• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.6
• /
• pp.773-785
• /
• 2014

For decades, modeling of pilots has been intensively studied due to its advantages in reducing costs for training and enhancing safety of pilots. In particular, research for modeling of pilots' non-kinetic behaviors which refer to the decisions made by pilots is beneficial as the expertise of pilots can be inherent in the models. With the recent growth in the amount of combat logs accumulated, employing statistical learning methods for the modeling becomes possible. However, the combat logs consist of heterogeneous data that are not only continuous or discrete but also sequence independent or dependent, making it difficult to directly applying the learning methods without modifications. Therefore, in this paper, we present a kernel function named hybrid sequence kernel which addresses the problem by using multiple kernel learning methods. Based on the empirical experiments by using combat logs obtained from a simulator, the proposed kernel showed satisfactory results.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.23 no.1
• /
• pp.1-10
• /
• 2020

Effective jamming in electronic warfare depends on proper jamming technique selection and jamming parameter estimation. For this purpose, this paper proposes a new method of estimating jamming parameters using Gaussian kernel function networks. In the proposed approach, a new method of determining the optimal structure and parameters of Gaussian kernel function networks is proposed. As a result, the proposed approach estimates the jamming parameters in a reliable manner and outperforms other methods such as the DNN(Deep Neural Network) and SVM(Support Vector Machine) estimation models.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.46 no.2
• /
• pp.69-77
• /
• 2001

'Chalok 1/Cooktail 51' corns, supersweet corn gene controlled by either brittle-l (bt l) or shrunken-2(sh2) gene introduced into waxy corn, showed agronomic characteristics between supersweet corn and waxy corn. The ears were harvested at different development stages from 15 to 35 days after silking (DAS). Ear diameter of Cocktail 51 and 'Cocktail 51'/Chalok 1 increased from 15 DAS to 30 DAS and little increased thereafter, but that of Chalok 1/Cocktail 51 and 'Chalok l' increased until 35 DAS. Diameter of ear extension increased more in Cocktail 51 and Chalok 1/Cocktail 51 corn than Chalok 1. Ear fresh weight of Cocktail 51 decreased later 30 DAS but those of the other hybrids were vice versa. Rate of super-sweet kernels per ear of Chalok 1/Cocktail 51 corns was about 38 %. Development, and elongation of kernel were much more prominent in supersweet kernel than in waxy kernel, but fresh weight increased higher in waxy kernel than supersweet kernel. Moisture content in kernel decreased from 15 DAS to 35 DAS. Total sugar content of the kernel increased until 25 DAS, and that of Cocktail 51 kernel showed the highest among of them. After cooked by steam, flavor and mastication feeling rate cooked by steam of Cocktail 51 and Chalok 1/Cocktail 51 were increased from 15 DAS to 25 DAS and markedly decreased thereafter. But those of Chalok l/Cocktail 51 and, Chalok 1 were decreased after 30 DAS. These results suggested that the optimum harvest date for fresh supersweet corn (Cocktail 51), Cocktail 51/Chalok 1 seems to be about 20 DAS and Chalok 1/Cocktail 51 and waxy com (Chalok 1) was about 25 DAS.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.774-778
• /
• 1996

Developed in this research is a surface modeling kernel for various CAD/CAM applications. Its internal surface representations are rational parametric polynomials, which are generalizations of nonrational Bezier, Ferguson, Coons and NURBS surface, and are very fast in evaluation. The kernel is designed under the OOP concepts and coded in C++ on PCs. The present implementation of the kernel supports surface construction methods, such as point data interpolation, skinning, sweeping and blending. It also has NURBS conversion routines and offers the IGES and ZES format for geometric information exchange. It includes some geometric processing routines, such as surface/surface intersection, curve/surface intersection, curve projection and so forth. We are continuing to work with the kernel and eventually develop a B-Rep based solid modeler.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.61 no.3
• /
• pp.196-207
• /
• 2016

In monsoon climates, persistent shade is a troublesome weather condition with an impact on the growth and yield of corn (Zea mays L.). We imposed 7, 14, 21, and 28 days of consecutive shade (CS) on Gwangpyeongok and P3394 corn hybrids at the beginning of the kernel filling stages. Shade had little impact on leaf area and dry matter accumulation in the stem and leaves. However, dry matter accumulation in the ear was severely reduced by approximately 28% and 53% after 14 and 28 days of CS, respectively. For the components of grain yield, 7 and 14 days of shade did irreparable damage to the number of filled kernels, the kernel number per ear row, and the percent of filled kernels, but did little damage or reversible damage after removal of the shade to the 100-grain weight and the row number per ear. Shade significantly reduced the relative growth rate (RGR) due to a decrease in the net assimilation rate (NAR). These results suggest that source activity limitation by shade during the kernel filling stages leads to the inhibition of sink activity and size. The yield of biomass, ear, and grain logistically declined as the length of CS increased. Probit analysis revealed that the number of days of CS needed to cause 25% and 50% reductions in grain yield were 3.7 and 23.1, respectively. These results suggest that the plant yield loss induced by shade at the beginning of the kernel filling stages is mainly achieved within the first 7 days of consecutive shade.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.57 no.2
• /
• pp.127-131
• /
• 2012

