• Journal of Ginseng Research
• /
• v.39 no.4
• /
• pp.304-313
• /
• 2015

Background: Ginsenoside Rg3 is a promising anticancer agent. It is usually produced by heat treatment of ginseng, in which ginsenoside Rb1 is the major ginsenoside. A kinetic study was conducted to optimize ginsenoside Rg3 production by the heat treatment of ginsenoside Rb1. Methods: Ginsenoside Rb1 was heated using an isothermal machine at $80^{\circ}C$ and $100^{\circ}C$ and analyzed using HPLC. The kinetic parameters were calculated from the experimental results. The activation energy was estimated and used to simulate the process. The optimized parameters of ginsenoside Rg3 production are suggested based on the simulation. Results: The rate constants were $0.013h^{-1}$ and $0.073h^{-1}$ for the degradation of ginsenosides Rb1 and Rg3 at $80^{\circ}C$, respectively. The corresponding rate constants at $100^{\circ}C$ were $0.045h^{-1}$ and $0.155h^{-1}$. The estimated activation energies of degradation of ginsenosides Rb1 and Rg3 were 69.2 kJ/mol and 40.9 kJ/mol, respectively. The rate constants at different temperatures were evaluated using the estimated activation energies, and the kinetic profiles of ginsenosides Rb1 and Rg3 at each temperature were simulated based on the proposed kinetic model of consecutive reaction. The optimum strategies for producing ginsenoside Rg3 from ginsenoside Rb1 are suggested based on the simulation. With increased temperature, a high concentration of ginsenoside Rg3 is formed rapidly. However, the concentration decreases quickly after the reaching the maximal concentration value. Conclusion: The optimum temperature for producing ginsenoside Rg3 should be the highest temperature technically feasible below $180^{\circ}C$, in consideration of the cooling time. The optimum reaction time for heat treatment is 30 min.

• 한국해양학회지
• /
• v.21 no.3
• /
• pp.131-135
• /
• 1986

Conversion of energy from potential to kinetic form is considered when a step-like initial disturbance is released to reach a final steady state. For small amplitute disturbances, linearization can be made and it is proved analytically that the conversion factor (ratio of generated kinetic to loss in potential energies) asymptotically approaches to 1/3 as the horizontal scale of disturbances becomes large.

• Journal of Photoscience
• /
• v.9 no.2
• /
• pp.296-298
• /
• 2002

Irreversible photobleaching of bacteriorhodopsin (bR), namely denaturation induced by illumination of visible light, was investigated by absorption kinetic measurements. The denaturation kinetics revealed that light illumination significantly enhanced the structural decay of bR. The kinetic analyses showed that the molecular structure of bR denatures according to a single-exponential decay, whereas irreversible photobleaching has two decay components. The decay constant of the slow component of photobleaching is almost same as that in the dark. An Arrhenius plot of the denaturation kinetic constants for the fast and slow components showed similar activation energies of approximately 19 kcal/mol.

• Nuclear Engineering and Technology
• /
• v.41 no.8
• /
• pp.1073-1078
• /
• 2009

A kinetic model for the oxidation of a $UO_2$ pellet to $U_3O_8$ powder has been suggested by considering the mass transfer and the diffusion of oxygen molecules. The kinetic parameters were estimated by a fitting of the experimental data. The activation energies for the chemical reaction and the product layer diffusion were calculated from the kinetic model. The oxidation conversion of a $UO_2$ pellet was simulated at various operating conditions. The suggested model explains the oxidation behavior of $UO_2$ well.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.6
• /
• pp.117-125
• /
• 1998

The paper attempts to estimate the incubation time of a cavity in the interface between a power law creep particle and an elastic matrix subjected to a uniaxial stress. Since the power law creep particle is time dependent, the stresses in the interface relax. The volume free energy associated with Helmholtz free energy includes strain energies caused by applied stress and dislocations piled up in interface(DPI). The energy due to DPI is found by modifying the result of Dundurs and Mura[4]. The volume free energies caused by both applied stress and DPI are a function of the cavity size(r) and elapsed time(t) and arise from stress relaxation in the interface. Critical radius $r^*$ and incubation time $t^*$ to maximise Helmholtz free energy is found in present analysis. Also, kinetics of cavity formation are investigated using the results obtained by Riede [7]. The incubation time is defined in the analysis as the time required to satisfy both the thermodynamic and kinetic conditions. Through the analysis it is found that 1) strain energy caused by the applied stress does not contribute significantly to the thermodynamic and kinetic conditions of a cavity formation, 2) in order to satisfy both thermodynamic and kinetic conditions, critical radius $r^*$ decreases or holds constant with increase of the time until the kinetic condition(eq. 2.3) is satisfied. there for the cavity may not grow right after it is formed, as postulated by Harris [15], and Ishida and Mclean [16], 3) the effects of strain rate exponent (m), material constant $\sigma$0, volume fraction of the particle to matrix(f)and particle size on the incubation time are estimated using material constants of the copper as matrix.

