• International Journal of Automotive Technology
• /
• v.7 no.3
• /
• pp.289-294
• /
• 2006

Better fundamental understanding of the interactions between the in-cylinder flows and combustion process is an important requirement for further improvement in the fuel economy and emissions of internal combustion(IC) engines. Flow near a spark plug at the time of ignition plays an important role for early flame kernel development(EFKD). Velocity data measurements in this study were made with a two-component laser Doppler velocimetry(LDV) near a spark plug in a single cylinder optical spark ignition(SI) engine with a heart-shaped combustion chamber. LDV velocity data were collected on an individual cycle basis under wide-open motored conditions with an engine speed of 1,000rpm. This study examines and compares the flow fields as interpreted through ensemble, cyclic and discrete wavelet transformation(DWT) analysis. The energy distributions in the non-stationary engine flows are also investigated over crank angle phase and frequency through continuous wavelet transformation(CWT) for a position near a spark plug. Wavelet analysis is appropriate for analyzing the flow fields in engines because it gives information about the transient events in a time and frequency plane. The results of CWT analysis are provided and compared with the mean flows of DWT first decomposition level for all cycles at a position. Low frequency high energy found with CWT corresponds well with the peak locations of the mean velocity. The high frequency flows caused by the intake jet gradually decay as the piston approaches the bottom dead center(BDC).

• Applied Chemistry for Engineering
• /
• v.24 no.2
• /
• pp.165-170
• /
• 2013

An external gelation method in place of an internal gelation method applied to the fabrication process of an intermediated compound of Uranium Oxy-Carbide (UCO) kernel spheres for Very High Temperature Reactor (VHTR) fuel preparation is under development in Korea. For the preliminary experiments of the UCO kernel sphere preparation using an external gelation method, the carbon black dispersion experiments were carried out using a simulated broth solution. From the selection experiments of various kinds of carbon black through dispersion experiments in a viscous metal salt solution, Cabot G carbon black was selected owing to its dispersion stability, and the homogeneous dispersing state of carbon black particles in our system. For the effective dispersion of nano-size aggregated carbon black particles in a high viscous liquid, the carbon black particles in a metal salt solution were first de-aggregated with ultrasonic force. The mixed solution was then dispersed secondly by the use of the extremely high-speed agitation with a mechanical mixer of 6000 rpm after feeding the Poly Vinyl Alcohol (PVA) in the solution. This results in the broth solution with good stability and homogeneity alongside no further changes in physical properties.

• Journal of Korea Spatial Information System Society
• /
• v.3 no.1 s.5
• /
• pp.95-108
• /
• 2001

The provision of spatial data is a key infrastructural requirement for the promotion of economic growth, environmental quality, social progress, etc. 4S technology integrates 4 kinds of systems that process spatial data: GIS (Geographic Information System), GNSS (Global Navigation Satellite System), ITS (Intelligent Transport System), and SIIS (Spatial Imagery Information System). Spatial data processing field is expected to get synergy effect and overcomes development limit of individual unit technology via 4S technology. This paper discusses both the development of 4S-kernel technology and the construction of 4S-based framework, In the development of 4S kernel technology, we will concentrate on the following issues: the development of 4S base components for reciprocity integration among GIS, SIIS, GNSS and ITS technologies, the development of 4S-Mobile S/W and H/W, 4S-Van components, and national LBS technologies. And in the construction of 4S-based framework, we will especially concentrate on the ISP for overall 4S technologies, the international cooperative research center, and the guide model deduction for supervision and certification of 4S projects. Finally, we examine about how the construction of 4S-baed framework affects 4S industry.

• The Journal of Economics, Marketing and Management
• /
• v.1 no.1
• /
• pp.1-14
• /
• 2013

Firstly, this article expounds that business service industry plays an important role in adjusting industrial structure, transforming mode of economic growth, improving people's living standards, enhancing Enterprise's Kernel Competitiveness and promoting the development of service industry. Then it analyzes the development of business services in Shandong from two perspectives. The first perspective, by using methodology for statistical analysis, it will review the development scale, professional level, the number of opening units, quantity of employment, and operating revenue of business services in Shandong. On this basis, the article will summarize its development characteristics, experience and existing shortcomings. The second perspective, by using comparison analysis methodology, to compare the development of Shandong with Jiangsu, Guangdong, Zhejiang and Shanghai's and found the subjective and objective factors that restrict the development of business service industry in Shandong. In the light of restricting factors, countermeasures have been developed based on the experience at home and abroad. These countermeasures will contribute to promoting the optimization and upgrading of industrial structure, improving industrial competitiveness and speeding up the economic development rapidly and stably.

• Journal of the Korean Ceramic Society
• /
• v.51 no.5
• /
• pp.418-423
• /
• 2014

Fully ceramic micro encapsulated (FCM) nuclear fuel is a concept recently proposed for enhancing the stability of nuclear fuel. FCM nuclear fuel consists of tristructural-isotropic (TRISO) fuel particles within a SiC matrix. Each TRISO fuel particle is composed of a $UO_2$ kernel and a PyC/SiC/PyC tri-layer which protects the kernel. The SiC ceramic matrix is created by sintering. In this FCM fuel concept, fission products are protected twice, by the TRISO coating layer and by the SiC ceramic. The SiC ceramic has proven attractive for fuel applications owing to its low neutron-absorption cross-section, excellent irradiation resistivity, and high thermal conductivity. In this study, a SiC-matrix composite containing TRISO particles was sintered by hot pressing with $Al_2O_3-Y_2O_3$ additive system. Various sintering conditions were investigated to obtain a relative density greater than 95%. The internal distribution of TRISO particles within the SiC-matrix composite was observed using an x-ray radiograph. The fracture of the TRISO particles was investigated by means of analysis of the cross-section of the SiC-matrix composite.

