• Tribology and Lubricants
• /
• v.33 no.6
• /
• pp.288-295
• /
• 2017

In order to improve the efficiency and reliability of the machine, the friction should be minimized. The most widely used method to minimize friction is to maintain the fluid lubrication state. However, we can reduce friction only up to a certain limit because of viscosity. As a result of several recent studies, surface texturing has significantly reduced the friction in highly sliding machine elements, such as mechanical seals and thrust bearings. Thus far, theoretical studies have mainly focused on isothermal/iso-viscous conditions and have not taken into account the heat generation, caused by high viscous shear, and the temperature conditions on the bearing surface. In this study, we investigate the effect of dimple depth and film-temperature boundary conditions on the thermohydrodynamic (THD) lubrication of textured parallel slider bearings. We analyzed the continuity equation, the Navier-Stokes equation, the energy equation, and the temperature-viscosity and temperature-density relations using a computational fluid dynamics (CFD) code, FLUENT. We compare the temperature and pressure distributions at various dimple depths. The increase in oil temperature caused by viscous shear was higher in the dimple than in the bearing outlet because of the action of the strong vortex generated in the dimple. The lubrication characteristics significantly change with variations in the dimple depths and film-temperature boundary conditions. We can use the current results as basic data for optimum surface texturing; however, further studies are required for various temperature boundary conditions.

• Journal of Korea Water Resources Association
• /
• v.40 no.7
• /
• pp.523-532
• /
• 2007

It has been operated since 1974, recently, the flood forecasting and warning system is applied in almost all the rivers in Korea, and the Storage Function Method (SFM) is used for flood routing. The SFM which was presented by Toshimitsu Kimura (1961) routes floods in channels and basins with the storage function as the basic equation. A watershed is divided into two zone, runoff and percolation area and runoff from runoff area is occurred when cumulated rainfall is not exceed saturation point, but exceed runoff is occurred from percolation area, too. Runoff area is given and not changed, runoff ratio is constant. In routing Process, runoff from runoff and percolation area is routed seperately with nonlinear conceptual reservoir having the same characteristics and it is unreasonable assumption. A modified SFM is proposed with storage function and continuity equation which has no assumption for routing process and effective rainfall is calculated by SCS Method. For Wi-stream, comparison of Kimura and the modified SFM is conducted, and it could be seen that the modified SFM is more improvable and applicable method easily by reducing the parameters.

• Journal of Korea Water Resources Association
• /
• v.34 no.3
• /
• pp.241-251
• /
• 2001

A flow determination algorithm is proposed for the distributed hydrologic model. The advantages of a single flow direction scheme and multiple flow direction schemes are selectively considered to address the drawbacks of existing algorithms. A spatially varied flow apportioning factor is introduced in order to accommodate the accumulated area from upslope cells. The channel initiation threshold area(CIT) concept is expanded and integrated into the spatially distributed flow apportioning algorithm in order to delineate a realistic channel network. An application of a field example suggests that the linearly distributed flow apportioning scheme provides some advantages over existing approaches, such as the relaxation of over-dissipation problems near channel cells, the connectivity feature of river cells, the continuity of saturated areas and the negligence of the optimization of few parameters in existing algorithms. The effects of grid sizes are explored spatially as well as statistically.

• Journal of Korean society of Dental Hygiene
• /
• v.8 no.4
• /
• pp.101-113
• /
• 2008

The purpose of this study was to examine the health segment of the 7th national physical education curriculum in an effort to grasp the state of oral health education in the school curriculum. And it's also meant to investigate the relationship between oral health education and the oral health awareness of some high schoolers to check into any possible problems with oral health education as part of health education. The subjects in this study were 240 students from two different girls' high schools in Seoul, on whom a survey was conducted to find out their oral health knowledge, behavior and awareness. And the health category of the current P.E. curriculum announced by the Ministry of Education was analyzed. The findings of the study were as follows: Oral health education provided by the high schools as part of health education in P.E. class wasn't linked to P.E. theories and practice. The weight of oral health education was extremely small in the health segment, and there was no sequence, continuity and integration among the content systems of oral health education for different grades. When some high schoolers were investigated, they weren't properly oral health conscious, though it was very important for students to receive oral health education to prevent and manage dental diseases. And they didn't consequently take care of their own oral health. Future research efforts should be channeled from diverse angles into developing oral health education curriculums to bolster school oral health education to improve national oral health.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.4
• /
• pp.242-251
• /
• 2020

In this study, the extraction efficiency and reflection coefficient by a two-dimensional OWC (Oscillating Water Column) WEC (wave energy converter) installed in front of a seawall was investigated for regular/irregular waves. The matched eigenfunction expansion method (MEEM) based on the linear potential theory was applied as an analytical tool. The diffraction problem by the incident wave in the open-chamber and the radiation problem by the oscillating pressure in the closed-chamber were solved to obtain the volume fluxes at the internal free-surface. Applying the volume fluxes into the continuity equation for the airflow in a chamber, we got the oscillating air pressure. The maximum extracted power and corresponding reflection coefficient were determined at the optimal turbine coefficient that maximizes the extracted power. OWC device designed for a high extracted efficiency simultaneously contributes to reduce reflected waves.

