• 한국작물학회지
• /
• 제64권2호
• /
• pp.102-108
• /
• 2019

본 연구는 식용옥수수 풋이삭의 식감의 결정에 영향을 미치는 과피의 두께를 측정하는 방법을 규명하기 위하여 과피 시료의 준비 방법에 따른 과피 두께의 차이와 등숙 시기별 과피 두께의 변화를 조사하기 위하여 수행하였다. 1. 찰옥수수와 초당옥수수 각 3품종의 시료를 수확 직후 생옥수수(생시료) 알곡을 바로 측정하거나 상온의 음지에서 완전(건조시료) 건조시키거나 $-4^{\circ}C$로 냉동시킨 후 과피를 측정하였다. 2. 시료 준비 방법과 등숙 시기에 따른 삼원 교호작용의 유의성이 인정되어 어느 한 요인에 대한 일반적인 결론을 도출하기 보다는 각 시료 준비 방법과 특정 등숙 시기에 따른 과피 두께의 비교를 수행하였다. 3. 초당옥수수는 건조시료에서 등숙이 진행됨에 따라 비교적 안정된 과피 두께 측정값을 얻을 수 있었으며 찰옥수수는 비해 모든 시료 준비 방법에서 초당옥수수보다 안정된 값을 보였다. 특히 풋찰옥수수 수확 적기인 수정 후 24일경에는 시료 준비 방법에 따른 차이는 크게 나타나지 않을 것으로 기대된다.

• 한국분말재료학회지
• /
• 제16권4호
• /
• pp.254-261
• /
• 2009

In this study, we investigated the unit process parameters in spherical $UO_2$ kernel preparation. Nearly perfect spherical $UO_3$ microspheres were obtained from the 0.6M of U-concentration in the broth solution, and the microstructure of the $UO_2$ kernel appeared the good results in the calcining, reducing, and sintering processes. For good sphericity, high density, suitable microstructure, and no-crack final $UO_2$ microspheres, the temperature control range in calcination process was $300{\sim}450^{\circ}C$, and the microstructure, the pore structure, and the density of $UO_2$ kernel could be controlled in this temperature range. Also, the concentration changes of the ageing solution in aging step were not effective factor in the gelation of the liquid droplets, but the temperature change of the ageing solution was very sensitive for the final ADU gel particles.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권7호
• /
• pp.3231-3244
• /
• 2016

As processor design has been transiting from homogeneous multicore processor to heterogeneous multicore processor, traditional Amdahl's law cannot meet the new challenges for asymmetric multicore system. In order to further investigate the impact factors related to the Overhead of Data Preparation (ODP) for Asymmetric multicore systems, we evaluate an asymmetric multicore system built with CPU-GPU by measuring the overheads of memory transfer, computing kernel, cache missing and synchronization. This paper demonstrates that decreasing the overhead of data preparation is a promising approach to improve the whole performance of heterogeneous system.

• 한국세라믹학회지
• /
• 제47권6호
• /
• pp.590-597
• /
• 2010

HTGR using a TRISO coated particles as nuclear raw fuel material can be used to produce clean hydrogen gas and process heat for a next-generation energy source. For these purposes, a TRISO coated particle was prepared with 3 pyro-carbon (buffer, IPyC, and OPyC) layers and 1 silicone carbide (SiC) layer using a CVD technique on a spherical $UO_2$ kernel surface as a fissile material. In this study, a spherical $UO_2$ particle was prepared using a modified sol-gel method with a vibrating nozzle system, and TRISO coating fabrication was carried out using a fluidized bed reactor with coating gases, such as acetylene, propylene, and methyltrichlorosilane (MTS). As the results of this study, a spherical $UO_2$ kernel with a sphericity of 1+0.06 was obtained, and the main process parameters in the $UO_2$ kernel preparation were the well-formed nature of the spherical ADU liquid droplets and the suitable temperature control in the thermal treatment of intermediate compounds in the ADU, $UO_3$, and $UO_2$ conversions. Also, the important parameters for the TRISO coating procedure were the coating temperature and feed rate of the feeding gas in the PyC layer coating, the coating temperature, and the volume fraction of the reactant and inert gases in the SiC deposition.

• 한국분말재료학회지
• /
• 제16권2호
• /
• pp.115-121
• /
• 2009

The effects of thermal treatment conditions on ADU (ammonium diuranate) prepared by SOL-GEL method, so-called GSP (Gel supported precipitation) process, were investigated for $UO_2$ kernel preparation. In this study, ADU compound particles were calcined to $UO_3$ particles in air and Ar atmospheres, and these $UO_3$ particles were reduced and sintered in 4%-$H_2$/Ar. During the thermal calcining treatment in air, ADU compound was slightly decomposed, and then converted to $UO_3$ phases at $500^{\circ}C$. At $600^{\circ}C$, the $U_3O_8$ phase appeared together with $UO_3$. After sintering of theses particles, the uranium oxide phases were reduced to a stoichiometric $UO_2$. As a result of the calcining treatment in Ar, more reduced-form of uranium oxide was observed than that treated in air atmosphere by XRD analysis. The final phases of these particles were estimated as a mixture of $U_3O_7$ and $U_4O_9$.

