• 산업경영시스템학회지
• /
• 제44권1호
• /
• pp.17-25
• /
• 2021

Ammunition Demilitarization facility (ADF) should be set up the feasible goals and continue to operate, taking into account non-profit characteristics. However, due to the lack of performance measurement methods in ADF, which are essential to national policy at a significant cost each year, the reliability of the evaluation results can be insufficient. In this paper, the Balanced Score Card (BSC) method was applied that could be evaluated to reflect the financial and non-financial features. The relevant literature research and army regulations reflected the results of various interviews of the expert group. The extraction of success performance area in ADF was confirmed using the BSC method and the Decision Variable (DV) candidate was created to use regression for selecting the DV. Additionally, the key performance indicator was presented by verification the feasibility of content by conducting the survey of experts. The implications of this paper are as follows. First, the proposed BSC model was found to be suitable for practical use in ADF reflecting the non-profit characteristics. Second, accurate evaluation of ADF can contribute to long-term development of ADF. Finally, it can be applied to the management process of the other military sector, so it can be expected to play a role in providing basic data and spreading it to other areas.

• Wind and Structures
• /
• 제21권6호
• /
• pp.597-607
• /
• 2015

With an increasing demand of a renewable energy, new offshore wind turbine farms are being planned in some parts of the world. Foundation installation asks a significant cost of the total budget of offshore wind turbine (OWT) projects. Hence, a cost reduction from foundation parts is a key element when a cost-efficient designing of OWT budget. Mono-piles have been largely used, accounting about 78% of existing OWT foundations, because they are considered as a most economical alternative with a relatively shallow-water, less than 30 m of seawater depth. OWT design standards such as IEC, GL, DNV, API, and Eurocode are being developed in a form of reliability based limit state design method. In this paper, reliability analysis using the response surface method (RSM) and numerical simulation technique for an OWT mono-pile foundation were performed to investigate the sensitivities of mono-pile design parameters, and to find practical implications of RSM reliability analysis.

• Journal of Communications and Networks
• /
• 제13권6호
• /
• pp.664-677
• /
• 2011

In order to control interference and improve spectrum efficiency in the femtocell and macrocell overlaid system (FMOS), we propose a joint frequency bandwidth dynamic division, clustering and power control algorithm (JFCPA) for orthogonal-frequency-division-multiple access-based downlink FMOS. The overall system bandwidth is divided into three bands, and the macro-cellular coverage is divided into two areas according to the intensity of the interference from the macro base station to the femtocells, which are dynamically determined by using the JFCPA. A cluster is taken as the unit for frequency reuse among femtocells. We map the problem of clustering to the MAX k-CUT problem with the aim of eliminating the inter-femtocell collision interference, which is solved by a graph-based heuristic algorithm. Frequency bandwidth sharing or splitting between the femtocell tier and the macrocell tier is determined by a step-migration-algorithm-based power control. Simulations conducted to demonstrate the effectiveness of our proposed algorithm showed the frequency-reuse probability of the FMOS reuse band above 97.6% and at least 70% of the frequency bandwidth available for the macrocell tier, which means that the co-tier and the cross-tier interference were effectively controlled. Thus, high spectrum efficiency was achieved. The simulation results also clarified that the planning of frequency resource allocation in FMOS should take into account both the spatial density of femtocells and the interference suffered by them. Statistical results from our simulations also provide guidelines for actual FMOS planning.

• Mass Spectrometry Letters
• /
• 제1권1호
• /
• pp.25-28
• /
• 2010

The high-throughput identification and accurate quantification of proteins are essential strategies for exploring cellular functions and processes in quantitative proteomics. Stable isotope tagging is a key technique in quantitative proteomic research, accompanied by automated tandem mass spectrometry. For the differential proteome analysis of mouse neuronal cell lines, we used a multiplexed isobaric tagging method, in which a four-plex set of amine-reactive isobaric tags are available for peptide derivatization. Using the four-plex set of isobaric tag for relative and absolute quantitation (iTRAQ) reagents, we analyzed the differential proteome in several stroke time pathways (0, 4, and 8 h) after the mouse neuronal cells have been stressed using a glutamate oxidant. In order to obtain a list of the differentially expressed proteins, we selected those proteins which had apparently changed significantly during the stress test. With 95% of the peptides showing only a small variation in quantity before and after the test, we obtained a list of eight up-regulated and four down-regulated proteins for the stroke time pathways. To validate the iTRAQ approach, we studied the use of oxidant stresses for mouse neuronal cell samples that have shown differential proteome in several stroke time pathways (0, 4, and 8 h). Results suggest that histone H1 might be the key protein in the oxidative injury caused by glutamate-induced cytotoxicity in HT22 cells.

