• Polymer(Korea)
• /
• 제39권2호
• /
• pp.329-337
• /
• 2015

In this study, multi-walled carbon nanotubes (MWCNTs) were oxidized with a mixture of nitric acid and sulfuric acid. After oxidation, oxidized MWCNTs were treated with thionyl chloride ($SOCl_2$) and 1,4-butanediol (BD) in sequence at room temperature to introduce hydroxyl groups on the surface of MWCNTs. The prepared MWCNT-OH was silanized with 3-methacryloxypropyltrimethoxylsilane (MPTMS) to make MWCNT-MPTMS. The MWCNT-MPTMS was used as fillers in emulsion polymerization to make MWCNT-MPTMS/PMMA composite particles with 3 kinds of emulsifiers, hexadecyltrimethylammoniumbromide (CTAB) as a cationic, sodium dodecylbenzene sulfonate (SDBS) as an anionic and polyethylene glycol tert-octylphenyl ether (Triton X-114) as a nonionic emulsifier. Morphologies of composite emulsions were confirmed by a particle size analyzer (PSA) and a scanning electron microscope (SEM). Morphologies of emulsion polymerized MWCNT-MPTMS/PMMA with SDBS showed more uniform particle size distribution compared to those of other two emulsifiers used emulsions. MWCNT-MPTMS/PMMA showed $3.4^{\circ}C$ higher $T_g$ compared to pristine MWCNT/PMMA due to covalent bond formation at interface of MWCNT-MPTMS and PMMA.

• Elastomers and Composites
• /
• 제45권2호
• /
• pp.112-121
• /
• 2010

In this study, styrene butadiene rubber(SBR)/organoclay nanocomposites were manufactured using the latex method with 3-aminopropyltriethoxysilane(APTES) as a modifier. The X-ray diffraction(XRD), transmission electron microscopy(TEM) images, Fourier transform infrared(FTIR) spectroscopy, swelling ratio and mechanical properties were measured in order to study the interaction between filler and rubber according to the mixing temperature in the internal mixer. In the case of SBR/APTES-MMT compounds, the dispersion of the silicates within the rubber matrix was enhanced, and thereby, the mechanical properties were improved. The characteristic bands of Si-O-C in APTES disappeared after hydrolysis reaction in the MMT-suspension solution and the peak of hydroxyl group was increased. Therefore the formation of chemical bonds between the hydroxyl group generated from APTES on the silicate surface and the ethoxy group of bis(triethoxysilylpropyl) tetrasulfide(TESPT) was possible. Consequently, the 300% modulus of SBR/APTES-MMT compounds was further improved in the case of using TESPT as a coupling agent. However, the silanization reaction between APTES and TESPT was not affected significantly according to the increase of mixing temperature in the internal mixer.

• Microbiology and Biotechnology Letters
• /
• 제26권4호
• /
• pp.316-322
• /
• 1998

An ${\alpha}$-D-galactosidase (${\alpha}$-D-galactoside galactohydrolase, EC 3. 2. 1. 22) from sunflower seed was purified by affinity chromatography using N-$\varepsilon$-aminocaproyl-${\alpha}$-D-galactopyranosylamine coupled to sepharose and its properties were examined. The specific activity of the purified enzyme, tested with p-nitrophenyl-${\alpha}$-D-galactopyranoside as substrate, was 291.66 units/mg protein, representing an 115-folds purification of the original crude extract. The final preparation obtained from by Sephadex G-25 chromatography showed a single band on SDS-polyacrylamide gel electrophoresis. The molecular weight was determined to be 42,000 by SDS-polyacrylamide gel electrophoresis. The purified galactosidase showed maximum activity at pH 4.5 and 55$^{\circ}C$, and was stable in the pH and temperature ranges of 4.0 to 5.0 and 30 to 55$^{\circ}C$, respectively. The enzyme activity was inhibited by Ag$\^$2+/, Hg$\^$2+/ and Co$\^$2+/. The enzyme activity was not affected considerably by treatment with other metal compounds. The enzyme liberated galactose from melibiose, raffinose, copra galactomannan, guar gum and locust bean gum by TLC, and also the hydrolysis rate of substrate was compared by HPLC.