• 대한토목학회논문집
• /
• 제34권4호
• /
• pp.1117-1123
• /
• 2014

물은 인류와 동식물의 필요조건으로, 물 부족 상태 즉 가뭄은 전 세계적으로 가장 두려워하는 재해 중 하나이다. 본 연구는 지역적인 특성을 고려하여 가뭄을 판단하고 대응하기 위해 목표재현기간을 설정하고 한반도 전역을 대상으로 시 군 구 단위의 지역별 목표 표준강수지수를 산정하였다. 먼저 한반도에 위치한 30년 이상의 자료기간을 보유한 88개 기상관측소의 강우자료에서 월별강우자료를 추출하고 SPI (3)가뭄지수를 산정하였다. 산정된 SPI (3)에서 연도별 최저치를 추출하여 매개변수적 빈도해석과 경계핵밀도 함수를 이용한 비매개변수적 빈도해석을 실시하였다. 또한, 목표재현기간을 30년으로 설정하고 비매개변수적 빈도해석 결과에 티센비 적용하여 시 군 구 단위로 목표 표준강수지수를 산정하였다. 분석결과 가뭄의 심도와 빈도가 지역별로 크게 다르게 나타남을 확인 할 수 있었으며, 이는 한반도 가뭄의 판단과 대응을 위한 기초자료로 국가적인 수자원계획과 방재대책에 기여하고자 한다.

• 한국세라믹학회지
• /
• 제42권9호
• /
• pp.618-623
• /
• 2005

HTGR (High Temperature Gas-Cooled Reactor) is highlighted to next generation power plant for producing the clean hydrogen gas. In this study, the spherical $UO_2$ kernel via $UO_3$ gel particles was prepared by the sol-gel process. Raw material of slightly Acid Deficient Uranyl Nitrate (ADUN) solution, which has pH = 1.10 and $[NO_3]/[U]$ mole ratio = 1.93, was obtained from dissolution of $U_3O_8$ powder with conc.-$HNO_3$. The surface of these spherical $UO_3$ gel particles, which was prepared from the broth solution, consisted of 1 M-uranium, 1 M-HMTA, and urea, were covered with the fine crystallite aggregates, and these particles were so hard that crushed well. But the other $UO_3$ gel particles prepared with the broth solution, consisted of 2 M-uranium, 2 M-HMTA, and urea, have soft surface characteristics and an amorphous phase. This type of $UO_3$ gel particles is some chance of doing possibility of high density from the compaction. The amorphous $UO_3$ gel particles was converted to $U_3O_8$ and then $UO_2$ by calcination at $600^{\circ}C\;in\;4\%\;-\;H_2\;+\;N2$ atmosphere.

• 한국세라믹학회지
• /
• 제44권8호
• /
• pp.437-444
• /
• 2007

The broth solution was prepared by the mixing of an uranyl nitrate, THFA, PVA, and water. The uranium concentration of the broth solution was $0.5{\sim}0.8$ mole-U/L and the viscosity of it was $30{\sim}80cSt$. The droplets of this broth solution were farmed in air and ammonia by the vibrating nozzle with the frequency of 100 Hz at the amplitude of $100{\sim}130V$. The diameter of the droplet was about $1900{\mu}m$ from using the nozzle diameter of 1 mm. The diameter of the aged gel was about $1400{\mu}m$ after aging in ammonia solution at $60{\sim}80^{\circ}C$, and the dried gel with the diameter of about $900{\mu}m$ was obtained after drying at room temperature or partially vacuum condition. The diameter of the calcined $UO_3$ microsphere after calcination at $600^{\circ}C$ appeared about $800{\mu}m$ in air atmosphere. Although the droplets of the same sizes were formed, the calcined microspheres of different sizes were manufactured in the case of the broth solutions of the different uranium concentration. The droplets of the desired diameters were obtained by the change of the nozzle diameters and the broth flow rates.

• 공업화학
• /
• 제24권2호
• /
• pp.165-170
• /
• 2013

초고온가스로 핵연료 구형 UCO (uranium oxycarbide) 입자 제조과정 중 중간화합물 제조에서 적용하고 있는 내부겔화공정을 대체하기 위해 외부겔화공정을 도입하는 연구가 진행 중에 있다. 외부겔화공정을 이용해서 구형 UCO입자를 제조하기 위한 사전실험으로, 중간화합물인 ADU (ammonium di-uranate) 겔 입자를 제조하기 위한 원료용액인 모사 broth 용액을 제조하여 카본블랙 입자를 분산시키는 실험이 수행되었다. 다양한 종류의 카본블랙 입자를 사용해서 모사 broth 용액에 분산실험을 수행한 결과, Cabot G 제품이 용액상에서 분산안정성과 균일한 분산상태를 나타내고 있어서, 본 연구의 카본블랙으로 선정되었다. 또한 나노크기 입자로 응집된 카본블랙 입자를 고점성 액상물질에 효율적으로 분산시키기 위해서는, 금속염용액에 카본블랙 입자를 투입하고 ultrasonic force를 이용해서 응집입자를 해체한 다음, 고점성 물질인 PVA (poly vinyl alcohol)를 투입하여 강력한 기계식혼합기를 이용해서 6000 rpm으로 2차 분산 혼합시키는 경우, ultrasonic force에 의한 broth 용액의 물성이 유지되면서 카본블랙 입자의 분산안정성과 분산상태가 양호한 broth용액을 얻을 수 있었다.

• 한국세라믹학회지
• /
• 제45권11호
• /
• pp.725-733
• /
• 2008

In this study the preparation method of the spherical ADU droplets, intermediate compound of a HTGR nuclear fuel, was detailed-reviewed and then, the characteristics on an ageing and a washing steps among the wet process and the thermal treatment process on the died-ADU${\rightarrow}UO_3$ conversion with the high temperature furnaces were studied. The key parameters for spherical droplets forming are a precise control of feed rate and a suitable viscosity value selection of a broth solution. Also, a harmony of vibrating frequency and amplitude of a vibration dropping system are important factor. In our case, an uranium concentration is $0.5{\sim}0.7mol/l$, viscosity is $50{\sim}80$ centi-Poise, vibration frequency is about 100Hz. In thermal treatment for no crack spherical $UO_3$ particle, the heating rate in the calcination must be operated below $2^{\circ}C$/min, in air atmosphere.