• 제목/요약/키워드: k-$\omega$

검색결과 3,473건 처리시간 0.046초

추출용매에 따른 천마 농축액의 리올로지 특성 (Rheological Properties of Gastrodiae Rhizoma Concentrates by Extraction Solvents)

  • 이부용;이옥환;김경임
    • 한국식품과학회지
    • /
    • 제35권2호
    • /
    • pp.188-194
    • /
    • 2003
  • 천마식품가공시 기초자료로 활용될 수 있는 천마 추출농축액의 리올로지 특성을 조사하였다. 천마의 열수 및 50% 에탄올 추출물운 각각 5, 10, 15, 및 20 Brix와 10, 20, 30, 40 및 50 Brix로 농축하여 제조하였다. 열수 및 50% 에탄올 농축액의 정상유동특성과 동적점탄성을 조사하였다. Power law model로 구한 n에 의하면 모든 열수 농축액들은 전형적인 의가소성$(n=0.484{\sim}0.802)$유체의 흐름특성을 보였고, 50% 에탄올 농축액들은 뉴튼유체$(n=0.875{\sim}1.078)$에 가까운 흐름특성을 나타내었다. 열수 및 50% 에탄올 농축액의 ${\eta}_{app}$는 온도가 증가함에 따라 감소하는 경향을 나타내었다. Herschel-Bulkley model에 의한 열수 및 50% 에탄올 농축액의 C는 각각 $0.030{\sim}1.255$ Pa와 $0.007{\sim}0.065$ Pa이었다. ${\eta}_{app}$에 대한 온도 및 농도의 영향은 arrhenius식으로 해석하였다. 열수 및 50% 에탄올 농축액의 $E_a$는 농도가 증가함에 따라 각각 $3.340{\sim}4.620{\times}10^3\;J/mol{\cdot}kg$$1.6289{\sim}18.6699{\times}10^3\;J/mol{\cdot}kg$의 범위로 나타났다. 진동수(angular frequency, ${\omega}$)가 증가할수록 저장탄성률(storage modulus, G#)과 손실탄성률(loss modulus, G@)은 일반적으로 증가하는 경향을 나타냈다. 50% 에탄올 농축액의 경우 모든 진동수에서 G#이 G@보다 높게 나타나 전형적인 저분자용액의 흐름특성을 보였다. 그러나 열수농축액의 경우 G@이 G#보다 높았고 0.5 rad/sec에서 교차점을 형성하였으며 전형적인 고분자 용액의 흐름특성을 나타내었다.

Isolation and Characterization of an Agarase-Producing Bacterial Strain, Alteromonas sp. GNUM-1, from the West Sea, Korea

  • Kim, Jonghee;Hong, Soon-Kwang
    • Journal of Microbiology and Biotechnology
    • /
    • 제22권12호
    • /
    • pp.1621-1628
    • /
    • 2012
  • The agar-degrading bacterium GNUM-1 was isolated from the brown algal species Sargassum serratifolium, which was obtained from the West Sea of Korea, by using the selective artificial seawater agar plate. The cells were Gram-negative, $0.5-0.6{\mu}m$ wide and $2.0-2.5{\mu}m$ long curved rods with a single polar flagellum, forming nonpigmented, circular, smooth colonies. Cells grew at $20^{\circ}C-37^{\circ}C$, between pH 5.0 and 9.0, and at 1-10% (w/v) NaCl. The DNA G+C content of the GNUM-1 strain was 45.5 mol%. The 16S rRNA sequence of the GNUM-1 was very similar to those of Alteromonas stellipolaris LMG 21861 (99.86% sequence homology) and Alteromonas addita $R10SW13^T$(99.64% sequence homology), which led us to assign it to the genus Alteromonas. It showed positive activities for agarase, amylase, gelatinase, alkaline phosphatase, esterase (C8), lipase (C14), leucine arylamidase, valine arylamidase, ${\alpha}$-chymotrypsin, acid phosphatase, naphthol-AS-BI-phosphohydrolase, ${\alpha}$-galactosidase, ${\beta}$-galactosidase, ${\beta}$-glucosidase, catalase, and urease. It can utilize citrate, malic acid, and trisodium citrate. The major fatty acids were summed feature 3 (21.5%, comprising $C_{16:1}{\omega}7c/iso-C_{15:0}$ 2-OH) and C16:0 (15.04%). On the basis of the variations in many biochemical characteristics, GNUM-1 was considered as unique and thus was named Alteromonas sp. GNUM-1. It produced the highest agarase activity in modified ASW medium containing 0.4% sucrose, but lower activity in rich media despite superior growth, implying that agarase production is tightly regulated and repressed in a rich nutrient condition. The 30 kDa protein with agarase activity was identified by zymography, and this report serves as the very first account of such a protein in the genus Alteromonas.

