• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1002-1008
• /
• 2011

Turnout is a mechanical installation enabling railway trains to be guided from one track to another at a railway junction. there are classified variously according to rail type, sleeper type, fastening system, track type. Construction of concrete track are on the increase recently to secure the safety of track structure as well as to reduce the maintenance cost. SFC fastening system used the plain track a lot and for those reasons, The fast clip turnout demand growing to improving efficiency of the maintenance cost by unification of fastening clip on whole line. in this study is about development of the fastening system for new turnout using fast clip. this fastening system assembled elasticity pad underneath a base plate. its can change stiffness how to adjust contact surface area of elasticity pad Developed fastening system have passed test according to rule of KRS-TR0014-09R (rail fastening system) and Performance Certification by KR.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.297-298
• /
• 2009

대부분의 반도체 소자의 고장 원인은 85%정도가 열로 인한 것이며, 고출력 LED는 인가된 에너지의 20%정도의 광으로 출력되며 나머지 80%가 열로 전환된다. 본 논문에서는 PMS-50과 KEITHLEY 2430을 이용하여 PCB 구조와 Via hole 구성에 따른 LED 패키지의 열적 광학적 특성을 분석하였다. 0.6mm의 Via hole을 가진 FR4 PCB의 열특성이 가장 우수하였으며, Via hole 0.6mm FR4 PCB의 경우 McPCB에 상응하는 광출력 특성을 보였다.

• 한국세라믹학회지
• /
• 제29권4호
• /
• pp.273-282
• /
• 1992

The effects of intrinsic and extrinsic gettering on the formation of microdefects in the wafer and on the electrical performance at near-surfaces of three different oxygen-bearing Czochralski silicon single crystal wafers were investigated by varying the combinations of the pre-heat treatments and the phosphorus diffusion through the back-surface of the wafers. The wafers which had less than 10.9 ppma of oxygen formed no gettering zones irrespective of any pre-heat treatments, while the wafers which had more than 14.1 ppma of oxygen and were treated by Low+High pre-heat treatments generated the gettering zone comprising oxygen precipitates, staking faults, and dislocation loops. The effects of extrinsic gettering by phosphorus diffusion were evident in all samples such that the minority carrier lifetimes were increased and junction leakage currents were decreased. However, the total gettering effects among the different pre-heat treatments did not necessarily correspond to the gettering structure revealed by synchrotron radiation section topograph.

• 전기화학회지
• /
• 제13권1호
• /
• pp.10-18
• /
• 2010

Nanostructured metal oxides have been widely used in the research fields of photoelectrochemistry, photochemistry and opto-electronics. Dye-sensitized solar cell is a typical example because it is based on nanostructured $TiO_2$. Since the discovery of dye-sensitized solar cell in 1991, it has been considered as a promising photovoltaic solar cell because of low-cost, colorful and semitransparent characteristics. Unlike p-n junction type solar cell, dye-sensitized solar cell is photoelectrochemical type and is usually composed of the dye-adsorbed nanocrystalline metal oxide, the iodide/tri-iodide redox electrolyte and the Pt and/or carbon counter electrode. Among the studied issues to improve efficiency of dye-sensitized solar cell, nanoengineering technologies of metal oxide particle and film have been reviewed in terms of improving optical property, electron transport and electron life time.

• ETRI Journal
• /
• 제30권3호
• /
• pp.480-482
• /
• 2008

A novel InGaAsP/InP buried-ridge waveguide laser diode structure is proposed and demonstrated for use as a single-mode laser. The lateral mode of the proposed device can be controlled by adjusting the composition and thickness of the InGaAsP layer grown over the active region. Stable single-mode operation without kinks or beam-steering is achieved successfully with lateral and transverse in the junction plane even for the device with the ridge width of 9 ${\mu}m$ up to an injection current of 500 mA.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.187-190
• /
• 1991

The analytical model to investigate the effects of the drift and diffusion carrier transport upon the Hall effect is presented and applied to the general PN junction structure. The diffusion current effect on the Hall coefficient can not be considered in the conventional model, which produces the conversion of the direction of the induced Hall field between measured and calculated values. The proposed analytical model which considers the diffusion current effect provides the coincident results with the previous experimental results.

• Journal of Chest Surgery
• /
• 제17권2호
• /
• pp.292-298
• /
• 1984

Myasthenia 8ravis is a disorder of neuromuscular function due to a reduction of available acetylcholine receptors at the neuromuscular junction. Typically, the muscle weakness is worse after effort and improved by rest. In 1939, Blalock and associated reported a case of patient with myasthenia gravis who was successfully treated by thymectomy. Since then, operation has become increasingly important in the management of this disease. From 1968 to 1983, 10 cases of myasthenia gravis were operated at the Department of Thoracic and Cardiovascular Surgery,College of Medicine, Seoul National University. 1.Among 10 cases, 4 were male and 6 were female. 2.Thymectomy was performed in 9 cases, and 1 case of malignant thymoma with deeply infiltration to adjacent structure was not resectable. 3.There was 1 operative mortality with respiratory failure. 4.During follow-up period, most of them showed symptomatic improvement, but complete remission was not noticed in any case.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1315-1318
• /
• 2004

Nano-scale fabrication of silicon substrate in an aqueous solution based on the use of atomic force microscopy was demonstrated. A specially designed cantilever with diamond tip, allowing the formation of damaged layer on silicon substrate easily by a simple scratching process (Tribo-Nanolithography, TNL), has been applied instead of conventional silicon cantilever for scanning. A slant nanostructure can be fabricated by a process in which a thin damaged layer rapidly forms in the substrate at the diamond tip-sample junction along scanning path of the tip and simultaneously the area uncovered with the damaged layer is being etched. This study demonstrates how the TNL parameters can affect the formation of damaged layer and the shape of 3-D structure, hence introducing a new process of proximal nanolithography in aqueous solution.

• The Korean Journal of Pain
• /
• 제9권2호
• /
• pp.419-422
• /
• 1996

Pain arising from pelvic viscera and perineum is frequently associated with discomfort and disability and caused by local trauma, inflammation and malignancy within the pelvis. Although various interventions have been proposed for the management of intractable perineal pain, their efficacy and applications are limited. The ganglion impar is a solitary retroperitoneal structure located at the level of the sacrococcygeal junction that marks the terminations of sympathetic chains. We propose that blockade of the ganglion impar is an effective method in the management of patient suffered from perianal pain due to advanced rectal cancer.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2000년도 추계학술대회논문집
• /
• pp.17-20
• /
• 2000

This study is about a retrograde triple well employed in the Cell tr. of next DRAM and flash memory. triple well structure is formed deep n-well under the light p-well using MeV ion implantation. MeV P implanted deep n-well was observed to show greatly improved characteristics of electrical isolation and soft error. Junction leakage current, however, showed a critical behavior as a function of implantation and annealing conditions. {311} defects were observed to be responsible for the leakage current. {311} defects were generated near the R$\sub$p/ (projected range) region and grown upward to the surface during annealing. This is study on the defect behavior in device region as a function of implantation and annealing conditions.