2-dimensional straining in which the term has been calibrated. Compared to the original LS model, the present model has predicted greatly improved drag reduction behavior for this geometry. As a drag reduction mechanism, it is found that the skin-friction in the riblet valleys might be sufficient to overcome the skin-friction increase near the riblet tip. The present predicted results are in good agreement with the recent DN S ones by Choi et al. (1993): differences in the mean velocity prof ile and turbulence quantities are found to be limited to the riblet cavity region. It is also found that turbulent kinetic energy and Reynolds shear stress above the riblets are also reduced in drag-reducing configurations.

• 한국자기학회지
• /
• 제27권1호
• /
• pp.1-8
• /
• 2017

플라이휠 에너지 저장 장치(Flywheel Energy Storage System, FESS)은 회전 운동 에너지를 저장하는 플라이휠 부분과 저장된 회전 에너지를 전기 에너지로 변환시키는 전동기/발전기 부분으로 구성된다. 일반적으로 플라이휠의 회전축은 전동기 및 발전기의 회전축과 동축 일체형으로 연결되고, 이때 전동기 및 발전기의 전자기 토크특성에 따른 동특성 변화는 전체 플라이휠 에너지 저장 장치의 충방전 특성과 기계적인 출력에 영향을 미친다. 본 논문에서는 5[kWh] 급 플라이휠 에너지 저장 장치 용 3상 유도전동기의 설계방법과 회전자 슬롯 수 변화에 따른 토크리플 특성과 고조파 영향을 중점적으로 분석하였다. 먼저, 플라이휠 에너지 저장 장치의 용량과 관성 모멘트에 의한 회전운동에너지의 관계식으로부터 플라이휠 크기와 전동기의 회전자 크기를 산정하는 방법을 제안하였다. 또한 플라이휠 에너지 저장 장치의 회전축의 고속구동 조건을 반영하여, 고속운전 영역에서의 전동기 토크리플 저감을 위한 유도전동기 회전자 슬롯수를 선정하였다. 이로부터 본 논문에서는 전동기 회전축과 동축으로 구성된 플라이휠의 소음 진동을 줄이고 고효율 충방전 특성을 구현하고자 한다.

• 한국안전학회지
• /
• 제14권2호
• /
• pp.42-51
• /
• 1999

This research deals with the non-linearities associated with impact and sliding for the rocking behavior of rigid block subjected to two dimensional excitation of horizontal and vertical direction. The non-linearities examined of impact between block and base: The transition of two governing rocking equations, the abrupt reduction in kinetic energy associated with impact. In this study, the rocking vibration system of two types are considered for several friction condition. One is the undamped rocking vibration system, disregarding energy dissipation at impact and the other is the damped rocking system, including energy dissipation at impact. The response analysis by non-dimensional rocking equation is carried out for the change of excitation amplitude. The chaos responses were discovered in the wide response region, particularly, in the case of high vertical excitation and their chaos characteristics are examined by Poincare map, power spectra and Lyapunov Exponent. The complex behavior of chaos response, in the phase space, were illustrated by Poincare map. Therefore, Poincare map will be a significant material in order to understand chaos of rocking system.

• 한국항공우주학회지
• /
• 제34권12호
• /
• pp.59-66
• /
• 2006

하이브리드 로켓 연료의 연소율 향상을 위한 나선형 홈이 유동 특성에 미치는 영향을 규명하기 위하여 난류 증가와 선회 유동 발생에 대한 수치계산을 수행하였다. 나선형 튜브의 열전달 관계식을 이용하여 여러 형상의 나선형 홈이 있는 연료의 열전달 향상을 예측하였으며 연소율 측정값과 비교하여 상호 연관성을 확인하였다. 실험 결과와 열전달 향상 예측 값은 동일한 경향을 나타내더라도 수치는 큰 차이를 나타냈는데 이것은 연료가 연소하기 위하여 기화할 때 발생하는 분출속도가 존재하기 때문이다. 분출효과를 고려하여 RANS 계산을 수행한 결과, 난류에너지는 상당히 증가한 반면 선회 수는 조금 증가하는 결과를 보여 주었다. 그럼에도 불구하고 나선형 홈에 의한 난류 증가 또는 선회유동 생성은 연소율을 증가시키는 중요한 메커니즘임이 밝혀졌다. 그러나 분출로 인하여 난류에너지가 증가되어도 열전달 향상에 기여하지 못하는 것으로 확인되었는데 이것은 분출 속도가 표면의 경계층을 밀어내어 대류 열전달이 증가되는 것을 차단하기 때문인 것으로 밝혀졌다.