• Asian-Australasian Journal of Animal Sciences
• /
• 제28권7호
• /
• pp.1020-1027
• /
• 2015

The combined effect of tumbling marination methods (vacuum continuous tumbling marination, CT; vacuum intermittent tumbling marination, IT) and effective tumbling time (4, 6, 8, and 10 h) on the water status and protein properties of prepared pork chops was investigated. Results showed that regardless of tumbling time, CT method significantly decreased the muscle fiber diameter (MD) and significantly increased the total moisture content, product yield, salt soluble proteins (SSP) solubility, immobilized water component (p<0.05) compared with IT method. With the effective tumbling time increased from 4 h to 10 h, the fat content and the MD were significantly decreased (p<0.05), whereas the SSP solubility of prepared pork chops increased firstly and then decreased. Besides, an interactive effect between CT method and effective tumbling time was also observed for the chemical composition and proportion of immobilized water (p<0.05). These results demonstrated that CT method of 8 h was the most beneficial for improving the muscle structure and water distribution status, increasing the water-binding capacity and accelerating the marinade efficiency of pork chops; and thus, it should be chosen as the most optimal treatment method for the processing production of prepared pork chops.

• Asian-Australasian Journal of Animal Sciences
• /
• 제33권5호
• /
• pp.812-824
• /
• 2020

Objective: The aim of this work was to assess the effect of fermented blueberry (FB; 2%, 4%, and 6%) on the oxidative stability and volatile molecule profiles of emulsion-type sausage stored at 4℃ for 28 days. Methods: The antioxidant activity of FB was determined through radical-scavenging activity against 2, 2-diphenyl-1-picrylhydrazyl (DPPH) and hydroxyl radicals. Four formulations of sausage treatments with different FB levels (0%, 2%, 4%, 6%) were prepared, then peroxide value (POVs), thiobarbituric acid-reactive substances (TBARS) values, protein carbonyls and thiol groups were measured. The aroma profiles of sausages for each treatment was also determined. Results: The half maximal inhibitory concentration indicated that FB had greater scavenging ability than ascorbic acid against DPPH and hydroxyl radicals. Sausages with FB significantly retarded increases in POVs and TBARS, as well as in the content of protein carbonyls during all storage days (p<0.05). Particularly, 4% and 6% FB-treated sausages had better oxidation inhibition effects. However, FB accelerated the reduction in thiol groups (p<0.05). Additionally, FB inhibits the excessive formation of aldehyde compounds; for example, hexanal, which may cause rancid flavors, decreased from 58.25% to 19.41%. FB also created 6 alcohols (i.e., 2-methyl-1-propanol, 3-methyl-1-butanol, and phenylethyl alcohol), 5 ester compounds (i.e., ethyl acetate, ethyl lactate, and ethyl hexanoate) and 3-hydroxy-2-butanone in the sausages that contribute to sausage flavors. The principal component analysis showed that the aroma profiles of sausages with and without FB are easily identified. Conclusion: The addition of FB could significantly reduce the lipid and protein oxidation and improve oxidative stability for storage. Also, adding FB could inhibit rancid flavors and contribute to sausage flavors.

• 한국컴퓨터산업학회논문지
• /
• 제3권3호
• /
• pp.383-390
• /
• 2002

컴포넌트에 의한 시스템 구축은 기능 중심의 독립적인 컴포넌트를 기반으로 새로운 소프트웨어를 구축한다. 컴포넌트를 중심으로 한 소프트웨어의 개발은 품질향상, 마른 개발과 유지보수의 효율성과 같은 소프트웨어의 재사용에 의해서 얻을 수 있는 이익을 얻을 수 있다. 컴포넌트 기반의 시스템에서 재사용성을 높일 수 있는 고 품질 컴포넌트의 효율적인 식별과 구축은 가장 중요한 목표이자 성공 요소이다. 따라서 컴포넌트 개발자는 현재 각 컴포넌트 개발 방법론들의 컴포넌트 식별에 대한 장점과 단점을 파악하여 개발하고자 하는 시스템에 적합한 방법론을 선택하는 것이 필요하고 또한 여러 방법론의 단점을 보완하여 독립적인 컴포넌트를 효율적으로 식별할 수 있는 새로운 방법론을 개발하는 것이 필요하다. 그러기 위해서는 다양한 방법론에 대한 비교 분석이 절실히 요청된다. 본 논문은 최근에 산업계에서 널리 쓰이고 있는 대표적인 컴포넌트 기반 소프트웨어 개발 방법론인 Rational사의 RUP(Rational Unified Process)［1,9］, Computer Associates사의 CBD96［2,3］과, Compuware사의 UNIFACE［5］ 그리고 Cheesman과 Daniels가 CBD96의 컴포넌트 개발 방법을 화장하여 제안한 UML Components 방법론［4］ 등의 컴포넌트 식별 방법을 설명하고 그들의 문제점을 기술한다. 그리고 컴포넌트 식별 방법들을 총체적인 측면에서 비교 분석한다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제48권7호
• /
• pp.363-368
• /
• 1999

