• Wind and Structures
• /
• v.21 no.2
• /
• pp.183-202
• /
• 2015

Experiments on two-dimensional rectangular prisms with various side ratios (B/D=2, 3, and 4, where B is the along-wind dimension, and D is the across-wind dimension) and rounded corners (R/D=0%, 5%, 10%, and 15%, where R is the corner radius) are reported in this study. The tests were conducted in low-turbulence uniform flow to measure the wind pressures on the surfaces of 12 models for Reynolds numbers ranging from $1.1{\times}10^5$ to $6.8{\times}10^5$. The aerodynamic force coefficients were obtained by integrating the wind pressure coefficients around the model surface. Experimental results of wind pressure distributions, aerodynamic force coefficients, and Strouhal numbers are presented for the 12 models. The mechanisms of the Reynolds number effects are revealed by analyzing the variations of wind pressure distributions. The sensitivity of aerodynamic behavior to the Reynolds number increases with increasing side ratio or rounded corner ratio for rectangular prisms. In addition, the variations of the mean pressure distributions and the pressure correlations on the side surfaces of rectangular prisms with the rounded corner ratio are analyzed at $Re=3.4{\times}10^5$.

• Journal of the Korean Mathematical Society
• /
• v.55 no.6
• /
• pp.1359-1380
• /
• 2018

In this paper, we prove that if a metric measure space satisfies the volume doubling condition and the Hardy type inequality with the same exponent n ($n{\geq}3$), then it has exactly the n-dimensional volume growth. Besides, three interesting applications of this fact have also been given. The first one is that we prove that complete noncompact smooth metric measure space with non-negative weighted Ricci curvature on which the Hardy type inequality holds with the best constant are isometric to the Euclidean space with the same dimension. The second one is that we show that if a complete n-dimensional Finsler manifold of nonnegative n-Ricci curvature satisfies the Hardy type inequality with the best constant, then its flag curvature is identically zero. The last one is an interesting rigidity result, that is, we prove that if a complete n-dimensional Berwald space of non-negative n-Ricci curvature satisfies the Hardy type inequality with the best constant, then it is isometric to the Minkowski space of dimension n.

• Wind and Structures
• /
• v.22 no.5
• /
• pp.573-594
• /
• 2016

Simultaneous pressure measurements on 2D square prisms with various corner modifications were performed in uniform flow with low turbulence level, and the testing Reynolds numbers varied from $1.0{\times}10^5$ to $4.8{\times}10^5$. Experimental models were a square prism, three chamfered-corner square prisms (B/D=5%, 10%, and 15%, where B is the chamfered corner dimension and D is the cross-sectional dimension), and six rounded-corner square prisms (R/D =5%, 10%, 15%, 20%, 30%, and 40%, where R is the corner radius). Experimental results of drag coefficients, wind pressure distributions, power spectra of aerodynamic force coefficients, and Strouhal numbers are presented. Ten models are divided into various categories according to the variations of mean drag coefficients with Reynolds number. The mean drag coefficients of models with $B/D{\leq}15%$ and $R/D{\leq}15%$ are unaffected by the Reynolds number. On the contrary, the mean drag coefficients of models with R/D=20%, 30%, and 40% are obviously dependent on Reynolds number. Wind pressure distributions around each model are analyzed according to the categorized results.The influence mechanisms of corner modifications on the aerodynamic characteristics of the square prism are revealed from the perspective of flow around the model, which can be obtained by analyzing the local pressures acting on the model surface.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.6
• /
• pp.518-524
• /
• 2018

The cover song refers to live recordings or reproduced albums. This paper studies two-dimensional Fourier transform as a feature-dimension reduction method to search cover song fast. The two-dimensional Fourier transform is conducive in feature-dimension reduction for cover song search due to musical-key invariance. This paper extends the previous work, which only utilize the magnitude of the Fourier transform, by introducing an invariant from phase based on the assumption that adjacent frames have the same musical-key change. We compare the cover song retrieval accuracy of the Fourier-transform based methods over two datasets. The experimental results show that the addition of the invariant from phase improves the cover song retrieval accuracy over the previous magnitude-only method.

• International Journal of High-Rise Buildings
• /
• v.9 no.4
• /
• pp.307-314
• /
• 2020

High-rise buildings with vertical setback are widely used in practice. From the field investigation of the past earthquakes, it was found that such kind of vertically irregular high-rise building structures easily suffer severe damage during strong earthquakes. This paper presents an extensive study on the earthquake responses of moment-resisting frame structures (MFS) popularly applied in high-rise buildings with vertical setback. Four groups of MFS are designed, including three groups of structures with vertical setback and one group of structures with the lateral stiffness varying along the building height but without vertical setback. The numerical models of the structures are established, and the time history analysis of the structures under different levels of earthquakes is conducted. The earthquake responses of the structures are compared. The influence of the ratio between the horizontal setback dimension and the previous plan dimension, the eccentricity of setback, and the position where the setback occurs on the seismic performance of structures is studied. The rationality of the provisions for the structures with vertical setback specified in the current design codes is checked by the findings from this study.