• Geophysics and Geophysical Exploration
• /
• 제5권1호
• /
• pp.56-63
• /
• 2002

Tracing the history of study, problems of seawater intrusion are commonly investigated with electrical techniques because seawater saturated zone is indicative of the low resistivity anomaly. There we, however, silt and mud layers in the western and southern coastal areas of Korea, so we may make a mistake in case we determine seawater intrusion only with resistivity survey. Hence, reference IP survey was carried out in Kimje, Jeollabuk-Do and Youngkwang, Jeollanam-Do in order to decide whether or not the area is under the influence of seawater intrusion. With the use of a electric field cable to minimize EM coupling, we obtained more accurate results by appling reference If technique measuring simultaneously wavelet of current as well as potential. With the aid of reference IP technique, it is possible that we can exactly evaluate seawater intrusion by discriminating seawater saturated area (no IP effect) from very highly conductive layer composed of clay mineral (high IP effect).

• Geophysics and Geophysical Exploration
• /
• 제5권1호
• /
• pp.23-32
• /
• 2002

Capacitively-coupled resistivity (CCR) system is known to be very useful where galvanic contact to earth is impossible, such as the area covered with thick ice, snow, concrete or asphalt. This system injects current non-galvanically, i.e., capacitively to earth through line antenna and measures potential difference in a same manner. We derived geometric factor for two types of antenna configuration and presented the method of processing and converting the data obtained with CCR system suitable to conventional resistivity inversion analysis. The CCR system, however, has limitations on use at conductive area or electrically noisy area since it is very difficult to inject sufficient current to earth with this system as with conventional resistivity system. This causes low SM ratio when acquiring data with CCR system and great care must be taken in acquiring data with this system. Additionally the uniform contact between line antennas and earth is also crucial factor to obtain good S/N ratio data. The CCR method, however, enables one to perform continuous profiling over a survey line by dragging entire system and thus will be useful in rapid investigation of conductivity distribution in shallow subsurface.

• Archives of Pharmacal Research
• /
• 제18권6호
• /
• pp.449-453
• /
• 1995

The search for patinum (II)-based compounds with improved therapeutic properties was prompted to design and synthesize a new family of water-soluble, third generation cis-diamminedichlorplatinum (II) complexes linked to uracil and uridine. Six heretofore undescribed uracil and uridine-platinum (II) complexes are ; [N-(2-aminoethyl)uracil-5-carboxamide]dichloroplatinum (II)(3a), [N-2(2-aminoethyl)uracil-6-carboxmide]dichloroplatinum (II) (3b),[5-(2-aminorthyl)carbamoyl-2',3',5',-tri-O-acetyluridine] dichloroplatinum (II) (6b), [5-(2-aminoethyl)-carbamoyl]-2',3',5',-tri-O-acetyluridine] dichloroplatinum (II) (6b), [5-(2-aminoethyl)carbamoylu-ridine]dihloroplatinum (II) (7a), [6-(2-aminoethyl)carbamoyluridine]dichloroplatinum (II) (7b). These analogues were prepared from the key starting materials, 5-carboxyuracil (1a) and 6-carboxyuracil (1b) which were reacted with ethylenediamine to afford the respective N-(2-aminoethyl)uracil-5-carboxmide (2a) land N-(2-aminoethyl)uracil-6-carboxamide (2b). The cisplatin complexes 3a and 3b were obtained through the reaction of the respective 2a and 2b ficiently introduced on the .betha.-D-ribose ring via a Vorbruggen-type nucleoside coupling procedure with hexamethyldisilazane, trimethylchlorosilane and stannicchloride under anhydrous acetonitfile to yield the sterospecific .betha.-anomeric 5-carboxy-2',3',5'-tri-O-acetyluridine (4a) and 6-carboxy-2',3',5'-tri-O-acetyluridine (4b), respective 5-(2-aminoethyl)carbamoyl-2',3',5'-tri-O-acetyluridine (5a) and 6-(2-aminoethyl)carbamoyl-2',3',5'-tri-O-acetyluridine (5b). The diamino-uridines 5a and 5b were reacted with potassium tetrachloroplatinate (II) to give the novel nucleoside complexes, 6a and 6b respectively which were deacetylated into the free nucleosides, 7a and 7b by the treatment with CH/sub 3/ONa. The antitumor activities were evaluated against three cell lines (K-562, FM-3A and P-388).

