• 한국재료학회지
• /
• 제20권12호
• /
• pp.691-698
• /
• 2010

Magnesium hydroxide-melamine core-shell particles were prepared through the coating of melamine monomer on the surface of magnesium hydroxide in the presence of phosphoric acid. The melamine monomer was dissolved in hot water but recrystallized on the surface of magnesium hydroxide by quenching to room temperature in the presence of phosphoric acid. The core-shell particle was applied to low-density polyethylene/ ethylene vinyl acetate (LDPE/EVA) resin by melt-compounding at $180^{\circ}C$ as flame retardant. The effect of magnesium hydroxide and melamine content has been studied on the flame retardancy of the core-shell particles in LDPE/EVA resin according to the preparation process and purity of magnesium hydroxide. Magnesium hydroxide prepared with sodium hydroxide rather than with ammonia solution revealed higher flame retardancy in core-shell particles with LDPE/EVA resin. At 50 wt% loading of flame retardant, core-shell particles revealed higher flame retardancy compared to that of the exclusive magnesium hydroxide in LDPE/EVA composite, and it was possible to satisfy the V0 grade in the UL-94 vertical test. The synergistic flame retardant effect of magnesium hydroxide and melamine core-shell particles was explained as being due to the endothermic decomposition of magnesium hydroxide and melamine, which was followed by the evolution of water from the magnesium hydroxide and porous char formation due to reactive nitrogen compounds, and carbon dioxide generated from melamine.

• 한국패류학회지
• /
• 제30권2호
• /
• pp.165-168
• /
• 2014

굴 패각은 외부 침입자들로부터 자신을 보호하는 기능 외에도 잠재적 성장범위를 의미하므로 패각모니터링은 굴 성장을 위해 중요한 의미를 지닌다. 이를 위해 우리는 서로 다른 3해역 (완도, 한산거제만, 북만) 으로부터 채집한 패각의 성분분석을 통해 양식장 환경모니터링 도구로써의 활용가능성을 살펴보았다. 완도해역에서 채집된 굴 패각은 높은 열분해온도로 비교적 안정된 나노구조체 형상을 지닌 것으로 판단되고, 이는 상대적으로 진주층이 두터울 경우의 특징이다. 또한 패각중 성분분석결과 황의 함량이 낮고 납이 검출되지 않는 등 비교적 안정적인 굴양식환경을 나타내고 있다.

• Journal of Electrical Engineering and Technology
• /
• 제13권2호
• /
• pp.781-789
• /
• 2018

This paper proposes a new approach utilizing empirical mode decomposition (EMD) reconstruction to process vibration signals of a transformer under DC bias caused by high voltage direction transmission (HVDC), which is the potential cause of additional vibration and noise from transformer. Firstly, the Calculation Method is presented and a 3D model of transformer is simulated to analyze transformer deformation characteristic and the result indicate the main vibration is produced along axial direction of three core limbs. Vibration test system has been built and test points on the core and shell of transformer have been measured. Then, the signal reconstruction method for transformer vibration based on EMD is proposed. Through the EMD decomposition, the corrupted noise can be selectively reconstructed by the certain frequency IMFs and better vibration signals of transformer have been obtained. After EMD reconstruction, the vibrations are compared between transformer in normal work and with DC bias. When DC bias occurs, odd harmonics, vibration of core and shell, behave as a nonlinear increase and the even harmonics keep unchanged with DC current. Experiment results are provided to collaborate our theoretical analysis and to illustrate the effectiveness of the proposed EMD method.

• 대한화학회지
• /
• 제53권6호
• /
• pp.677-682
• /
• 2009

본 논문에서는 ZnS:Mn/ZnS 코어-쉘 양자점을 유기금속전구체의 열분해 방법으로 합성하였다. 쉘의 형성온도를 135$^{\circ}C$로 고정한 반면 코어 나노입자의 합성 온도 조건을 다양화 하여 각 조건하에서 형성된 양자점들의 특성을 조사하였다. 실험을 통해 얻은 양자점들은 UV-Vis, 액체 photoluminescence (PL) spectroscopy 방법으로 광 특성을 조사하였으며, 또한 XRD, HR-TEM, 및 EDXS 분석으로 입자크기와 조성 등을 측정하였다. 실험 결과 가장 좋은 광 특성을 보인 나노입자의 합성조건은 코어와 쉘 모두 135$^{\circ}C$인 것으로 밝혀 졌으며, 이 조건에서 얻은 양자점은 583 nm 의 PL 발광 피이크와 42.15%의 높은 양자효율을 나타내었다. HR-TEM 으로 측정한 ZnS:Mn/ZnS 양자점의 평균 입자크기는 지름이 약 4.0 - 5.4 nm 정도였으며, 특히 150$^{\circ}C$의 온도 조건에서는 타원형의 입자가 형성되는 것이 관찰되었다.

