• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.813-815
• /
• 2001

Permanent magnet DC motor is widely used in electrical tools, automotive manufacturing systems, electric vehicles, OA system drives, aircrafts and home appliances PM motors are suited for such an application, since they can be designed for high torque-to-speed ratio and efficiency. This paper deals with permanent magnet DC motor which is used in an electrical wheelchair. The motor has 6 PMs and 25 slots, and is coupled to the wheel with gears. In this study, motor design was carried out using finite element method. This paper discusses the design and construction of the prototype system and reports experimental results achieved from laboratory tests.

• 수산해양교육연구
• /
• 제19권1호
• /
• pp.84-90
• /
• 2007

This paper was studied on the electrochemical corrosion characteristics of weld zone for refrigerating and heating systems pipe. Austenitic stainless steel is widely applied to various fields of industry, because it is good to corrosion resistance and mechanical properties. But STS 304 is reliable to sensitization by heat cycle on welding. Therefore, in this study, electrochemical polarization test of STS 304 steel pipe manufactured by arc welding in tap water was carried out. And then polarization resistance behavior, uniform and local corrosion behaviors of base metal(BM), weld metal(WM) and heat affected zone(HAZ) for STS 304 pipe were investigated. The corrosion current density of STS 304 steel pipe is high in order of BM(153nA/cm2) < WM(614nA/cm2) < HAZ ($1.675{\mu}A/cm2$). The pitting potential of HAZ(238mV/SCE) for STS 304 is lower than BM(1206mV/SCE) and WM(369mV/SCE). Therefore, the local corrosion like pitting corrosion, galvanic corrosion and crevice corrosion of HAZ for STS 304 is more sensitive than BM and WM.

• The Journal of Advanced Prosthodontics
• /
• 제5권3호
• /
• pp.305-311
• /
• 2013

PURPOSE. Over the past years, the adhesion of fiber posts luted with simplified adhesive systems has been a matter of great interest. The aim of this study was to assess the post retentive potential of a self-adhesive resin cement using different adhesive systems to compare the push-out bond strengths of fiber posts. MATERIALS AND METHODS. The post spaces of 56 mandibular premolar roots were prepared and divided into 4 experimental groups and further divided into 2 subgroups according to testing time (n=7). The fiber posts (Rely X Fiber Post) were luted with a self-adhesive resin cement (RelyX Unicem) and one of the following adhesive systems: no adhesive, a total-etch adhesive resin (Single Bond), a two-step self-etch adhesive resin (Clearfil SE Bond) and a one-step self-etch adhesive resin (Clearfil S3 Bond). Each root was cut horizontally, and 1.5 mm thick six root segments were prepared. Push-out tests were performed after one week or three months (0.5 mm/min). Statistical analysis were performed with three-way ANOVA (${\alpha}$=.05). RESULTS. Cervical root segments showed higher bond strength values than middle segments. Adhesive application increased the bond strength. For one week group, the total-etch adhesive resin Single Bond showed higher bond strength than the self-adhesive resin cement RelyX Unicem applied without adhesive resin at middle region. For 3 months group, the two-step self-etch adhesive resin Clearfil SE Bond showed the highest bond strength for both regions. Regarding the time considered, Clearfil SE Bond 3 months group showed higher bond strength values than one week group. CONCLUSION. Using the adhesive resins in combination with the self-adhesive resin cement improves the bond strengths. The bond strength values of two-step self-etch adhesive resin Clearfil SE Bond improved as time passes.

• Environmental Engineering Research
• /
• 제20권1호
• /
• pp.65-72
• /
• 2015

A comparative study on response of a toxic compound thiocyanate ($SCN^-$) was carried out in continuous and fed batch moving bed reactor systems. Both systems had three sequential anaerobic, anoxic and aerobic reactors and operated at same hydraulic retention time. Feed $SCN^-$ was first increased from 600 mg/L to 1,000 mg/L for 3 days (shock 1) and then from 600 to 1,200 mg/L for 3 days (shock 2). In anaerobic continuous reactor, increase of effluent COD (chemical oxygen demand) due to shock load was only 2%, whereas in fed batch reactor it was 14%. In anoxic fed batch reactor recovery was partial in terms of $SCN^-$, phenol, COD and $NO{_3}{^-}$-N and $NO{_2}{^-}$-N removals and in continuous reactor complete recovery was possible. In both systems, inhibition was more significant on aerobic reactors than anaerobic and anoxic reactors. In aerobic reactors ammonia removal efficiency deteriorated and damage was irreversible. Present study showed that fed batch reactors showed higher substrate removal efficiency than continuous reactors during regular operation, but are more susceptible to toxic feed shock load and in nitrifying reactor damage was irreversible.