• Journal of Korea Water Resources Association
• /
• v.31 no.4
• /
• pp.439-448
• /
• 1998

There are many methods to calculate steady-state flowrate in a large water distribution system. Linear method which analyzes continuity equations and energy equations simultaneously is most widely used. Though it is theoretically simple, when it is applied to a practical water distribution system, it produces a very sparse coefficient matrix and most of its diagonal elements are to be zero. This sparsity characteristic of coefficient matrix makes it difficult to analyze pipe flow using the linear method. In this study, a graph theory is introduced to water distribution system analysis in order to prevent from producing ill-conditioned coefficient matrix and the technique is developed to produce positive-definite matrix. To test applicability of developed method, this method is applied to 22 pipes and 142 pipes system located nearby Taegu city. The results obtained from these applications show that the method can calculate flowrate effectively without failure in converage. Thus it is expected that the method can analyze steady state flowrate and pressure in pipe network systems efficiently. Keywords : pipe flow analysis, graph theory, linear method.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2008.10a
• /
• pp.41-46
• /
• 2008

After choosing twenty sluice culverts located at national rivers by detailed appearance evaluation, hydraulic response test and acoustic televiewer in addition to surface geophysical explorations were carried out to investigate the cavities which exist at the boundary of sluice culvert and ground. Tapping, GPR, 3-D resistivity surveys and acoustic televiewer imagery obtained successful results in limited conditions according to characteristics of the sites. On the other hand, hydraulic response test successfully detected cavity existing at the lower part of sluice culvert and its continuity. However, hydraulic response test can not supply the quantitative informations on the scale and the shape of cavity. Thus it is very important for accurate investigation to make comprehensive interpretation after supplying various surveys proper to site characteristics.

• Journal of Digital Convergence
• /
• v.14 no.12
• /
• pp.451-456
• /
• 2016

Scanimation is utilized in various fields due to its simple and easy basic principle, whereas mostly it is expressed in gray scale, and the cases of expressing with color is rare. This research classified scanimation into form change of the images with no connectivity, continuous motion of the images with connectivity, and optical illusion with continuity along with visualization effect based on the advanced research and utilization case, and conducted a comparative analysis of scanimation per type applied with color scheme by color difference based on PCCS(Practical Color Co-ordinate System) system. Based on this research, the researcher intended to suggest various direction and expressive method of scanimation using color, expecting the research result could be a valuable reference for the researches utilizing scanimation, henceforth.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.45 no.5
• /
• pp.103-110
• /
• 2008

A reliable extraction of welded area is the precedent task before the detection of weld defects in industrial radiography. This paper describes an attempt to detect and extract the welded features of steel tubes from the computed radiography(CR) images. The statistical properties are first analyzed on over 160 sample radiographic images which represent either weld or non-weld area to identify the differences between them. The analysis is then proceeded by pattern classification to determine the clustering parameters. These parameters are the width, the functional match, and continuity. The observed weld image is processed line by line to calculate these parameters for each flexible moving window in line image pixel set. The local statistic line-clustering method is used as the classifier to recognize each window data as weld or non-weld cluster. The sequential procedure is to track the edge lines between two distinct regions by iterative calculation of threshold, and it results in extracting the weld feature. Our methodology is concluded to be effective after experiment with CR weld images.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.1057-1060
• /
• 2008

For high performance concrete, due to its low water cement ratio (water binder ratio) and addition of mineral admixtures, pretty high autogenous shrinkage and thermal deformation occur at very early age of casting (especially before hardening). This may lead to early age cracking of HPC structures, and then may influence the durability of HPC. This paper has monitored the early age properties of HPC successfully by embedded FBG strain sensor. The results showed that the deformation increased rapidly within the first day after HPC casting. And its value is up to $85{\mu}{\varepsilon}$, which is the 30% of two-month deformation ($280{\mu}{\varepsilon}$). Considering the durability and permeability of HPC, the first-day deformation is pretty high and can not be neglected. Also the superior capability of FBG sensors such as continuity, stability and multiplexed technique etc, has been demonstrated.