Ampoule-tube 법을 이용한 P와 As 도핑 p형 ZnO 박막의 미세구조와 Hall 특성 (Microstructures and Hall Properties of p-type Zno Thin Films with Ampouele-tube Method of P and As)

  • 소순진;임근영;유인성;박춘배
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
    • /
    • pp.141-142
    • /
    • 2005
  • To investigate the ZnO thin films which is interested in the next generation of short wavelength LEDs and Lasers, our ZnO thin films were deposited by RF sputtering system. At sputtering process of ZnO thin films, substrate temperature, work pressure respectively is $300^{\circ}C$ and 5.2 mTorr, and the purity of target is ZnO 5N. The thickness of ZnO thin films was about $1.9{\mu}m$ at SEM analysis after sputtering process. Phosphorus (P) and arsenic (As) were diffused into ZnO thin films sputtered by RF magnetron sputtering system in ampoule tube which was below $5\times10^{-7}$ Torr. The dopant sources of phosphorus and arsenic were $Zn_3P_2$ and $ZnAs_2$. Those diffusion was perform at 500, 600, and $700^{\circ}C$ during 3hr. We find the condition of p-type ZnO whose diffusion condition is $700^{\circ}C$, 3hr. Our p-type ZnO thin film has not only very high carrier concentration of above $10^{19}/cm^3$ but also low resistivity of $5\times10^{-3}{\Omega}cm$.

  • PDF

TFT-LCD bus line을 위한 Al-W 박막 특성에 관한 연구 (The characteristics of AlW thin film for TFT-LCD bus line)

  • Dong-Sik Kim;Chong Ho Yi;Kwan Soo Chung
    • 한국진공학회지
    • /
    • 제9권3호
    • /
    • pp.233-236
    • /
    • 2000
  • TFT-LCD(thin film transistor-liquid crystal display) 패널의 데이터 배선 재료로 사용하기 위하여 AlW(3 wt%)의 Al합금 박막을 dc 마그네트론 스퍼터링 방법으로 유리 기판에 증착하여 열처리전과 열처리 후의 박막 특성을 조사하였다. 또한 TFT-LCD의 식각 공정상에서 발생할 수 있는 chemical attack에 대한 저항성을 확인하기 위하여 순환전압전류법(cyclic voltammetry)을 사용하여 Ag/AgCl 전극에 대한 ITO와 AlW alloy의 전극 전위를 측정하였다. 증착된 박막을 $350^{\circ}C$에서 20분간 열처리하였을 때 AlW 박막은 비저항이 감소하였고 약 $11\;{\mu\Omega}cm$의 다소 높은 비저항 특성을 보였다. 주사전자현미경(SEM)과 원자힘현미경(AFM)으로 표면을 분석한 결과 좋은 힐록방지 특성을 보임을 알 수 있었다. 순환전압전류법을 사용하여 측정한 Ag/AgCl 에 대한 ITO의 전극 전위은 약 -1.8V이었고, AlW alloy의 전위 전극은 W의 wt.%가 3% 이상이었을 때, ITO의 전극 전위보다 작게 나타났다. 따라서 측정된 특성 값을 볼 때 AlW(over 3 wt.%) 박막은 data bus line으로 사용할 수 있는 것으로 나타났다.

