• KIEAE Journal
• /
• 제12권4호
• /
• pp.21-30
• /
• 2012

This study aims to set up Energy self-sufficiency urban planning system responding climate change by reducing fossil energy consumption and carbon emission, and to suggest effective application method. This study has 3 levels. First, it defines energy self-sufficient city responding climate change theoretically. Second, it set up planning system of Energy Self-sufficient city responding climate change. Third, ANP method was applied to introduce priority of application according to relative importance of planning section. As ANP method has to construct network to show interrelation among elements, 1st questionnaire survey was carried out to figure out interrelation. 2nd questionnaire survey introduced to judge relative importance of planning aspects and sections. In conclusion, this study shows interrelation among planning sections. By considering the relative importance, Energy environment and Energy consumption was derived as important planning aspects, and Architecture, Landuse, and Production of renewable energy was estimated as s important planning elements.

• 대한조선학회논문집
• /
• 제51권6호
• /
• pp.451-458
• /
• 2014

The purpose of this study is to compare the economics between a diesel propulsion vessel and a LNG fuel propulsion vessel through the analysis of the present value using the LCC(Life Cycle Cost) method. This study is also to judge the economics for long-term operation of a LNG fuel propulsion vessel as a result of analysis about the equivalent uniform annual cost. In particular, LCC method was strengthened by sensitivity analysis based on combined interest rate which is considering discount rate and inflation rate simultaneously.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2011년도 정기 학술발표대회
• /
• pp.91-91
• /
• 2011

The quality of the surface layer in concrete structures plays an important role in the durability of the concrete. The concrete factory products are made as they improve the appearance of the surface and compressive strength in need. A common criterion to judge the quality of concrete products frequently seen in our daily life appears to be "beauty" in terms of consistent shaping. However, as for most concrete curb in such areas where a large amount of anti-freezing agents(NaCl) and ice and snow melting agents(CaCl2) are spread over roads to ensure road safety during the winter season, since deterioration advances from the surface, scaling is seen on the surface concrete due to deterioration which combined freezing damage and salt damage. Especially, In cold northern districts, the spreading amount of deicing salts increases by regulation of studded tire use, and the scaling of the concrete products, the various parts of concrete structures for roads is increasing in recent years. In this study, L-shape concrete curb were targeted, the permeable form method with the commercial permeable sheet was applied to it and the improvements of the quality were examined. By the permeable form method, surface layers got strengthened, which prevented permeation of the deterioration factor from the outside, and the scaling resistance of the upper surface where the permeable sheet was applied improved exceedingly. It will be expected by applying the permeable form method to various concrete products that frost resistance improves and scaling damage decreases.

• 한국산업정보학회논문지
• /
• 제11권3호
• /
• pp.59-68
• /
• 2006

Recently, introduction of Open Source Software into informatization of the government and public sector has been actively examined, however, Open Source Software is being rarely adopted due to the lack of verified and reliable data with regard to the criteria, process, performance and stability for introduction of Open Source Software. In this paper, the process, method and plan for performance verification for introduction of Open Source Software into mission critical systems of the government and public sector are suggested in order to solve the aforesaid problem Specially, a test system to judge whether or not to adopt Open Source Software in school affairs system of the NEIS(National Education Information System) of the Korean government was set up, and the method and process of performance verification by stage in addition to feasibility study were applied to the test system for verification. Based on the result of performance evaluation in the test system, the application of Linux to school affairs system of the NEIS is being successfully practiced. It is expected that this study will be a guideline to technical review process and performance verification method as necessary to introduce Open Source Software into the mission critical systems of government and public agencies.

• 전자공학회논문지
• /
• 제52권7호
• /
• pp.77-85
• /
• 2015

본 논문에서는 컬러 패턴의 분해와 가설검정 기법을 이용하여 영상에서 조작된 컬러의 영역을 검출하는 새로운 방법을 제시한다. 디모자이킹으로 보간된 화소는 원 화소보다 적은 분산을 가진다는 것에 착안하여, 통계적 검정을 이용하여 분산의 불일치성을 판단하는 방법을 사용한다. 이를 위해, 컬러 패턴을 각각 디모자이킹 패턴에 따라 분해하는 방법을 도입하여 분산을 계산한다. 또한 보간된 화소와 원 화소의 분산의 차이를 크게 하기 위하여 고역통과 필터링을 적용한다. 실험 결과를 통하여 제안 방법이 컬러 조작 영역을 찾는데 매우 유효하며 기존 방법과 비교하여 우수한 검출 성능을 보이는 것을 확인 할 수 있었다.