• Archives of Pharmacal Research
• /
• 제20권3호
• /
• pp.253-258
• /
• 1997

Ten, heretofore unreported, $ 5^I-methyl-5^I-[2-(5-substituted uracil-1-yl)ethyl)]-2^I-oxo-3^I$-methylenetetrahydrofurans (H, F, Cl, Br, I, $ CH_3$,$CF_3$,$CH_2CH_3$,$ CH=CH2$, SePh) (7a-j) were synthesized and evaluated against four cell lines (K-562, FM-3A, P-388 and U-937). For the preparation of ${\alpha}$-methylene-${\gamma}$-butyrolactone-linked to 5-substituted uracils (7a-j), the convenient Reformasky type reaction was employed which involves the treatment of ethyl ${\alpha}$-(bromomethyl)acrylate and zinc with the respective 1-(5-substituted uracil-1-yl)-3-butanone (6a-j). The 5-substituted uracil ketones (6a-j) were directly obtained by the respective Michael type reaction of vinyl methyl ketone with the $K_2CO_3$(or NaH)-treated 5-substituted uracils (5a-j) in the presence of acetic acid in the DMF solvent. The .alpha.-methylene-.gamma.-butyrolactone compounds showing the most significant antitumor activity are 7e, 7f, 7h and 7j (inhibitory concentration $(IC_50)$ ranging from 0.69 to $2.9 {\mu}g/ml$), while 7b, 7g and 7i have shown moderate to significant activity. The compounds 7a, 7c and 7d were found to be inactive. The synthetic intermediate compounds 6a-j were also screened and found marginal to moderate activity where compounds 6b and 6g showed significant activity $(IC_50:0.4~2.8 {\mu}g/ml)$.

• Archives of Pharmacal Research
• /
• 제21권4호
• /
• pp.465-469
• /
• 1998

The search for platinum (II)-based compounds with improved therapeutic properties was prompted to design and synthesize a new family of water-soluble, third generation cis-diaminedichloroplatinum (II) complexes linked to uracil and uridine. Six heretofore unreported uracil and uridine-platinum (II) complexes are; [N-(uracil-5-yl-methyl)ethane-1,2-di-amine]dichloroplatinum (II) (3a), [N-(uracil-6-yl-methyl)ethane-1,2-diaminel dichloroplatinum (II) (3b), t[N-($2^1$, $3^1$,$5^1$-tri-O-acetyl)uridine-5-yl-methyl] ethane-1,2-diamineldichloroplatinum (II) (6a), {[N-($2^1$,$3^1$, $5^1$-tri-O-acetyl) uridine-6-yl-methyl]ethane-1,2-diamine)dichloroplatinum (II) (6b),[N-(uridine- 5-yl-methyl)ethane-1,2-diamine]dichloroplatinum (II) (7a), [N-(uridine-6-yl- methyl)ethane-1,2-diamine]dichloroplatinum (II) (7b). These analogues were prepared from the key starting materials, 5-chloromethyluracil (1a) and 6-chloromethyluracil (1b) which were reacted with ethylenediamine to afford the respective 5-[(2-aminoethyl)aminol methyluracil (2a) and 6-[(2-aminoethyl)amino]methyluracil (2b). The cis-platin complexes 3a and 3b were obtained through the reaction of the respective 2a and 2b with potassium tetrachloroplatinate (II). The heterocyclic nucleic acid bases 1a and 1b were efficiently introduced on the .betha.-D-ribose ring via a Vorbruggen-type nucleoside coupling procedure with hexamethyldisilazane, trimethylchlorosilane and stannic chloride under anhydrous acetonitrile to yield the stereospecific .betha.-anomeric 5-chloromethyl- $2^1$,$3^1$,$5^1$-tri-O-acetyluridine (4a) and 6-chloromethyl-$2^1$,$3^1$,$5^1$-tri-O-acetyluridine (4b), respectively. The nucleosides 4a and 4b were coupled with ethylenediamine to provide the respective 5-[(amino-ethyl)aminolmethyl-$2^1$,$3^1$,$5^1$-tri-O-acetyluridine (5a) and 6-[(aminoethyl)amino] methyl-$2^1$,$3^1$,$5^1$-tri-O-acetyluridine (5b). The diamino-uridines 5a and 5b were reacted with potassium tetrachloroplatinate (II) to give the novel nucleoside complexes, 6a and 6b, respectively which were deacetylated into the free nucleosides, 7a and 7b by the treatment with CH$_{3}$ONa. The cytotoxic activities were evaluated against three cell lines (FM-3A, P-388 and J-82) and none of the synthesized compounds showed any significant activity.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제5C권3호
• /
• pp.102-110
• /
• 2005