  • PDF

Zinc tin oxide 비정질 산화물 반도체 박막에 대한 Ga 도핑 영향

  • 김혜리;김동호;이건환;송풍근
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2009년도 제38회 동계학술대회 초록집
    • /
    • pp.198-198
    • /
    • 2010
  • 산화물 반도체는 넓은 밴드갭을 가지고 있어 가시광에서 투명하며 높은 이동도로 디스플레이 구동 회로 집적에 유리하다. 또한 가격 및 공정 측면에서도 기존의 Si 기판 소자에 비해 여러 장점을 가지고 있어 차세대 디스플레이의 핵심 기술로 산화물반도체에 대한 관심이 높아지고 있다. 본 연구는 RF 동시 스퍼터링법을 이용하여 Zn-Sn-O 박막을 제조하고, 그 전기적, 광학적, 구조적 특성에 대해 조사하였다. 일정한 증착 온도($100^{\circ}C$)에서 ZnO와 $SnO_2$ 타켓의 인가 파워를 조절하여 Sn/(Zn+Sn) 성분비가 약 40~85%인 Zn-Sn-O 박막을 제조하였다. Sn 함량이 증가할수록 박막의 비저항은 약 $2{\times}10^{-1}$ (Sn 45%)에서 약 $2\;{\times}\;10^{-2}\;{\Omega}{\cdot}cm$ (Sn 67%)까지 감소하다가 다시 증가하는 경향을 보였다. 이 때 캐리어 농도는 $3\;{\times}\;10^{18}$에서 $4\;{\times}\;10^{19}\;cm^{-3}$으로 증가하였으며, 이동도는 11에서 $8\;cm^2/V{\cdot}s$로 약간 감소하였다. XRD분석결과, 제조된 모든 Zn-Sn-O 박막은 비정질 구조를 가짐을 확인하였다. 투과율은 박막 내 Sn함량 증가에 따라 감소하나 모든 시편이 약 70%이상의 투과도를 나타내었다. Zn-Sn-O 박막의 Ga 도핑 영향을 확인하기 위해 ZnO 타켓 대신 갈륨이 5.7 wt.% 도핑된 GZO 타켓을 사용하여 동일한 공정조건에서 박막을 제조하였다. Ga이 첨가된 Zn-Sn-O 박막은 구조적 특성과 광학적 특성에서는 큰 차이를 보이지 않았으나, 전기적 특성의 뚜렷한 변화가 관찰되었다. Sn 함량이 45%인 Zn-Sn-O 박막의 경우, 캐리어 농도가 $3.1\;{\times}\;10^{18}$에서 Ga 도핑 효과로 인해 $1.7\;{\times}\;10^{17}\;cm^{-3}$으로 크게 감소하고 이동도는 11에서 $20\;cm^2/V{\cdot}s$로 증가하였다. 따라서 본 연구는 Zn-Sn-O 비정질 박막에 Ga을 도핑함으로써 산화물 반도체재료로서 요구되는 물성을 만족시킬 수 있다는 가능성을 제시하였다.

  • PDF

도금 공장의 화재 예방을 위한 도금장비 개선에 관한 연구 (A Study on improvement of plating equipment for fire prevention)

  • 김성재;김성곤;유우식
    • 대한안전경영과학회지
    • /
    • 제19권4호
    • /
    • pp.35-42
    • /
    • 2017
  • A number of plating companies have been exposed to the risk of fire due to unexpected temperature increasing of water or other reasons in a plating bath. Since the companies are not able to forecast the unexpected temperature increasing of plating bath and most of raw materials in the bath have low ignition temperature, it is easy to be exposed to the risk of fire. Thus, in previous study, we tried to monitor and notice the dangerous change of temperature of water immediately to prevent the risk of fire from plating process. However, unfortunately previous studies were not able to shut out the fundamental cause of fire since bath temperature sensor can detect air temperature when the level sensor was malfunctioned. In this paper we developed the Teflon heater which contains a built in temperature sensor and improved plating equipment system. Teflon heater is improved using Pt $100{\Omega}$ sensor which can detect until $600^{\circ}C$. When the bath temperature sensor detects over $60^{\circ}C$ or the Teflon heater sensor detects over $240^{\circ}C$ they temporarily shut down the heater to control temperature. Also relay completely shuts down main power when detects instant temperature is detected over 5% of $240^{\circ}C$ by the heater sensor to prevent teflon melting down and fire spreads. Developed plating equipment system can monitor a real time temperature in the teflon tube and bath water. Therefore we think the proposed plating equipment can eliminate the possibility of fire in plating processes fundamentally.