• Journal of the Korean Ceramic Society
• /
• v.44 no.2 s.297
• /
• pp.124-131
• /
• 2007

In this study, first the ADU gel particle, an intermediate for final $UO_2$ kernel of a HTGR nuclear fuel, was prepared from sol-gel method using the broth solution which was made by mixing of the uranyl nitrate, poly vinyl alcohol and tetra-hydrofurfuryl alcohol. The prepared dried-ADU gel particles were converted to the $UO_2\;via\;UO_3$ from thermal treatment with the 4% $H_2$ atmosphere. The sizes of the spherical liquid droplets appeared $1900{\sim}2100{\mu}m$, and the harmony between the flow rate of the broth solution and the frequency and the amplitude of a vibrating system are important factors for the spherical ADU gel particles via the mono size spherical droplets. From the XRD and FT-IR analyses, the prepared ADU gel particles were judged to be a $UO_3{\cdot}xNH_3{\cdot}yH_2O$ form, and the most important factor during the thermal treatment of the dried-ADU gel particle must be avoided a rapidly heating rate in the range of $180{\sim}400^{\circ}C$, and the heating rate should be kept below $5^{\circ}C/min$.

• Journal of Powder Materials
• /
• v.16 no.2
• /
• pp.115-121
• /
• 2009

The effects of thermal treatment conditions on ADU (ammonium diuranate) prepared by SOL-GEL method, so-called GSP (Gel supported precipitation) process, were investigated for $UO_2$ kernel preparation. In this study, ADU compound particles were calcined to $UO_3$ particles in air and Ar atmospheres, and these $UO_3$ particles were reduced and sintered in 4%-$H_2$/Ar. During the thermal calcining treatment in air, ADU compound was slightly decomposed, and then converted to $UO_3$ phases at $500^{\circ}C$. At $600^{\circ}C$, the $U_3O_8$ phase appeared together with $UO_3$. After sintering of theses particles, the uranium oxide phases were reduced to a stoichiometric $UO_2$. As a result of the calcining treatment in Ar, more reduced-form of uranium oxide was observed than that treated in air atmosphere by XRD analysis. The final phases of these particles were estimated as a mixture of $U_3O_7$ and $U_4O_9$.

• The KIPS Transactions:PartA
• /
• v.9A no.3
• /
• pp.327-332
• /
• 2002

Conventional proxy web cache, which is generally used to caching server, is a content-copy based system. This method focuses on speeding up the phase delivery not improving the webserver performance. However, if immense clients attempt to connect the webserver simultaneously, the proxy web cache cannot achieve the desired result. In this paper, we propose the web accelerator called the SCALA-AX, whitch improves web server performance by accelerating the delivery contents. The SCALA-AX is built in the Linux-based kernel as a kernel modulo and works in combination with the conventional webserver program. The SCALA-AX speeds up the processing rate of the webserver, because it processes the requests using the kernel thread. The SCALA-AX also applies the well-developed cache algorithm to the processing, and thus it obtains the advantage of the caching server without installing additional hardware. A banchmarking test demonstrates that the SCALA-AX improves webserver performance by up to 500％ for content delivery.

• The KIPS Transactions:PartA
• /
• v.8A no.1
• /
• pp.16-26
• /
• 2001

This paper proposes an extended scheduler model that is an extension of the existing model proposed already in [4, 5], which consists of upper layer task scheduler and lower layer scheduling framework. However, in order to support aperiodic task scheduling, the task scheduler has been divided into two parts, such as periodic task control component and aperiodic task control component. Thus, the proposed model can support various bandwidth-preserving servers that can service aperiodic tasks. The model distinctly separates a classic monolithic kernel scheduler into several kernel components according to their functionality. This enables system developers to implement a new scheduling algorithm or aperiodic task server independent of complex low kernel mechanism, and reconfigure the system at need. In Real-Time Linux [6], we implemented the proposed scheduling framework representative scheduling algorithms, and server bandwidth-preserving servers on purpose to test. Throughout these implementations, we confirmed that a new algorithm or server could be developed independently without updates of complex low kernel modules. In order to verify efficiency of the proposed model, we measured the performance of several aperiodic task servers. The results showed this the performance of model, which even consisted of two hierarchical components and several modules, didnt have such high run-time overhead, and could efficiently support reconfiguration and scheduler development.

• The Journal of the Korea Contents Association
• /
• v.7 no.1
• /
• pp.139-146
• /
• 2007

Most of embedded systems have been developed practically based on the PC platform equipped with Intel x86 CPU since it is able to reduce the total time for product development and improve the reliability of product by making use of a variety of solutions developed for a long time in the PC environment. Also, embedded systems based on PC-platform mainly use a high-capacity hard disk as data storage device for applications intending to store multimedia data. Recently, while the capacity of hard disk is increasing rapidly, the start-up ready time of hard disk is growing longer more than 30 seconds. The lengthened start-up ready time may delay the booting time of embedded system seriously, weighting users down with inconvenience. This paper proposes the refined system architecture and the dynamic IDE device probing method for fast booting of linux kernel in the embedded system based on PC platform with high-capacity hard disks, and the performance of proposed methods is evaluated and presented.