• Herbal Formula Science
• /
• v.17 no.2
• /
• pp.21-38
• /
• 2009

This report describes 86 prescriptions related to the use of Herba Schizonepetae main blended from Dongeuibogam. The following conclusions were drawn through investigations on the prescriptions that use Herba Schizonepetae as a key component. Prescriptions that Herba Schizonepetae was taken as a monarch drug are utilized for22 therapeutic purposes, for example, eye disease, abscess disease, head and tooth, and woman disease. In particular, 16.3% of prescriptions appear in the chapter of eye. Prescriptions that utilize Herba Schizonepetae as the main component are used in the treatment of eye, abscess and woman disease, head disease, tooth disease and they are also used for treating 56 different types of disease. Herba Schizonepetae is used in pathogenic factors such as wind and used in pathology related to the liver and stomach system. The dosage of Herba Schizonepetae is 1pun 3li(about 0.49g) to 4don(about 14g), however 5pun 3li(about 1.99g)~1don(about 3.75g) has been taken the most for clinical application. Bangpungtang and Saenglyosamultang are the most useful base prescriptions which use the Herba Schizonepetae as the main ingredient.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.6
• /
• pp.1085-1091
• /
• 2002

General vehicle is evaluated by its acceleration, fuel economy, NVH (Noise, Vibration and Harshness) and subjective (such as launching feel) performance. The first step to enhance its performance is to know how much each component affects on the vehicle performance. It is very important to know what is the key factor of the component among many specifications. Hydraulic torque converter can be expressed by means of its performance curve (torque ratio and capacity factor). In this paper, the key factor of torque converter, which affect vehicle performance, are explored by using Taguchi method. Moreover, general sensitivity analysis method is compared with Taguchi's experiment.

• Journal of Internet Computing and Services
• /
• v.6 no.3
• /
• pp.31-43
• /
• 2005

OTAR system is a highly authentic key management system that has functions with access control. data integrity and data confidentiality, In this paper, we analyze the existing TIA/EIA Over-The-Air-Rekeying key managements protocol. focused to symmetric ciphers. It can be used to understand the technical trend on technologies about TIA/EIA OTAR standardization. This results can be used to evaluate security properties of a remote rekeying, The proposed system contains a highly reliable system synchronization.

• Vacuum Magazine
• /
• v.1 no.2
• /
• pp.24-29
• /
• 2014

Display is a key component in electronic devices. OLED is growing very fast recently due to the explosion of the smart phone market although still LCD is the dominating display technology in the display market at the moment. Also needs for the large area and high resolution TVs and flexible displays are increasing these days. Especially flexible display is expected to be one of the key technologies in mobile devices requiring small device size and large display size. Contrary to the conventional displays, flexible display requires organic materials for the substrate, the active driving element and also for the display element. Plastic film as a substrate, organic semiconductor as an active component of the transistor and organic light emitting materials or electronic paper as a display element are studied actively. In this article, mainly backplane technologies such as substrates and the transistor materials for flexible display will be introduced.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.558-564
• /
• 2001

General vehicle is evaluated by its acceleration, fuel economy, NVH (Noise, Vibration and Harshness) and subjective (Launching feel) performance. The first step to enhance its performance is to know how much each component affects on the vehicle performance. It is very important to know what is the key factor of the component among many specifications. Hydraulic torque converter can be expressed by means of its performance curve (torque ratio and capacity factor). In this paper, the key factor of torque converter, which affect vehicle performance, are explored by using Taguchi method.

• International Journal of High-Rise Buildings
• /
• v.10 no.3
• /
• pp.211-218
• /
• 2021

A new type of earthquake resilient reinforced concrete (RC) shear wall structure, installed with replaceable coupling beams and replaceable corner components at the bottom of wall piers, is proposed in this study. At first, the mechanical behavior of replaceable components, such as combined dampers and replaceable corner component, is studied by cyclic loading tests on them. Then, cycling loading tests are conducted on one conventional coupled shear wall and one new type of coupled shear wall with replaceable components. The test results indicate that the damage of the new type of coupled shear wall concentrates on replaceable components and the left parts are well protected. Finally, a case study is introduced. The responses of one conventional frame-tube structure and one new type of structure installed with replaceable components under the wind and the earthquake are compared, which verify that the performance of new type of structure is much better than the conventional structure.

• Polymer(Korea)
• /
• v.38 no.5
• /
• pp.613-619
• /
• 2014

The polypropylene/polyamide elastomer (PP/PAE) blends were prepared by melt mixing. PP and PAE in PP/ PAE were immiscible completely. The size of PAE domains was large and the clear gap in the interface between PP and PAE existed, which did not meet the conditions enhancing toughness of polymers by elastomer. Therefore, maleic anhydride grafted polypropylene (MP) was used to improve the miscibility between PP and PAE. The miscibility between PP and PAE was improved and the size of dispersed phase PAE decreased by introducing MP. The crystallization of PP became easier by introducing PAE as a nucleating agent. With the increase of PAE content, the melt-crystallization temperatures of PP components in PP/PAE/MP blends increased gradually. The melt-crystallization of the polytetramethylene oxide segment of PAE component in PP/PAE blends were hampered by PP component. In addition, PAE can enhance significantly the toughness of PP, and the tensile strength and modulus did not decrease.

• ETRI Journal
• /
• v.42 no.2
• /
• pp.258-271
• /
• 2020

A correlation exists between luminance samples and chrominance samples of a color image. It is beneficial to exploit such interchannel redundancy for color image compression. We propose an algorithm that predicts chrominance components Cb and Cr from the luminance component Y. The prediction model is trained by supervised learning with Laplacian-regularized least squares to minimize the total prediction error. Kernel principal component analysis mapping, which reduces computational complexity, is implemented on the same point set at both the encoder and decoder to ensure that predictions are identical at both the ends without signaling extra location information. In addition, chrominance subsampling and entropy coding for model parameters are adopted to further reduce the bit rate. Finally, luminance information and model parameters are stored for image reconstruction. Experimental results show the performance superiority of the proposed algorithm over its predecessor and JPEG, and even over JPEG-XR. The compensation version with the chrominance difference of the proposed algorithm performs close to and even better than JPEG2000 in some cases.

• The KIPS Transactions:PartD
• /
• v.11D no.4
• /
• pp.929-936
• /
• 2004

A major limitation of available component-based platforms Is that they do not provide suitable means for describing and reasoning on the concurrent behaviour of interacting component-based system. Indeed while these platforms provide convenient ways to describe the typed signatures of components, e.g. like CORBA's IDL, they offer a quite low-level support to describe the concurrent behaviour of component. The ability to describe and verify the concurrent behaviour of interacting components is key aspect In the development of large component-based software system. This study propose a component interface specification using process algebra and configuration's role which allows one to prove correctness of software architecture generated at design level as well as to define compatibility relations by our evolution rule and $\pi$-graph. Also, we shown on an appropriateness of a specification techniques and definitions proposed in this paper by case-study.

• Carbon letters
• /
• v.13 no.3
• /
• pp.182-186
• /
• 2012

A new model and resultant equation for the coagulation of acrylonitrile monomers in precipitation polymerization are suggested in consideration of the surface tension (${\gamma}$) and cohesive energy density ($E_{CED}$). The equation was proven to be quite favorable by considering figure fittings from known surface tensions and cohesive energy densities of certain organic solvents. The relationship between scale value of surface tension (${\gamma}$/M) and cohesive energy density of monomers can be obtained by changing the coagulation bath component for effective precipitation polymerization of acrylonitrile in wet spinning.