• Journal of Mechanical Science and Technology
• /
• 제20권4호
• /
• pp.482-493
• /
• 2006

The carbody structure of a high speed train passing through a tunnel is subjected to pressure fluctuation. Fatigue strength of the carbody structure against the fluctuating pressure loading should be proved in the design stage for safety. In this study, to get the useful information on the pressure fluctuation in the tunnel, measurement has been conducted during test running of KHST on the high speed line for two years. The measured results were analyzed and arranged to be used for carbody design. A prediction method for the magnitude and frequency of pressure change was proposed and the propagating characteristics of pressure wave was investigated. By statistical analysis for the measured results, a pressure loading spectrum for the high speed train was given. The proposed method can also be used to estimate the pressure loading spectrum for new high speed line at design stage combined with the results of train performance simulation.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2019년도 추계학술대회
• /
• pp.230-232
• /
• 2019

There is an accelerating need for ocean sensing where autonomous vehicles can play a key role in assisting engineers, researcher and scientists with environmental monitoring and collecting oceanographic data. This paper is performed to develops an autonomous sailing drone to be used as a sensor carrying platform for autonomous data acquisition at Sea. From a sailing drone design viewpoint, it is important to establish reliable prediction methods for sailing drone's resistance. The required power for the propulsion unit depends on the ship resistance and speed. There are three solutions for the prediction of ship resistance as follow analytical methods, model tests in tanks and Computational Fluid Dynamics (CFD). The present paper aims at simulating sailing drone friction resistance using numerical method. The dynamic mesh motion is used to describe the sailing drone movement.

• 인터넷정보학회논문지
• /
• 제20권3호
• /
• pp.25-31
• /
• 2019

Along with the recent advances in quantum computers, it is anticipated that cryptographic attacks using them will make it insecure to use existing public key algorithms such as RSA and ECC. Currently, a lot of researches are underway to replace them by devising PQC (Post Quantum Cryptography) schemes. In this paper, we propose a performance enhancement method for Lizard implementation which is one of NIST PQC standardization submission. The proposed method is able to improve the performance by 7 ~ 25% for its algorithms compared to the implementation in the submission through the techniques of various implementation aspects. This study hopes that Lizard will become more competitive as a candidate for PQC standardization.

• 대한치과교정학회지
• /
• 제50권2호
• /
• pp.86-97
• /
• 2020

Objective: To propose a three-dimensional (3D) method for evaluating temporomandibular joint (TMJ) changes during Twin-block treatment. Methods: Seventeen patients with Class II division 1 malocclusion treated using Twin-block and nine untreated patients with a similar malocclusion were included in this research. We collected their cone beam computed tomography (CBCT) data from before and 8 months after treatment. Segmentations were constructed using ITK-SNAP. Condylar volume and superficial area were measured using 3D Slicer. The 3D landmarks were identified on CBCT images by using Dolphin software to assess the condylar positional relationship. 3D models of the mandible and glenoid fossa of the patients were constructed and registered via voxel-based superimposition using 3D Slicer. Thereafter, skeletal changes could be visualized using 3DMeshMetric in any direction of the superimposition on a color-coded map. All the superimpositions were measured using the same scale on the distance color-coded map, in which red color represents overgrowth and blue color represents resorption. Results: Significant differences were observed in condylar volume, superficial area, and condylar position in both groups after 8 months. Compared with the control group (CG), the Twin-block group exhibited more obvious condyle-fossa modifications and joint positional changes. Moreover, on the color-coded map, more obvious condyle-fossa modifications could be observed in the posterior and superior directions in the Twin-block group than in the CG. Conclusions: We successfully established a 3D method for measuring and evaluating TMJ changes caused by Twin-block treatment. The treatment produced a larger condylar size and caused condylar positional changes.

• 국제초고층학회논문집
• /
• 제3권4호
• /
• pp.243-254
• /
• 2014

In this study, a demolition analysis code using the adaptively shifted integration (ASI)-Gauss technique, which describes structural member fracture by shifting the numerical integration point to an appropriate position and simultaneously releasing the sectional forces in the element, is developed. The code was verified and validated by comparing the predicted results with those of several experiments. A demolition planning tool utilizing the concept of a key element index, which explicitly indicates the contribution of each structural column to the vertical load capacity of the structure, is also develped. Two methods of selecting specific columns to efficiently demolish the whole structure are demonstrated: selecting the columns from the largest index value and from the smallest index value. The demolition results are confirmed numerically by conducting collapse analyses using the ASI-Gauss technique. The numerical results suggest that to achieve a successful demolition, a group of columns with the largest key element index values should be selected when explosives are ignited in a simultaneous blast, whereas those with the smallest should be selected when explosives are ignited in a sequence, with a final blast set on a column with large index value.

• 한국환경복원기술학회지
• /
• 제23권1호
• /
• pp.37-48
• /
• 2020

This study was aimed to design core areas applied by the global conservation criteria to promote the public awareness to the protected areas and the value cognition of the Key Biodiversity Areas (KBAs), targeting the Mt Seorak, according to the designation of globally important biodiversity areas. As a method for carrying out this study, the biota were cataloged through literature reviews and field trips. With applied by the Global Red List criteria of the International Union for Conservation of Nature (IUCN), only nine species were categorized in the studied area; plants were classified into six species as follows: Megaleranthis saniculifolia ohwi, Bupleurum euphorbioides Nakai, Hanabusaya asiatica Nakai, Thuja koraiensis Nakai, Leontopodium leiolepis Nakai, Androsace cortusaefolia Nakai, fish was classified one species as follow: Pungitius sinensis Tanaka, and the mammal was classified as two species as follows: Hydropotes inermis, Naemorhedus caudatus. According to the occupation area (EoO, Extent of Occurrence) and Minimum Viable Population(MVP), the size of protected area was 234.56㎢ for plants, 235.07㎢ for mammals, and 0.14㎢ for fish, and the Key Biodiversity Area (KBA) of Mt. Seolak suggested as 286.72㎢.