The parallel operation system of multiple uninterruptible power supplies(UPSs) is used to increase power capacity of the system or to secure higher reliability at critical loads. In the parallel operation of the two UPSs, the load-sharing control to maintain the current balance between them is a key technique. Because a UPS has low output impedance and quick response characteristics, in case of an unbalanced load inverter output current changes very rapidly and thereby can instantaneously reach an overload condition. In this study, high precise load-sharing controller is proposed and implemented for the parallel operation system of two UPSs with low impedance characteristics and this controller controls the frequency and the voltage to minimize the active power component and the reactive power component which are gotten from the current difference between two UPSs. And then a good performance of the proposed method is verified by experiments in the parallel operation system with two 40KVA UPSs.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.903-908
• /
• 2007

A retractor is the major component of a seatbelt system that restraints passengers by locking the movement of webbing. Recently, in order to increase the effectiveness of seatbelt systems, motorized retractors that remove slack and correct passenger posture just before airbag expansion when collision is predicted are widely used. Key component of motorized retractors is the one-way clutch that engages and disengages the winding action of webbing according to the direction of motor revolution. Analytical investigation of action of the one-way clutch mechanism has been carried out to figure out conditions for one-way locking, and to study the effect of various kinematic and dynamic design variables of one-way clutch. Using combination of ADAMS and LifeMOD soft-wares, dynamic simulation of operation of motorized retractors including Hybrid-III dummy model has been carried out to evaluate the performance of the motorized retractors in various crash scenarios.

• 한국미생물·생명공학회지
• /
• 제23권1호
• /
• pp.12-16
• /
• 1995

Medium components for lactic acid production were optimized with a strain of Lactobacillus sp., isolated by our Lab. Nitrogen source was the key component and manganese ion was also important for lactic acid production in this strain. Optimal concentration of manganese ion was 0.03 g/l as MnSO$_{4}$ 4 - 5 H$_{2}$O base. Other mineral elements, however, had little effect on it. Among the nitrogen sources we examined, yeast extract showed the highest productivity. Yeast extract, the exellent but very expensive medium component, could be partially replaced by soytone until 60% dry base with higher productivity, or by tryptone enforced with vitamines and nucleic acids. In order to replace yeast extract completely, we examined several inexpensive nitrogen sources and their enzymatic hydrolyzates. The hydrolyzate of vital wheat gluten was the best of them.

• 한국초전도ㆍ저온공학회논문지
• /
• 제19권2호
• /
• pp.1-8
• /
• 2017

Recently, Research and development activity of HTS (High Temperature Superconducting) power application is very progressive worldwide. Especially, HTS cable system and HTSFCL (HTS Fault current limiter) system are proceeding to practical stages. In such system and equipment, cryogenic cooling system, which makes HTS equipment cooled lower than critical temperature, is one of crucial components. In this article, cryogenic cooling system for HTS application, mainly cable, is reviewed. Cryogenic cooling system can be categorized into conduction cooling system and immersion cooling system. In practical HTS power application area, immersion cooling system with sub-cooled liquid nitrogen is preferred. The immersion cooling system is besides grouped into open cycle system and closed cycle system. Turbo-Brayton refrigerator is a key component for closed cycle system. Those two cooling systems are focused in this article. And, each design and component of the cooling system is explained.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1995년도 추계학술대회논문집
• /
• pp.119-127
• /
• 1995

A process sequence in precison press forming of electronic components is investigated by the finite element method. Aperture, a key component of electronic gun, is formed through a wequence of about 15 operations, among which the beading & bending, the first coining, and the second coining operations are expected to be most critical in view of industrial experts' opinions. Thus, the analysis performed by a commercial code MARC focuses on the three operations, and comparisons are made between the results of the analysis and the measurement of experimental forming of the component, and it appears a sound agreement.

• Computers and Concrete
• /
• 제20권1호
• /
• pp.23-29
• /
• 2017

In this study engineered steel fibres used as reinforcement for concrete were characterized by number of key mechanical and spatial parameters, which are easy to measure and quantify. Such commonly used parameters as length, diameter, fibre intrinsic efficiency ratio (FIER), hook geometry, tensile strength and ductility were considered. Effective classification of various fibres was demonstrated using simple multivariate computations involving principal component analysis (PCA). Contrary to univariate data mining approach, the proposed analysis can be efficiently adapted for fast, robust and direct classification of engineered steel fibres. The results have revealed that in case of particular spatial/geometrical conditions of steel fibres investigated the FIER parameter can be efficiently replaced by a simple aspect ratio. There is also a need of finding new parameters describing properties of steel fibre more precisely.

• 품질경영학회지
• /
• 제4권1호
• /
• pp.20-24
• /
• 1976

The higher develops the industrial techniques, the more reliability of mac hi nary, equipments and systems want the consumers. So, it is a key to succeed in the new-product development that the consumers can put reliance on the product to be made in the product design stage. This study intends to help the product designer and the system manager by presenting them better reliability prediction techniques. For this purpose, the author built some fundamental reliability system models. And then predict the system reliability by estimating the elemental component's failure rate ${\lambda}_i$, and proposed an evaluation model. And also, a system is wrong according to the component's characteristics' degradation, we must estimate the degradation failure rate (average and standard deviation). For this, the "Moment method" is used.