• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.2
• /
• pp.113.1-113.1
• /
• 2014

We propose a three-year Key Science Program (KSP) consisting of VLBI monitoring observations and single dish (SD) rapid response observations (RRO). The VLBI monitoring observations are comprised of ten 24-hr observations per year (every month) of about 30 gamma-ray brigt active galactic nuclei (AGNs) with Korea VLBI Network (KVN) at 22, 43, 86, and 129 GHz. The SD RROs may consist of twelve 7-hr observations per source (every week for 3 months after triggering) of gamma-ray flaring sources with two KVN SD telescopes at 22, 43, and 86 GHz in dual polarization. We expect one or two sources per year for the SD RROs. Gamma-ray flares of AGNs are known to be occured in innermost regions of relativistic jets which radiate in whole ranges of electromagnetic spectra due to synchrotron radiation, syschrotron self absorption, inverse-compton scttering, doppler boosting etc. Possible explanations of the gamma-ray flares in AGNs are a) shocks-in-jets propagating within jet flow and b) bending of the whole jets. For both cases, we should expect changes in polarization, luminosity, particle distribution, and structures of jets at mas-scale. The multifrequency simultaneous VLBI/SD observations with KVN are the best tool for detecting such changes correlated with gamma-ray flares. This KSP proposal aims to answer the fundamental questions about the basic nature of the flares of AGNs.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.2
• /
• pp.38.2-38.2
• /
• 2016

How dense cores and filaments in molecular clouds form is one of key questions in star formation. To challenge this issue we started to make a systematic mapping survey of nearby molecular clouds in various environments with TRAO 14m telescope equipped with 16 beam array, in high ($N_2H^+$, $HCO^+$ 1-0) and low ($C^{18}O$, $^{13}CO$ 1-0) density tracers (TRAO Multi-beam Legacy Survey of Nearby Filamentary Molecular Clouds, PI: C. W. Lee). We pursue to dynamically and chemically understand how filaments, dense cores, and stars form under different environments. We have performed On-The-Fly (OTF) mapping observations toward L1251, southern part of Perseus molecular cloud, and Serpens main molecular cloud from January to May, 2016. In total, ~3.5 square degree area map of $^{13}CO$ and $C^{18}O$ was simultaneously obtained with S/N of >10 in a velocity resolution of ~0.2 km/s. Dense core regions of ~1.7 square degree area where $C^{18}O$ 1-0 line is strongly detected were also mapped in $N_2H^+$ 1-0 and $HCO^+$ 1-0. The L1251 and Perseus MC are known to be low- to intermediate-mass star-forming clouds, while the Serpens MC is an active low-mass star-forming cloud. The observed molecular filaments will help to understand how the filaments, cores and eventually stars form in a low- and/or intermediate-mass star-forming environment. In this talk, I'll give a brief report on the observation and show preliminary results of Perseus MC.

• Journal of Family Resource Management and Policy Review
• /
• v.14 no.4
• /
• pp.193-212
• /
• 2010

The pre-elderly approaching old age in our society confront having a harsh economic status. The main purpose of this study was to explore the factors influencing the preparation of the pre-elderly for overcoming this status. In particular, it focused on financially stable pre-elderly persons. The data from the 2008 Chungcheongnam-do Welfare Plan for Five Years collected by the Chungnam Women's Policy Development Institute was used to analyze the research questions. The participants in this study included 735 persons (ages 55-64) living in Chungcheongnam-do. Five hundred and eighty-one self-reported questionnaires were used for the final analysis using SAS, version 9.1. This study attempted to identify the important variables needed to find the factors related to socio-demographic and economic characteristics, the adult-child relationship, the preparation plan for old age, etc. The results showed that job and health status were key to preparation for financial stability among the elderly. Another finding was the importance of concrete financial planning for the elderly; that is to say, the pre-elderly who made more concrete plans than indefinite ones were likely to belong to stable households. Another significant finding was that it is important to consider both objective and subjective factors for the financial preparation of the elderly. These results should serve as reference data for the future welfare policy for the elderly, because the financial independence of the elderly will be vital for a healthy relationship between new and old generations.

• 한국HCI학회:학술대회논문집
• /
• 2008.02b
• /
• pp.460-464
• /
• 2008

To improve and optimize user interfaces of the system, the accurate understanding of users' behavior is an essential prerequisite. Direct questions depend on user' s ambiguous memory and usability tests depend on the researchers' intention instead of users'. Furthermore, they do not provide with natural context of use. In this paper we described the work which examined users' behavior through log analysis in their own environment. 50 users were recruited by consumer segmentation and they were downloaded logging-software in their mobile phone. After two weeks, logged data were gathered and analyzed. The complementary methods such as a user diary and an interview were conducted. The result of the analysis showed the frequency of menu and key access, used time, data storage and several usage patterns. Also, it was found that users could be segmented into new groups by their usage patterns. The improvement of the mobile phone user interface was proposed based on the result of this study.

