• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.105-108
• /
• 2005

In damage investigation of building structures suffering from earthquake, estimation of residual seismic capacity is essential in order to access the safety of the building against aftershocks and to judge the necessity of repair and restoration. It has been proposed that an evaluation method for post-earthquake seismic capacity of reinforced concrete buildings based. on the residual energy dissipation capacity (the residual seismic capacity ratio )in lateral force-displacement curve of structural members. The proposed method was adopted in the Japanese 'Damage Level Classification Standard' revised in 200l. To evaluate the residual seismic capacity of RC column, experimental tests with positive and negative cyclic loading was carried out using RC building column specimen. Parameters used by the experiment are deformability and member proportion. From the test results, it is appropriated that the residual seismic capacity of RC buildings damaged by earthquakes is evaluated using the method in the Guideline.

• 동력기계공학회지
• /
• 제12권5호
• /
• pp.65-70
• /
• 2008

The purpose of this study is to verify availability of the acoustic emission in-situ monitoring method to the internal leak and operating conditions of the turbine major valves relating to safety for turbine operating and prevention of turbine trouble at nuclear power plants. In this study, acoustic emission tests are performed when the pressurized electro-hydraulic control oil flowed through turbine electro-hydraulic controller oil check valve and turbine power/trip fluid solenoid valve in the condition of actual turbine operating. The acoustic emission method was applied to the valves at the site, and the background noise was measured far the abnormal plant condition. To judge for the leak existence ell the object valves, voltage analysis and frequency analysis of acoustic signal emitted from infernal leak in the valve operating condition are performed. It was conformed that acoustic emission method could monitor for valve internal leak to high sensitivity.

• Architectural research
• /
• 제17권3호
• /
• pp.83-91
• /
• 2015

A comprehensive understanding of functions and performances enables a selection of appropriate alternatives to the existing design and can prevent defective design. A performance-based design quality management can ensure successful project completion. This study proposes a new model for design quality management in order to prevent defective design and to minimize design change. The new quality management model defines the requirement about function and performance based on technical characteristic, and assesses suitability for design alternatives. This study attempts to propose a quality matrix assessment method that can compare the alternative design and requirements defined with the new quality management model. This method can judge conformity and suitability of design quality in accordance with the requirements configured.

• 조명전기설비학회논문지
• /
• 제28권4호
• /
• pp.70-79
• /
• 2014

In this paper, I propose a method for detection of look-alike offenders by using hidden face information. For extraction of moving objects, PRA matching is used to extract moving components, and brightness changes can be dealt with by an adaptive threshold adjusting in the proposed method. Moving objects extracted in the territory of the face region is extracted using the complexion, facial area, eyes, nose, mouth. The extracted information detected by the presence of these characteristics were likely to help judge a person. Results of the extracted face makes the recognition rate of possible murderers 90% so the usefulness of the proposed method was confirmed.

• Industrial Engineering and Management Systems
• /
• 제1권1호
• /
• pp.93-98
• /
• 2002

It is important to evaluate the performance of candidates mathematically from various aspects, and reflect it on decision making. In decision making, we judge the candidates through two steps, classification of objects and comparison of objects or candidates with plural elements. In the former step, Analytic Hierarchy Process (AHP) is useful method to evaluate candidates from plural viewpoints, and in the later step, Data Envelopment Analysis (DEA) is also useful method to evaluate candidates with plural categorized data. In fact, each candidate has plural elements, nevertheless it has been more important to evaluate from various aspects in IT society. So, we propose a new procedure complementing AHP with DEA.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.552-554
• /
• 2003

This paper is about the method by which Power Control Unit(PCU) of Control Rod Control System(CRCS) logs events in the system and the real-time monitoring display. This method enables the functions like the event logging of Control Rod Drive Mechanism(CRDM)/power Cabinet, the off-line show of the event data logged and the on-line show by communication between the PCU and the monitoring display. Operators in a nuclear power plant must be able to grasp any possible abnormal states correctly. Because our newly designed system has a good ability to log and display the kinds, tine, and the prior and posterior states of urgent or non-urgent events, the operators can judge, maintain and repair the abnormal event more easily.