• KIEAE Journal
• /
• v.15 no.3
• /
• pp.15-20
• /
• 2015

Purpose: Suggesting a working prototype of a kinetic light shelf unit and revealing its energy efficiency by a series of building performance simulations were presented. Recently, kinetic building envelope has been an emerging technology as an innovative way to control exterior building environment, but products from many researches about the facade could not been reached to the industrialization so far. That is because its initial installation, operation and maintenance costs are still too high to use for the practical field, although buildings using kinetic envelopes could decrease their energy consumption significantly. This narrow point of view needs to be reconsidered, since buildings require great amount of energies to run their functions through the whole life and using better building components can lead to achieve much more benefits in aspects of the lifecycle cost (LCC). Method: A series of certified simulation tools like Ecotect and Green Building Studio that are normally used for researches and developments in the field of architecture were utilized. Result: Based on simulation analyses, the result of the study has showed that the proposed system definitely has adaptability to the professions and positively shows practicability as advanced integrative building envelopes with renewable energy association.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.22 no.6
• /
• pp.391-396
• /
• 1990

Changes in electric resistance was measured to carry out the kinetic analysis of milk gellation upon addition of rennet. Using pasteurized milk and commercial rennin, kinetic properties were investigated during milk gellation in terms of initial hydrolysis and coagulation steps. Specially designed reactor with two platinum electrodes was used throughout the experiments. As a function of either milk concentrations or reaction temperatures, gel time exhibited directly proportional relations: on the contrary, gel time was inversely pro-portional to enzyme concentration. Activation energies for enzymatic degradation and cogulation were 16.3, 4.6 and 34, 8.6 Kcal/mol, repectively. This simple analytical method proved to be very effective to characterize the mechanism of milk gellation. Moreover, unlike other methods, this method reguired simple apparatus and short time of analysis.

• Journal of the Korean Ceramic Society
• /
• v.47 no.1
• /
• pp.39-46
• /
• 2010

The kinetics of cation reequilibration have been studied theoretically and experimentally in complex oxides after an external perturbation of equilibrium by temperature jumps. A general kinetic model for cation redistribution amongst non-equivalent sites in complex oxides is derived based on a local homogeneous point defect mechanism involving cation vacancies. Temperature-jump optical relaxation spectroscopy has been established to investigate cation kinetic processes in spinels and olivines. The kinetic model satisfactorily describes the experimental absorbance relaxation kinetics in cobalt containing olivines and in nickel containing spinels. It is found that the kinetics of cation redistribution in complex oxides shows a strong temperature- and composition-dependence. Activation energies for cation redistribution in Co-Mg olivines are found to range between 200 and 220 kJ/mol whereas an energy barrier of about 230 kJ/mol is observed in the case of nickel gallate spinel.

• Macromolecular Research
• /
• v.12 no.5
• /
• pp.466-473
• /
• 2004

We have used FT-IR spectra to explain the effects of hydrogen bonding between chitosan and polycaprolactam (PA6). A dynamic mechanical analysis study suggested that the optimum chitosan and PA6 miscibility under the conditions of this experiment were obtained at a blending ratio of 40:60. We studied the thermal degradation of chitosan blended with PA6 (chitosan/PA6) by thermogravimetric analysis and kinetic analysis (by the Ozawa method). Dry chitosan and PA6 exhibited a single stage of thermal degradation and chitosan/PA6 blends having> 20 wt% PA6 exhibited at least two stages of degradation. In chitosan/PA6 blends, chitosan underwent the first stage of thermal degradation; the second stage proceeded at a temperature lower than that of PA6, because the decomposition product of chitosan accelerated the degradation of PA6. The activation energies of the blends were between 130 and 165 kJ/mol, which are also lower than that of PA6.

• Coupled systems mechanics
• /
• v.6 no.1
• /
• pp.17-28
• /
• 2017

In this work, we extend the previously developed split kinetic energy (dubbed KEP) method by Mineo and Chao (2012) by modifying the mass parameter to include the negative mass. We first show how to separate the total system into the subsystems with 3 attractive delta potentials by using the KEP method. For repulsive delta potentials, we introduce "negative" mass terms. Two cases are demonstrated using the "negative" mass terms for repulsive delta potential problems in quantum mechanics. Our work shows that the KEP solution scheme can be used to obtain not only the exact energies but also the exact wavefunctions very precisely.