• 한국분무공학회지
• /
• 제4권1호
• /
• pp.27-33
• /
• 1999

An experimental study has been conducted to clarify the effect of vapor on droplet evaporation. Droplets of water, ethanol, n-hexadecane and n-heptane were exposed in air stream. Temperature, pressure, and flow velocity in the ambient air are 470K, 1 atm, and 2m/s, respectively. Measurements are carried out for the wide range of water vapor concentration$(0%\sim40%)$. To obtain the time histories of droplet diameter, suspended droplet in hot and humid air stream was synchronized with a back flash light, and enlarged droplet images were taken on a CCD camera. With the vapor concentration increasing, the evaporation rate constant of water droplet decrease slightly and the droplet of ethanol and n-heptane increase actively. The evaporation rate constant of n-hexadecane which has higher boiling point than water increases within around 30% of the concentration.

• 대한수학회보
• /
• 제42권4호
• /
• pp.855-867
• /
• 2005

Shattering or disintegration of mass is a well known phenomenon in fragmentation processes first introduced by Kol­mogorov and Filippop and extensively studied by many physicists. Though the mass is conserved in each break-up, the total mass decreases in finite time. We investigate this phenomenon in the n particle system. In this system, shattering can be interpreted such that, in uniformly bounded time on n, order n of mass is located in order o(n) of clusters. It turns out that the tagged particle processes associated with the systems are useful tools to analyze the phenomenon. For the newly defined stochastic shattering based on the above ideas, we derive far sharper conditions of fragmentation kernels which guarantee the occurrence of such a phenomenon than our previous work [9].

• Agricultural and Biosystems Engineering
• /
• 제5권1호
• /
• pp.5-9
• /
• 2004

This study was carried out to develop methods of reducing the effect of solar illumination on pixel gray-levels of machine vision for agricultural field use. Two kinds of monochrome CCD cameras with manual and auto-iris lenses were used to take pictures within a range of 15 to 120 klux of solar illumination. A camera having more precise automatic control functions gave much better result. Four kinds of indices using pixel gray-level of the $99\%$ white DRS (diffuse reflectance standard) as a reference were tried to compensate pixel gray-levels of an image for variable illumination. Coefficients of variation of the indices within a range of illumination were used as a criterion for comparison. The study concluded that an index of (A+B)/A, where A is gray-level of the $99\%$ DRS and B is gray-level of the tested material, gave the best consistency in the range of solar illumination.

• 한국작물학회지
• /
• 제44권3호
• /
• pp.221-224
• /
• 1999

A field experiment was carried out to observe the weed control effects of vetch and to evaluate vetch characteristics on clay loam soil in no-till direct-sown rice-vetch cropping systems. The effects of weed control, forage productivity, and N content of vetch plants were investigated. With the progress of plant growth, density of Chinese milk vetch (Astragalus sinicus L.) gradually decreased, but densities of foxtail and other weeds decreased steeply due to the depression by the over-shaded vetch canopy in a no-till direct-sown rice-vetch cropping paddy field. The vetch density in tillage systems was lower than in notillage cropping systems. Lower vetch density occurred with an increase in foxtail density and other weeds. Weed control effect increased by the progress of vetch growth, which indicated that the vetch canopy over-shaded the weeds. Vetch straw was degraded rapidly submergence after with water at the time of wet sowing of rice. Early harvesting of vetch seed resulted in lower seed germination. To acquire enough seedlings without re-sowing, the harvesting of seed should be delayed at least 28 days after the flowering stage in order to ensure the vetch population is sustainable in a no-till direct-sown rice-vetch cropping system. In order to improve the survival of vetch plants, vetch seeds should germinate from the heading .stage to before the full-ripening stage of rice plants. To enhance the percent of over-wintering survival, vetch seeds should germinate no later than the end of October in southern Korea. The dry weight of vetch plants increased with the progress of vetch growth until the flowering stage but N content decreased for 30 days from before the flowering stage (2.9%) until the ripening stage (1.8%). We concluded that Chinese milk vetch could have an effect on weed control before the flowering stage, sustainability without re-sowing of seed annually, and effective green manure for rice pre-crop in no-till direct-sown rice-vetch relay cropping systems.

• Journal of applied mathematics & informatics
• /
• 제4권1호
• /
• pp.211-222
• /
• 1997

In this paper we present a probabilistic approach for the estimation of realistic error bounds appearing in the execution of basic algebraic floating point operations. Experimental results are carried out for the extended product the extended sum the inner product of random normalised numbers the product of random normalised ma-trices and the solution of lower triangular systems The ordinary and probabilistic bounds are calculated for all the above processes and gen-erally in all the executed examples the probabilistic bounds are much more realistic.

• 산업경영시스템학회지
• /
• 제9권13호
• /
• pp.63-74
• /
• 1986

Rarely can it be anticipated that such a quality system as "Small group activity" of Japanese companies can be infused and placed as it is into Korean companies without any modification or troubles, as above two nations have developed and furnished their own social and cultural backgrounds. Therefore this study is made by inducing comparative '||'&'||' analytical methods to draw out and suggest the desirable direction which should be pursued by "Small group activity" of Korean companies.n companies.