• Education of Primary School Mathematics
• /
• v.20 no.2
• /
• pp.177-192
• /
• 2017

In theory, mixed methods that incorporate both quantitative and qualitative approaches can maximize strengths of each method while minimize the short comings of each. Mixed methods research is a feature of educational research nowadays, and the number of studies applied mixed methods research has been gradually increasing. This study investigates how mixed methods research was applied in the field of mathematic education, especially focusing on how qualitative and quantitative methods are combined to best address their research questions. With this in mind, this study carefully selects and analyzes 4 research articles that used mixed methods and were published by Journal of Elementary Mathematics Education in Korea in 2015. This study provides detailed result of qualitative analysis on mixed methods research while other a few previous analysis on mixed methods research were tend to focusing on quantitative analysis, producing numeric quantitative information. The result of this study provides practical and in-depth analysis on how to improve validity and possibility of mixed methods research, addressing alternative ways to combine two different research methods and key elements to take into account.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.8 s.251
• /
• pp.931-940
• /
• 2006

Defect assessment of a weld zone is important in fitness-for-service evaluation of plant components. Typically a J and $C^*$ estimation method for a defective homogeneous component is extended to a mismatched component, by incorporating the effect due to the strength mismatch between the weld metal and the base material. The key element is a mismatch limit load. For instance, the R6/R5 procedure employs an equivalent material concept, defined by a mismatch limit load. A premise is that if a proper mismatch limit load solution is available, the same concept can be used for any defect location (either a weld centre defect or a heat affected zone (HAZ) defect) and for any material combination (either two-material or multi-material combinations; either similar or dissimilar joints). However, validation is still limited, and thus a more systematic investigation is needed to generalise the suggestion to any geometry, any defect location and any material combination. This paper describes the effect of structural geometry on the $C^*$ integral for defective similar welds, based on systematic elastic-creep 2-D and 3-D finite element (FE) analyses, to attempt to elucidate the questions given above. It is found that the existing 'equivalent material' concept is valid only for limited cases, although it provides conservative estimates of $C^*$ for most of cases. A modification to the existing equivalent material concept is suggested to improve accuracy.

• The Research Journal of the Costume Culture
• /
• v.26 no.4
• /
• pp.503-518
• /
• 2018

The purpose of this study is to illustrate the design of safety suits based on energy-harvesting technology, particularly targeting street cleaners who must work at night with high mobility. The design focuses on applying lightweight energy-harvesting tools and illuminant into the wear. The design development reflects feedback from testers collected via survey constituting a key methodology. The development process has two main stages. Each stage uses a process of design prototyping, internal examination, test sampling, test wearing, and wearers' feedback via survey that consists of questions on visibility, wearing convenience, and washability. The first stage results show the design of safety suits with energy-harvested LED illuminant inserted and the survey results collected from street cleaners dressed in 4 sample and 80 actual suits in total. Improved based on the first-stage survey results, the second stage designs the suits with detachable energy-harvested EL tape. From these 5 sample and 30 actual second-stage suits, the additional survey indicates that this second-stage design facilitates more visibility and convenience in washing and wearing than the first-stage design. Accordingly, one can expect that this new design can apply not only to safety suits for night workers but also to handicapped or outdoor sportswear applications in the future.

• STI Policy Review
• /
• v.4 no.2
• /
• pp.113-135
• /
• 2013

This paper explores how research excellence is perceived among researchers in Thailand and Japan with an aim to explore whether there are any new indicators that could later be proposed and adopted as criteria of excellence. Based on a questionnaire survey, the findings reflect ideas and viewpoints that could be found among researchers in both countries. Creative researchers are crucial to a strong national research and innovation system. Institutions should provide an environment or incentives based on research performance for their researchers to flourish and be productive. For decades, bibliometrics have been used to evaluate individual research performance for its easy approach and faster speed than a qualitative assessment would warrant. Nonetheless, there have been a number of studies on research performance evaluating systems that point out how a purely bibliometric approach is inadequate in summarizing the quality of the scientific performance. The pressures on researchers today influence their thinking and oppose their creativity. To investigate the perception of research excellence, three key research questions were set in this study: what counts as excellence, how to measure excellence, and how to support excellence. The findings confirm that traditional granting criteria that frames an idea of excellence remain valid, but they also suggest novel criteria be considered and prioritized. This paper argues that the existing evaluating system is insufficient for unleashing the curiosity and creativity of researchers and fostering excellence. In the final section, the paper discusses factors that contribute to scientific creativity that we should not overlook.

• Journal of the Korean Society of Physical Medicine
• /
• v.13 no.1
• /
• pp.11-26
• /
• 2018

PURPOSE: The aim of this study was to review the effects of exercise intervention on blood glucose control in obese type 2 diabetic patients. METHODS: The PubMed and KERISS search engines were used and 61 papers that met the key questions were selected. RESULTS: Exercise is an effective intervention for the control of blood glucose in type 2 diabetic patients because it does not impair glucose transport in the skeletal muscle induced by muscle contractions. Insulin resistance, which is characteristic of type 2 diabetes, is caused by decreased insulin sensitivity or insulin responsiveness. Acute exercise improves the glucose metabolism by increasing the insulin-independent signaling pathways and insulin sensitivity in the skeletal muscle, and regular long-term exercise improves the skeletal muscle insulin responsiveness and systemic glucose metabolism by increasing the mitochondrial and GLUT4 protein expression in the skeletal muscle. CONCLUSION: The improvement of the glucose metabolism through exercise shows a dose-response pattern, and if exercise consumes the same number of calories, high intensity exercise will be more effective for the glucose metabolism. On the other hand, it is practically difficult for a patient with obese type 2 diabetes to control their blood glucose with high intensity or long-term exercise. Therefore, it will be necessary to study safe adjuvants (cinnamic acid, lithium) that can produce similar effects to high-intensity and high-volume exercises in low-intensity and low-volume exercises.

• The Korean Journal of Applied Statistics
• /
• v.27 no.6
• /
• pp.867-889
• /
• 2014

Nonparametric Bayesian (np Bayes) statistical models are popularly used in a variety of research areas because of their flexibility and computational convenience. This paper reviews the np Bayes models focusing on biomedical research applications. We review key probability models for np Bayes inference while illustrating how each of the models is used to answer different types of research questions using biomedical examples. The examples are chosen to highlight the problems that are challenging for standard parametric inference but can be solved using nonparametric inference. We discuss np Bayes inference in four topics: (1) density estimation, (2) clustering, (3) random effects distribution, and (4) regression.