• 한국전기전자재료학회논문지
• /
• 제27권3호
• /
• pp.178-183
• /
• 2014

Recently, various type of nanomaterials such as nanorod, nanowire, nanotube and their core/shell nanostructures have attracted much attention in photocatalyst due to their unique properties. Among them, Type-II core/shell heterostructures have extensively studied because it has exhibited improved electrical and optical properties against their single-component nanostructure. Such structures are expected to offer high absorption efficiency and fast charge transport due to their stepwised energetic combination and large internal surface area. Thus, it has been considered as potential candidates for high efficient photocatalytic activity. In this work, we introduce a novel chemical conversion process to synthesize Type-II ZnO/ZnSe core/shell heterostructures. A plausible conversion mechanism to ZnO/ZnSe core/shell heterostructres was proposed based on SEM, XRD, TEM and XPS analysis. The ZnO/ZnSe heterostructures exhibited excellent photocatalytic activity toward the decomposition of RhB dye compared to the ZnO nanorod arrays due to enhanced light absorption and the type-II cascade band structure.

• 한국분말재료학회지
• /
• 제17권3호
• /
• pp.230-234
• /
• 2010

Homogenous silica-coated $CoFe_2O_4$ samples with controlled silica thickness were synthesized by the reverse microemulsion method. First, 7 nm size cobalt ferrite nanoparticles were prepared by thermal decomposition methods. Hydrophobic cobalt ferrites were coated with controlled $SiO_2$ using polyoxyethylene(5)nonylphenylether (Igepal) as a surfactant, $NH_4OH$ and tetraethyl orthosilicate (TEOS). The well controlled thickness of the silica shell was found to depend on the reaction time and the amount of surfactant used during production. Thick shell was prepared by increasing reaction time and small amount of surfactant.

• 대한기계학회논문집A
• /
• 제24권7호
• /
• pp.1763-1770
• /
• 2000

A finite element interface system for the design of optimal spot welding locations has been developed. In order to find out the optimal locations of spot welding points, iterative finite element an alyses are necessary, and thus automatic generation of finite element model for the structures with spot welded pointsis required. In this interface system, quadrilateral shell elements are automatically generated for finite element analysis of spot welded structured, which employs a domain decomposition methodand adaptive mesh(h-method).

• Elastomers and Composites
• /
• 제38권4호
• /
• pp.303-315
• /
• 2003

계면활성제가 흡착된 $CaCO_3$를 제조하여 흡착된 유화제의 농도, 개시제의 종류와 농도, 교반속도 및 반응온도에 따라 무기/유기계 core-shell 입자를 제조하였다. 제조된 복합입자의 전환율을 측정하여 중합의 최적조건과 분자량측정, 가수분해도, 필름형성온도, 유리전이온도, 입자경 측정 그리고 입자의 형태를 고찰하여 다음과 같은 결론을 얻었다. 무기/유기 core-shell 입자의 합성의 경우에는 유화제인 SDBS를 0.5 wt% 첨가한 $CaCO_3$를 core로 하여 MMA와 $3.16{\times}10^{-3}mol/L$ 농도의 APS를 단계적으로 주입하여 중합함으로서 $CaCO_3$ 입자 표면에서 MMA의 중합을 잘 유도할 수 있었으며 중합 도중 새로운 폴리머 입자의 생성이 적었다. 무기/유기계의 core-shell 입자의 경우는 염산에 의한 $CaCO_3$ 분해를 이용하여 캡슐화를 조사하고 시차주사열량계(DSC)에 의한 유리전이온도와 열분해 감소중량을 측정한 결과 외부의 유기 폴리머만 분해되는 특성, 에폭시 수지에서의 분산이 캡슐화 되지 않은 $CaCO_3$보다 우수한 특성, 입자경 분포도 측정 결과 입자경 분포도가 고르지 않고 그리고 전자 현미경에 의한 입자모양이 구형화된 특성등으로 core-shell 입자의 구조와 특성을 확인하였다.

• 한국환경보건학회지
• /
• 제30권5호
• /
• pp.427-431
• /
• 2004

The calcination characteristics of the waste Corbicula Japonica and Ostrea virginjca shell were examined for the future use as desulfurization sorbent. The weight variation was measured according to thermal-decomposition using TGA and observed variation of the phase. The qualitative and quantitative analysis of the sample were performed using XRD and the structural analysis, SEM. The results of TGA and XRD experiments showed that the almost all of the raw samples Corbicula Japonica and Ostrea virginjca were changed from calcite to lime by firing and calcination reaction. The result of SEM experiment showed that the plate type of the raw sample was changed to circle type, so the surface area ratio was increased. Above results suggested that waste Corbicula Japonica and Ostrea virginjca were usable in the viewpoint of the reuse of resource and the decrease of environmental pollution.

• Smart Structures and Systems
• /
• 제19권1호
• /
• pp.33-38
• /
• 2017

This research tries to present a nonlinear thermo-elastic solution for a functionally graded spherical shell subjected to mechanical and thermal loads. Geometric nonlinearity is considered using the Lagrange or finite strain tensor. Non-homogeneous material properties are considered based on a power function. Adomian's decomposition method is used for calculation of nonlinear results. Nonlinear results such as displacement can be evaluated for sphere in terms of different indexes of non-homogeneity. A comprehensive comparison between linear and nonlinear results and evaluation of the percentage of difference between them can be performed in this paper. The obtained results indicate that the improvement of the results due to usage of nonlinear analysis is depending on the non-homogeneous index.