• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1795-1798
• /
• 2003

This paper presents a method for impeller modeling by the reverse engineering and the 5-axis machining. The impeller is composed of pressure surface, suction surface and leading edge, and so on. The impeller is modeled by using the characteristic curves of impeller such as hub curves, shroud curves and leading edge. The characteristic curves are extracted from the scanned data. The hub curves and shroud curves are generated by intersection between blade surface and hub boundary and shroud boundary. respectively. A sample impeller machining is performed by tool path plan and post-processing with inverse kinematic solution.

• 한국항행학회논문지
• /
• 제3권1호
• /
• pp.13-19
• /
• 1999

미지 정수가 올바로 결정된 GPS 반송파 위상을 사용하면 cm 수준의 높은 위치 정확도가 요구되는 정밀 측위를 수행할 수 있다. 제주도 도깨비 도로는 착시 현상으로 인해 육안으로는 올바른 경사도를 파악할 수 없다. 본 논문에서는 반송파 보정 위성 항법 시스템의 높은 위치 정확도를 이용하여 제주도 도깨비 도로의 정확한 경사도를 계산하기 위해 동적 측위 실험을 수행하였다. 반송파 보정 위성 항법 시스템을 사용하여 실험 데이터를 후처리한 결과, cm 수준의 정확도로 도깨비 도로 노면의 정확한 형태를 알 수 있었다.

• 한국정밀공학회지
• /
• 제21권6호
• /
• pp.60-68
• /
• 2004

This paper presents a method fur impeller modeling and 5-axis machining by the reverse engineering. The impeller is composed of pressure surface, suction surface and leading edge, and so on. The surfaces can be modeled by using the characteristic curves such as hub curves, shroud curves and fillet curves. The characteristic curves are extracted from the scanned data and the inspection is performed between the surfaces generated by using the characteristic curves and the scanned data. Then, An impeller is machined by 5-axis mainlining and post-processing with inverse kinematic solution.

• International Journal of Ocean Engineering and Technology Speciallssue:Selected Papers
• /
• 제6권1호
• /
• pp.22-29
• /
• 2003

This research aims at investigation of accuracy potential of RTK(Real-Time Kinematic) GPS in combination with Echo Sounder(E/S) for the coastal mapping. Apart from this purpose, the accuracy of ambiguity resolution with the OTF(On The Fly) method was tested with respect to the initialization time. The result shows that the accuracy is better than 1cm with 5-minute initialization in the distance of 10km baseline. The seaside topography was measured by the RTK GPS only, on the other hand the seafloor topography was surveyed in combination of RTK GPS and E/S. Comparing to the volume of seaside measured by RTK GPS and digital topographical map, the difference of only 2% was achieved. This indicates that the coastal mapping. As a result, it has been revealed that every possible noise in surveying could be corrected and the accuracy could be improved. The accuracy of GPS data acquired in real time was as good as that acquired by post processing. It is expected that it will be useful for the analysis of coastal geographic characteristics because DTM(Digital Terrain Model) can be also constructed for the harbor reclamation, the dredging, and the variation of soil movement in a river.

• 한국해양공학회지
• /
• 제17권3호
• /
• pp.13-20
• /
• 2003

This research aims at investigation of accuracy potential of RTK(Real-Time Kinematic) GPS in combination with Echo Sounder(E/S) for the coastal mapping. Apart from this purpose, the accuracy of ambiguity resolution with the OTF(On The Fly) method was tested with respect to the initialization time. The result shows that the accuracy is better than 1cm with 5-minute initialization in the distance of 10km baseline. The seaside topography was measured by the RTK GPS only, on the other hand the seafloor topography was surveyed in combination of RTK GPS and E/S. Comparing to the volume of seaside measured by RTK GPS and digital topographical map, the difference of only $2\%$ was achieved. This indicates that the coastal mapping. As a result, it has been revealed that every possible noise in surveying could be corrected and the accuracy could be improved. The accuracy of GPS data acquired in real time was as good as that acquired by post processing. It is expected that it will be useful for the analysis of coastal geographic characteristics because DTM(Digital Terrain Model) can be also constructed for the harbor reclamation, the dredging, and the variation of soil movement in a river.

• Journal of Positioning, Navigation, and Timing
• /
• 제13권1호
• /
• pp.103-110
• /
• 2024

In this paper, a test bed for real-time network Real-Time Kinematic (RTK) research was constructed using reference stations of the NGII. A group of candidate station networks was derived, including three stations in Seoul. The group consisted of four stations with a distance of less than 100 km between them. Among several candidates, a network composed of stations with short distances between them and demonstrating good data quality for all reference stations was selected as the test bed. After collecting real-time data in Radio Technical Committee for Maritime services (RTCM) format from the selected stations and conducting a noise analysis on measurements, mm-level carrier phase measurement noise was confirmed. Afterwards, the user set the reference station inside the test bed and analyzed the network RTK positioning performance of the MAC method using the GPS L1 frequency as post-processing. From the result of the analysis it was confirmed that the residual error for all users was within 10 cm after applying the correction. Additionally, after determining integer ambiguities through Least-squares AMBiguity Decorrelation Adjustment (LAMBDA), it was confirmed that the fix rate was 100%, and all ambiguities were resolved as true values.