Piezoelectric transformers(PT) are expected to be small, thin and highly efficient, and which are attractive as a transformer with high power density for step down voltage. For these reasons, we have attempted to develop a step-down PT for the miniaturized adaptor. We propose a PT, operating in thickness extensional vibration mode for step-down voltage. This PT consists of a multi-layered construction in the thickness direction. In order to develop the step-down PT of 10 W class and turn ratio of 0.1 with high efficiency and miniaturization, the piezoelectric ceramics and PT designs are estimated with a variety of characteristics. The basic composition of piezoelectric ceramics consists of ternary yPb(Zr$_{x}$Ti$_{1-x}$)O$_{3}$-(1-y)Pb(Mn$_{1/3}$Nb1$_{1/3}$Sb$_{1/3}$)O$_{3}$. In the piezoelectric characteristics evaluations, at y=0.95 and x=0.505, the electromechanical coupling factor(K$_{p}$) is 58$\%$, piezoelectric strain constant(d$_{33}$) is 270 pC/N, mechanical quality factor(Qr$_{m}$) is 1520, permittivity($\varepsilon$/ 0) is 1500, and Curie temperature is 350 $^{\circ}C$. At y = 0.90 and x = 0.500, kp is 56$\%$, d33 is 250 pC/N, Q$_{m}$ is 1820, $\varepsilon$$_{33}$$^{T}$/$\varepsilon$$_{0}$ is 1120, and Curie temperature is 290 $^{\circ}C$. It shows the excellent properties at morphotropic phase boundary regions. PZT-PMNS ceramic may be available for high power piezoelectric devices such as PTs. The design of step-down PTs for adaptor proposes a multi-layer structure to overcome some structural defects of conventional PTs. In order to design PTs and analyze their performances, the finite element analysis and equivalent circuit analysis method are applied. The maximum peak of gain G as a first mode for thickness extensional vibration occurs near 0.85 MHz at load resistance of 10 .The peak of second mode at 1.7 MHz is 0.12 and the efficiency is 92$\%$.

• Polymer(Korea)
• /
• 제24권3호
• /
• pp.389-398
• /
• 2000

Transparent, abrasion resistant coatings with 4~13 ${\mu}{\textrm}{m}$ thickness were prepared by spin-coating on polycarbonates with organic/inorganic hybrid solutions, followed by UV curing and heat treatment at 12$0^{\circ}C$ for 12 hours. The coating solutions were composed of inorganic phase and organic phase in 0:100, 20:80, 30:70, 50:50, 80:20 wt% ratios, respectively, mixed with photoinitiator, senaitizer and surfactant. The inorganic phase was formed by sol-gel reaction of TEOS and silane coupling agent MPTMS in 1 : 2 or 2 : 1 molar ratios, the organic phase consisted of difunctional urethane acrylate oligomeric resin, multifunctional acrylate TMPTA and HDDA in 4 : 3 : 3 wt% ratio. The coating systems were investigated by FT-IR, $^{29}$ Si-NMR spectra. In addition, TGA/DSC for thermal analysis and SEM, AFM observation for coated surface were examined. Gererally, the homogeneity of phases, the surface smoothness of coating and abrasion resistance were improved with the higher content of inorganic component. Namely, coating system with below 10 $\AA$ surface roughness and T$_{g}$ of 15$0^{\circ}C$ showed only 10% decrease in light transmittance after abrasion test, whereas uncoated polycarbonate substrate exhibited 46% decrease..