In this study we examined the changes in expression of pigments in black rice during kernel development, which were sampled at 2~3-day intervals to the 40th day after flowering. The first expression of pigment on kernels was observed on the seed coat about 5 days after flowering. At that times, the ratio of pigment expression was 0.08% of total area. The order in expression of pigments in black rice during kernel development was top first, followed by bottom, dorsal side, then ventral side. Maximum percentage of the total colored area in kernel was about 25 days after flowering. After that, the color has changed to dark purple from pale purple during kernel development after flowering. After harvesting, the non-uniform color kernels were observed. As a result, the ventral side in a kernel was a position of the non-uniform color such as a mixture of pale purple and dark purple. Also, we could be concluded that patten of pigment expression was similar in kernel development.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.6
• /
• pp.1011-1018
• /
• 2006

Due to rapid development of mobile communication terminals and various requests of their users, multimedia information including image information has been the basis of mobile communication contents. In order to use vectored image information efficiently, which is more favorable than bit-mapped image information when transmission delay time and costs are considered, efficient vector graphics supporting systems are needed. Therefore, vector graphics kernel systems have been proposed and standardization attempts have been made in order to increase interoperability. In this paper, a vector graphics kernel based on OpenVG is designed and implemented. OpenVG was proposed as a standard vector graphics kernel by Khronos Group recently. The implemented vector graphics kernel, named by alexVG, is developed on a PC emulator as well as on a development board equipped with an ARM processor. In addition, performance tests are made in order to verify its functions.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.3
• /
• pp.547-553
• /
• 2004

Linux is the one of various RTOS, also embedded linux has being studied with focus on technical stability and commercial utilities. In this paper, the technical trial was discussed on the development of real-time operating system that provides real time capability and extends the network communications ability and would be applied to the maritime mobile communication system through analysis the embedded linux kernel. Some techniques for Analyzing the embedded linux kernel and designing the target board, making the kernel image and porting the kernel are summarized in this paper.

• Korean Journal of Agricultural Science
• /
• v.43 no.5
• /
• pp.761-768
• /
• 2016

Recently, swine production costs have increased due to increased feed cost, especially the price of corn and soybean meals. Soybean meal is traditionally an expensive ingredient, but the price of corn has dramatically increased because of increased biofuel production. This change has resulted in the swine industry looking for alternatives in order to reduce feed cost, resulting in decreased production costs. Thus, various alternatives have been used as feed ingredients to replace corn, soybean meal, or other expensive ingredients. One othercandidate may be palm kernel co-products that are a by-product of oil extraction from palm fruits. Palm kernel co-products have not been used in swine diets due to high fiber content and imbalanced amino acids compared with corn and soybean meal. However, recent studies showed that palm kernel co-products did not have any negative effects on growth performance of pigs when they replaced some proportions of corn and soybean meal. In addition, palm kernel co-products may provide some physiological properties to pigs by modifying gut microbiota and/or immunity of pigs, resulting in improvement of growth and health of pigs. Therefore, the value of palm kernel co-products were reviewed as one of the alternatives for corn, soybean meal, or other major ingredients in swine diets.

• Journal of the Korean Ceramic Society
• /
• v.47 no.6
• /
• pp.590-597
• /
• 2010

HTGR using a TRISO coated particles as nuclear raw fuel material can be used to produce clean hydrogen gas and process heat for a next-generation energy source. For these purposes, a TRISO coated particle was prepared with 3 pyro-carbon (buffer, IPyC, and OPyC) layers and 1 silicone carbide (SiC) layer using a CVD technique on a spherical $UO_2$ kernel surface as a fissile material. In this study, a spherical $UO_2$ particle was prepared using a modified sol-gel method with a vibrating nozzle system, and TRISO coating fabrication was carried out using a fluidized bed reactor with coating gases, such as acetylene, propylene, and methyltrichlorosilane (MTS). As the results of this study, a spherical $UO_2$ kernel with a sphericity of 1+0.06 was obtained, and the main process parameters in the $UO_2$ kernel preparation were the well-formed nature of the spherical ADU liquid droplets and the suitable temperature control in the thermal treatment of intermediate compounds in the ADU, $UO_3$, and $UO_2$ conversions. Also, the important parameters for the TRISO coating procedure were the coating temperature and feed rate of the feeding gas in the PyC layer coating, the coating temperature, and the volume fraction of the reactant and inert gases in the SiC deposition.