• 대한공간정보학회지
• /
• 제17권3호
• /
• pp.23-31
• /
• 2009

국가에서 해안선의 경계는 국토의 경계를 결정하는 중요한 요소지만, 최근 온난화로 인한 해수면 상승과 수십 년간에 걸친 성장위주의 경제정책으로 인해 우리나라의 해안선은 급격히 변하고 있다. 본 연구는 인근지역에 위치하면서 서로 동일한 해양조건을 가지고 있는 두 개의 해수욕장에서 해안선이 자연모습 그대로 보존된 지역과 인공구조물로 인해 주변의 해안선이 훼손된 지역을 중심으로 이루어 졌다. 먼저 1947년에서 2007년까지의 항공사진을 이용하여 해안선을 추출하고, 이를 후처리 Kinematic GPS 측량방식을 적용하여 획득한 육상부의 지형자료와 선박을 이용해 단빔음향측심기(Echotrac 3100)와 DGPS(Beacon)로 구성된 수로측량자동화시스템을 통해 획득한 수심측량 자료를 이용해 조위를 보정했다. 그리고 결정된 해안선을 이용해 60년간의 변화와 면적 변화량을 5개의 구간으로 나눠서 구했다. 그 결과 1947년에 비해 2007년에 해운대 해수욕장은 서쪽지역을 중심으로 급격히 면적이 감소하면서 총 -29%의 면적 감소율을 보였고, 광안리 해수욕장은 양끝의 인공구조물에 의한 유속의 감소로 인한 퇴적이 이루어지면서 총 69% 면적이 증가해 동일해양조건임에도 불구하고 주변 환경에 따라 해빈의 침 퇴적 경향에 큰 차이가 있음을 알 수 있었다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제33권7호
• /
• pp.1068-1076
• /
• 2020

Objective: In the present study, we determined efficiency of incorporating caffeine, melatonin or omega-3 polyunsaturated fatty acid in the diluent on mitigating consequences of (a) liquid chilled- and (b) cryo-storage of ram spermatozoa. Methods: In the first experiment, ejaculates (n = 30) were collected from 5 adult rams and were pooled, diluted (1:10) with Tris-citric acid (base diluent) and were split into 4 aliquots assigned for: control (untreated), caffeine (0.1 mM), melatonin (0.3 mM) or omega-3 fatty acids (0.3 mM) (T₀). The diluted specimens were stored at 4℃ for 48 h, during which sperm physical and cytological properties were evaluated along with oxidative stress indices (T₂₄, T₄₈). In the second experiment, 15 ejaculates (3 per male) were pooled, diluted with glycerolized base diluent (4% glycerol, v/v) and were split corresponding to the same previous treatment groups before being processed for cryopreservation. Post-thaw physical and kinematic sperm properties were assessed by a computer-assisted sperm analysis system. Results: The results clarified superiority of both melatonin and omega-3 supplementation on maintaining (p<0.05) sperm properties, while reducing (p<0.05) lipid peroxidase reaction and enzymatic activities of alanine aminotransferase, aspartate aminotransferase, and alkaline phosphatase in preservation medium, compared to caffeine either during liquid-chilled storage or cryopreservation of spermatozoa. Conclusion: Melatonin and omega-3 are regarded efficient alternatives to caffeine when processing ram spermatozoa for application of artificial insemination or in vitro fertilization.

• 한국산학기술학회논문지
• /
• 제21권1호
• /
• pp.14-19
• /
• 2020

본 논문은 차등 위성항법 보정 시스템을 이용한 측위 오차 보정을 통해 소형 드론의 위치를 정밀하게 계측할 수 있는 시스템 구현에 대해 서술하고 있다. 본 시스템은 고정된 위치에 자리하는 기준국과 실시간으로 움직이는 이동국(드론)으로 이루어져 있다. 자체 기준국 위치 정보와 국가에서 제공하는 관측 정보를 함께 후처리하여 기준국의 정밀 좌표를 획득하는 과정에 대해 서술하고, 이동국을 정밀 추적하기 위한 차등 위성 항법 시스템의 하드웨어 및 소프트웨어 구성에 대해 설명한다. 기준국 및 이동국 구현에 있어 저가의 경량 위성 항법 수신기 및 오픈소스 소프트웨어 코드와 라이브러리를 활용하여 범용성과 경제성을 극대화 하였으며, 오차 보정 정보 송수신에는 비 면허 주파수 대역 무선통신인 지그비(Zigbee)를 사용하였다. 본 시스템을 이용하여 소형 드론 위치 추적 시험 결과, 평균 측위 오차가 0.8m 및 최대 측위 오차가 1.2m로, 단일 위성 항법 수신기를 사용했을 경우 대비 오차가 86% 개선됨을 확인할 수 있었다.