• Fashion & Textile Research Journal
• /
• v.11 no.2
• /
• pp.286-292
• /
• 2009

The purpose of this study is to analyze the pattern of the present flight suit, to select variables of human body and key dimensions for making pattern of the flight suit, and to decide the most appropriate size of human body and rate of ease for designing an overall flight suit. For analyzing the pattern of flight suit, we used "M95Special" (men ; chest circumference 92-97 cm ; height : above 177 cm), which was indicated as the standard of the Ministry of National Defense. We analyzed general appearance and the actual dimensions of the pattern of the flight suit. As a result of analyzing the pattern, flight suit was front-opened overall style which had a flat collar with rounded edges, two-pieced sleeves with lower height of the sleeve's cap, 3cm-width belt on the waist and 8 pockets. To decide the most appropriate size of human body, we selected 20 variables of human body in the 359 variables of the Size Korea by referring the previous studies. The 20 variables of human body were 9 circumferences (chest, waist, hip, neck, armscye, wrist, thigh, knee, and ankle), 9 lengths (stature, back interscye fold, waist back, crotch height, crotch, body rise, arm, outside leg and total), and 2 breadths (biacromial and chest). We drew out the size of 20 variables from the Size Korea and US Army anthropometry data and decided the most appropriate values from the drawn data for applying to the pattern of flight suit.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.14 no.1
• /
• pp.24-31
• /
• 2018

The mechanical design procedure is studied for the PCHE(printed circuit heat exchanger) with electrochemical etched flow channels. The effective heat transfer plates of PCHE are assembled by diffusion bonding to make a module. PCHE is widely used for industrial applications due to its compactness, cost efficiency, and serviceability at high pressure and/or temperature conditions. The limitations and technical barriers of PCHE are investigated for application to nuclear components. Rules for design and fabrication of PCHE are specified in ASME Section VIII but not in ASME Section III of nuclear components. Therefore, the calculation procedure of key dimensions of PCHE is defined based on ASME section VIII. The effective heat transfer region of PCHE is defined by several key dimensions such as the flow channel radius, edge width, wall thickness, and ridge width. The mechanical design procedure of key dimensions was incorporated into a program for easy use in the PCHE design. The effect of assumptions used in the key dimension calculation on stress values is numerically investigated. A comparative analysis is done by comparing finite element analysis results for the semi-circular flow channels with the formula based sizing calculation assuming rectangular cross sections.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.6
• /
• pp.700-711
• /
• 2011

The purposes of the study were to identify the online service attributes that contribute to online consumer experiences of satisfaction, service failure, and service recovery and to examine whether differences exist in these attributes between U.S. and Korea. E-A-S-QUAL provided a useful framework for the study. Focus group interviews and web surveys were conducted by utilizing college students in both countries. No significant cultural differences were found in online service dimensions of service satisfaction. Personalization was the most frequently mentioned online service dimension of service satisfaction both in the U.S. and Korea. The findings showed significant cultural differences in terms of online service dimensions responsible for service failure and recovery. For Korean consumers, merchandising was one of the key online service dimensions of service failure, while efficiency was the important service dimension resulting in service failure for the U.S. consumers. In addition, for U.S. consumers, efficiency and personalization were the two most frequently mentioned service dimension for service recovery, while Korean consumers put more importance on the contact and information dimensions for service recovery. This study provided a comprehensive list of online service attributes important to online apparel retailing.

• Korean Journal of Adult Nursing
• /
• v.20 no.2
• /
• pp.280-295
• /
• 2008

Purpose: This ethnography in communication aimed to explore the changes in consciousness on time and temporality as an elderly became older. This study focused on time as a primary message systems of Edward Hall. Methods: The assumption of the study was that the aging body as an expression of biological time is a meta of physical, personal, and social time. Data were collected from iterative fieldwork in a clan between Jan, 1990 and April, 2007. The key informants were 13 women and men aged 70 years old or more at the beginning of study. Changes in physical time and temporality as the women's body declined in its physical function was analyzed. As the cultural context, informants' every life and the history of the clan were also analyzed. Results: The meta-time of the informants were constituted as follows: In the low-contextual dimension, physical time perceived as longer and personal time perceived as shorter than they were young; In high-contextual dimension, informant and residents had a polychronic perspective and aged-centered time perspectives.; In the supernatural dimension of time, sacred time were reinforced by rituals. Informants extended temporality to their springs' world and ancestors' world. Conclusion: As the informants recognized slugged body movements and time-limited present life, their views on their life world towards the future of spring and of the sacred world of ancestors. Thereby, their identity as a member of a clan was reinforced. This result informed us on what we should focus on when caring with older women.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.3
• /
• pp.417-427
• /
• 1998

Price, one of the marketing 4p's, is a key decision variable affecting market share and the profitability of individual products. For consumers, since price is almost always known to and can be compared, it is one of the most important criteria when they make a purchase decision making. With the consumers' increasing consciousness for price due to economic recession, and the saturation of domestic apparel market, it is expected that the effect of price on consumers' decision making would be greater than ever. This study, the first in two part series, focuses on testing the validity of dimensions of clothing price using Lichtenstein et. at. (1993)'s suggestion. In addition, the effect of demographic variables on the perception of each price dimension was investigated. The subjects were 264 college students living in Seoul, Korea. The data were collected by self -administered questionnaires and analyzed by t-test, ANOVA, regression analysis and Lisrel confirmatory factor analysis. The result supported Lichtenstein et. al. (1993)'s suggestion. That is, consumers' perception of clothing price is not mini-dimensional, but has six dimensions: sale proneness, price mavenism, value consciousness, price consciousness, price -quality schema and prestige sensitivity. Demographic variables partially effect on the consumers' perception of each clothing price dimension. The level of monthly pocket money, however, has influence on all price dimensions. Based on these results, marketing implications for apparel manufacturers were suggested.