• 한국식품영양과학회지
• /
• 제27권3호
• /
• pp.471-476
• /
• 1998

The NO3 contents and organophosphorus pesticide residues in edible part of vegetables cultivated by a conventional or an organic farming methods were determined. The NO3 contents of vegetables cultivated by the organic farming method were between 120ppm and 4,523ppm, whereas its contents of vegetables cultivated by the conventional farming method were between 89ppm and 1,575ppm. Fifty two percent of vegetables cultivated by hte organic farming method accumulated NO3 content over than 2,000ppm, whereas 82% vegetables cultivated by the conventional farming method accumulated NO3 content below than 1,000ppm. The NO3 contents of lettuce dependent on the cultivation method obviously. The NO3 contents of lettuce cultivated by a hydroponic farming method were between 4,800 and 6,500ppm, whereas those cultivated by the conventional method were between 630 and 750ppm. The organophosphorus pesticide residues in edible part of vegetables cultivated by the conventional or the organic farming methods were not detected. The NO3 contents in edible part of vegetables cultivated by the organic farming method should be considered as one of several parameters to judge a real safe vegetable to be certified by goverment.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권9호
• /
• pp.1225-1228
• /
• 2006

A total of 1,367 first lactation records of daughters of 81 sires, having 5 or more progeny were used to evaluate sires by 3 different methods viz., least squares (LS), best linear unbiased prediction (BLUP) and derivative free restricted maximum likelihood (DFREML) method. The highest and lowest overall average breeding value of sires for first lactation 305 days or less milk yield was obtained by BLUP (1,520.72 kg) and LS method (1,502.22 kg), respectively. The accuracy, efficiency and stability of different sire evaluation methods were compared to judge their effectiveness. The error variance of DFREML method was lowest ($191,112kg^2$) and its coefficient of determination of fitting the model was highest (33.39%) revealing that this method of sire evaluation was most efficient and accurate as compared to other methods. However, the BLUP method was most stable amongst all the methods having coefficient of variation (%) very near to unadjusted data (18.72% versus 19.89%). The higher rank correlations (0.7979 to 0.9568) between different sire evaluation methods indicated that there was higher degree of similarity of ranking sires by different methods ranging from about 80 to 96 percent. However, the DFREML method seemed to be the most effective sire evaluation method as compared to other methods for the present set of data.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.226-231
• /
• 2011

This research was done to prove the optimal position to detect a train reader when using a multiple fusion sensor. The experiment was done using four Train installed RFID Readers located on the train. These readers were read by sensors installed at intervals of 50 meters on the up and down sections of the Line 8, from Amsa station to Moran station. We analyze errors in the recognition range according to the Tag's number of recognition due to RFID of train speed, and propose a method of estimation for an accurate estimation of the position of train At this the Least-Squares Method is applied to judge the position of train accurately from the error because of Tag's number of recognition and RFID of train speed. also It is verified through simulation.

• 한국산학기술학회논문지
• /
• 제10권2호
• /
• pp.287-293
• /
• 2009

본 논문에서는 RF송신기와 수신기를 통하여 데이터를 통신하고, 수신기에 연결된 PC에 설치된 S/W를 이용하여 사용자 인증을 받는 PC 보안 방법을 제안한다. 기존의 PC보안 방법들은 사용자의 수동적인 움직임을 요구하였지만, 제안하는 방법은 PC 가까이에 태그를 소지한 사용자가 있는지 유무 판단을 하여 자동으로 PC를 보호한다. 또한 위조 변조가 불가능하며, 스니핑 공격과 스푸핑 공격에 대해 안전하며, 오판정율도 다른 시스템에 비해 낮아서 안전하다.