열교환기 내부 유로 종횡비 변화에 따른 국소 열/물질전달 특성 고찰 (Effects of Aspect Ratio on Local Heat/Mass Transfer in Wavy Duct)

  • 장인혁;황상동;조형희
    • 설비공학논문집
    • /
    • 제17권6호
    • /
    • pp.569-580
    • /
    • 2005
  • The present study investigates the convective heat/mass transfer characteristics in wavy ducts of a primary surface heat exchanger. The effects of duct aspect ratio and flow velocity on the heat/mass transfer are investigated. Local heat/mass transfer coefficients on the corrugated duct sidewall are determined using a naphthalene sublimation technique. The aspect ratios of the wavy duct are 7.3, 4.7 and 1.8 with the corrugation angle of $145\Omega$. The Reynolds numbers, based on the duct hydraulic diameter, vary from 300 to 3,000. The results show that at the low Re(Re $\leq$ 1000) the secondary vortices called Taylor-Gortler vortices perpendicular to the main flow direction are generated due to effect of duct curvature. By these secondary vortices, non-uniform heat/mass transfer coefficients distributions appear. As the aspect ratio decreases, the number of cells formed by secondary vortices are reduced and secondary vortices and comer vortices mix due to decreased aspect ratio at Re$\leq$1000. At Re >1000, the effects of corner vortices become stronger. The average Sh for the aspect ratio of 7.3 and 4.7 are almost same. But at the small aspect ratio of 1.8, the average Sh decreases due to decreased aspect ratio. More pumping power (pressure loss) is required for the larger aspect ratio due to the higher flow instability.

정상 망막과 변성 망막을 위한 전기자극 파라미터 (Electrical Stimulation Parameters in Normal and Degenerate Rabbit Retina)