• Smart Structures and Systems
• /
• 제2권2호
• /
• pp.189-208
• /
• 2006

Monitoring large-scale civil engineering structures such as offshore platforms and high-large buildings requires a large number of sensors of different types. Innovative sensor data information technologies are very extremely important for data transmission, storage and retrieval of large volume sensor data generated from large sensor networks. How to obtain the optimal sensor set and placement is more and more concerned by researchers in vibration-based SHM. In this paper, a method of determining the sensor location which aims to extract the dynamic parameter effectively is presented. The method selects the number and place of sensor being installed on or in structure by through the tolerance domain statistical inference algorithm combined with second order sensitivity technology. The method proposal first finds and determines the sub-set sensors from the theoretic measure point derived from analytical model by the statistical tolerance domain procedure under the principle of modal effective independence. The second step is to judge whether the sorted out measured point set has sensitive to the dynamic change of structure by utilizing second order characteristic value sensitivity analysis. A 76-high-building benchmark mode and an offshore platform structure sensor optimal selection are demonstrated and result shows that the method is available and feasible.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제17권2호
• /
• pp.644-662
• /
• 2023

There are still outbreaks of COVID-19 across the world. Ships increase the risk of worldwide transmission of the virus. Close contact tracing remains as an effective method of reducing the risk of virus transmission. Therefore, close contact tracing in ship environments becomes a research topic. Exposure Notifications API (Application Programming Interface) can be used to determine the encountered location points of close contacts on ships. Location points of close contact are estimated by the encountered location points. Risky areas in ships can be calculated based on the encountered location points. The tracking of close contacts is possible with Bluetooth technology without the Internet. The Bluetooth signal can be used to judge the proximity among detecting devices by using the feature that Bluetooth has a strong signal at close range. This Bluetooth feature makes it possible to trace close contacts in ship environments. In this paper, we propose a method for close contact tracing and showing the risky area in a ship environment by combining beacon and Exposure Notification API using Bluetooth technology. This method does not require an Internet connection for tracing close contacts and can protect the personal information of close contacts.

• 산업경영시스템학회지
• /
• 제46권3호
• /
• pp.101-108
• /
• 2023

Although the proportion of coal-fired power generation is decreasing, efficient operating technology is needed to continuously invest in facilities and reduce maintenance costs until it is abolished. Boilers, one of the main facilities of power plants, operate for a long time in harsh environments of high temperature and high pressure. In addition, damage due to deterioration is likely to occur depending on the fuel and tube material used. It is very important to judge soundness because damage caused by deterioration adversely affects facility operation. Previously, replication method was used to analyze the progress of deterioration. In the replication method, pre-treatment such as chemical treatment is performed on the boiler tube in the field, the area is reproduced by attaching a film, and the replicated film is determined by an expert in the laboratory with an expensive microscope. However, this method involves substantial costs and time requirements, as well as the possibility of human errors. To address these issues, we developed a mobile health assessment system in this research. Since it is detachable and takes images in real time, this system enables swift evaluations across a broad range and facilitates the assessment of preprocessing quality. In addition, it was intended to reduce existing human mistakes by developing a degradation classification algorithm using the merger cluster method.

• 대한인간공학회지
• /
• 제31권1호
• /
• pp.77-83
• /
• 2012

Objective: The aim of this paper is to introduce a method that can measure and analyze the judgment gaps between service providers and customers. Background: It is important to understand the good service that service providers and customers are thinking. If there is judgment gap between service providers and customers, it would cause an unsatisfactory service. The judgment gap should be thoroughly investigated for a good service design. Method: Lens model is a human decision making model that was proposed by Brunswick(1952). This study indicates whether the Lens model can be applied to analyze judgment gaps between service providers and customers. As a case study, a library lending service was selected. 5 librarians and 15 customers participated in the experiment that investigates their judgments on a good service. The obtained data were analyzed by a modified lens model. Results: Cue weighting policies of consumers and service providers were similar, except that consumers gave higher weight on tangibility than service providers. Service providers and consumers had a good knowledge on the service quality, but they could not well apply the knowledge to judge it. Conclusion: The lens model may be used to analyze judgment gaps between service providers and consumers in the other service areas. The decision cues that were used in this study can be changed, depending on the characteristics of the target service. Application: The method that is proposed in this study may help to investigate and analyze both consumers' and service providers' judgments on a variety of services.

• 한국정밀공학회지
• /
• 제22권9호
• /
• pp.85-92
• /
• 2005

This paper describes the recognition method of small-obstacles using a camera for a mobile robot in indoor environment. The technique of image processing using a camera has been widely used for an automaton of industrial system, an inspection of inferior goods, a lookout of an invader, and a vision sensor of intelligent robot. Mobile robot could meet small-obstacles such as a small plastic bottle of about 0.5 l in quantity, a small box of $7{\times}7{\times}7cm^3$ in volume, and so on in its designated path, and could be disturbed by them in the locomotion of a mobile robot. So, it is necessary to research on the recognition of small-obstacles using a camera and program. In this paper, 2-D image processing algorism and method fur recognition of small-obstacles using a camera for a mobile robot in indoor environment was developed. The characteristic test of the developed program to confirm the recognition of small-obstacles was performed. It is shown that the developed program could judge the size and the position of small-obstacles accurately.