  • 진계환;구용숙
    • 한국의학물리학회지:의학물리
    • /
    • 제19권1호
    • /
    • pp.73-79
    • /
    • 2008
  • 망막색소변성(retinitis pigmentosa: RP)과 연령 관련 황반변성(age-related Macular Degeneration: AMD)은 망막변성으로 인해 실명에 이르는 대표적인 질환이며 망막이식장치의 개발을 통해 치료될 수 있다고 간주되고 있다. 최근에 국내에서도 망막이식장치 개발을 위한 연구팀이 조직되었다. 성공적인 망막이식장치 개발을 위하여 여러 가지 선결요소가 필요하지만 그 중 한 가지가 이식장치에 인가할 전기자극을 최적화하는 것이다. 변성망막의 전기적 특성은 정상 망막과 다르리라 예측되므로 우리는 장차 개발될 망막 이식장치에 인가할 전기자극 최적화를 위한 가이드라인을 제공하기 위해 정상 망막과 변성 망막의 전압자극 파라미터에 관한 실험을 하였다 망막을 분리한 후 망막절편을 신경절세포 층이 다채널전극의 표면을 향하게 하여 전극에 붙인다 in-vitro 상태에서 망막 신경절세포의 전기신호를 기록하기 위해 전극 직경: $30{\mu}m$, 전극간 거리: $200{\mu}s$, 전극 임피던스 1kHz 에서 $50k{\Omega}$인 8행 8열의 다채널전극을 사용하였다. 다채널전극의 60채널 중 두 채널을 자극전극과 접지로 사용하여 단극전기자극을 인가하였고 나머지 전극을 기록전극으로 사용하였다. 가한 전기자극은 전압자극으로 전하균형을 맞춘 이상성자극을 아노딕 사각파를 먼저 주고 캐쏘딕 사각파가 나중에 나오는 형태로 두 사각파간의 지체는 없도록 하였으며 동일한 자극을 2초 간격으로 50회 반복하여 인가하였다. 다양한 전기자극을 사용하였는 바 첫째는 사각파의 크기를 달리하였다 $(0.5{\sim}3V)$. 둘째는 사각파의 시간을 달리하였다 $(100{\sim}1,200{\mu}s)$. 전하밀도는 옴의 법칙과 쿨롱의 법칙을 이용하여 계산하였다. 전기자극으로 유발된 반응은 50회 자극에 대한 평균치를 얻은 후 자극 후 히스토그램(PSTH)을 그려 분석하였다. 전압자극의 크기를 $0.5{\mu}3V$로 달리하였을 때 믿을 만한 망막신경절세포가 유발되는 자극은 1.5V이었고 이때 계산된 전하밀도의 역치는 $2.123mC/cm^2$이었다. 전압의 크기를 2V로 고정하고 자극 지속시간을 $100{\sim}1,200{\mu}s$로 달리하였을 때 믿을 만한 망막신경절세포가 유발되는 자극의 역치는 $300{\mu}s$에서 관찰되었다. 이때 계산된 전하밀도의 역치는 $1.698mC/cm^2$이었다. L-(1)-2-amino-4-phosphonobutyric acid (APB)을 사용하여 ON-경로를 차단한 후에 전기자극을 인가하였을 때도 자극에 의해 망막신경절 세포의 반응이 유발되는 것을 확인하였다. APB-변성망막에서 전압의 크기를 2V로 고정하고 자극 지속시간을 $100{\sim}1,200{\mu}s$로 달리하였을 때 믿을 만한 망막신경절세포가 유발되는 자극의 역치는 $300{\mu}s$에서 관찰되었으며 이는 정상망막의 결과와 같았다. 추후 APB-변성망막을 가지고 좀더 실험이 진행되어야 정상망막과 변성망막의 전하밀도에 관한 명료한 비교가 가능할 것이다.

  • PDF

흰쥐에서 급성심근경색 3일 후 흉부 대동맥 혈관 반응성의 변화 (The Change of Vascular Reactivity in Rat Thoracic Aorta 3 Days after Acute Myocardial Infarction)

  • 이섭;노운석;장재석;배지훈;박기성;이종태
    • Journal of Chest Surgery
    • /
    • 제42권5호
    • /
    • pp.576-587
    • /
    • 2009
  • 배경: Nitric oxide (NO)-cGMP 신호전달체계의 상향 조절(up-regulation)이 급성심근경색 3일 후 흰쥐의 혈관반응성의 변화에 관여한다고 알려져 있으나 그 기전에 대해서는 명확히 규명되지 않았다. 대상 및 방법: 좌전하행관상동맥을 30분간 폐쇄한 후 급성심근경색을 유도한 군을 AMI군으로, 동일한 모의 수술(sham operation)을 하였으나 관상동맥을 폐쇄하지 않은 군을 SHAM군으로 하였다 AMI 혹은 SHAM수술 3일 후 흰쥐의 대동맥 고리절편(내피를 보존한 대동맥 절편을 E(+), 내피를 제거한 대동맥 절편을 E(-))에서 phenylephrine (PE), KCl, acetylcholine (Ach) 및 sodium nitroprusside (SNP)에 대한 농도-반응 관계를 측정하였다 AMI군의 E(+) 대동맥 절편에서 PE의 농도-반응 관계를 NO synthase (NOS) 억제제인 $N{\omega}$-nitro-L-arginine methyl ester (L-NAME)와 cyclooxygenase 억제제인 indomethacin으로 각각 전처치한 대동맥 절편과 비교하였다. 혈장 nitrite/nitrate 농도는 Griess reaction으로 측정하였고, 방사면역 분석법을 이용한 흉부 대동맥 절편의 cGMP정량과 real time PCR을 이용한 endothelial nitric oxide synthase (eNOS) mRNA 발현양상 측정을 하였다. 결과: AMI군에서의 심근경색의 평균 크기는 $21.3{\pm}0.62%$였다. AMI군에서 심박수와 수축기 및 이완기 혈압은 의미있는 변화가 없었다. E(+)와 E(-) 대동맥 절편에서 PE와 KCl에 대한 수축반응의 민감도는 AMI군 대동맥 절편에서 의미 있게 감소하였다(p<0.05). L-NAME은 이러한 수축반응을 완전하게 역전시켰으나 indomethacin은 효과가 없었다(p<0.05). 또한 AMI군에서 Ach에 대한 이완반응의 민감도가 의미 있게 감소하였다(p<0.05). AMI군에서 SHAM군에 비해 혈장 nitrite/nitrate 농도(p<0.05), 기저 cGMP 농도(p<0.05), 및 eNOS mRNA 발현양상(p=0.056)이 증가하였다. 결론: 이상의 결과들로 보아 eNOS의 발현 증가와 NO-cGMP 신호전달체계의 상향조절이 급성심근경색 3일 후 흰쥐 흉부대동맥에서의 수축 및 이완 반응성 감소의 원인으로 생각된다.

울릉도 거북바위 조수웅덩이에서 분리된 해양 미세조류 옥세노클로렐라 프로토테코이드 균주의 기술 및 응용 (Description and Application of a Marine Microalga Auxenochlorella protothecoides Isolated from Ulleung-do)

  • 장형석;강남선;김경미;전병희;박준상;홍지원
    • 생명과학회지
    • /
    • 제27권10호
    • /
    • pp.1152-1160
    • /
    • 2017
  • 단세포 녹조류 균주를 경상북도 울릉군 울릉도 거북바위 주변 조수웅덩이로부터 순수분리하여 형태적, 분자적, 및 생화학적 특성을 분석한 결과 옥세노클로렐라 프로토테코이드에 속하는 것으로 밝혀졌다. 본 종은 현재까지 한국에서 공식 기록이 없는 미기록종으로 옥세노클로렐라 프로토테코이드 MM0011 균주라고 명명하였으며, 생장, 지질/광합성 색소 조성 및 바이오매스 특성에 대해 조사를 실시하였다. 분리균주는 광범위한 온도($5-35^{\circ}C$)에서 생장할 수 있었으며 1.5 M 염화나트륨 농도까지 생존할 수 있었다. 가스크로마토그래프/질량분석기를 이용한 분석 결과, 본 균주에는 영양적으로 중요한 불포화지방산이 풍부한 것으로 나타났으며, 특히 리놀네산(27.6%) 및 알파 리놀렌산(37.2%)이 주요 지방산 성분으로 확인되었다. 따라서 본 토착 미세조류 균주는 어유 또는 식물성유를 대체할 수 있는 잠재적인 오메가-3 및 오메가-6 불포화지방산 원료가 될 수 있을 것으로 사료된다. 또한, 고부가가치 항산화 물질인 루테인이 보조색소로서 본 균주에 의해 생합성 되는 것으로 밝혀졌다. 일반성분분석 결과 MM0011 균주의 휘발성물질 함량은 85.6%였으며, 원소분석 결과 총 발열량은 $20.3MJ\;kg^{-1}$으로 나타났다. 또한 배지로부터 40.5%의 전질소와 27.9%의 전인을 각각 제거할 수 있어 향후 바이오연료 원료물질 생산과 오 폐수처리를 연계할 수 있는 가능성 역시 제시하였다. 추가적으로 MM0011 바이오매스는 높은 단백질 함량(51.4%)을 갖고 있어 우수한 동물사료의 원료가 될 수 있는 가능성도 보여주고 있다. 따라서, 본 균주는 미세조류 기반 생화학 물질 생산 및 바이오매스 원료로서 상업적인 이용 가능성이 높음을 시사한다.