• 척추신경추나의학회지
• /
• 제5권2호
• /
• pp.43-48
• /
• 2010

단순 방사선검사와 이학적 검사에서 특이 소견을 발견할 수 없는 발음성 고관절 환자에서 대전자의 움직임을 통해 고관절의 움직임 이상을 발견하고 경근추나를 시행하였다. 1. 환자분이 복와위에서 능동적 신전운동, 앙와위에서 능동적 굴곡운동을 하는 동안 환자의 대전자를 통해 고관절이 전내측 방향으로 움직임을 관찰하였다. 2. 고관절의 전내측 방향으로 움직임의 과도를 유발할 수 있는 대퇴근막장근과 슬괵근의 단축을 평가하고 경근이완기법을 적용하였다. 3. 슬곽근에 대항작용을 하고 고관절이 관골구내에서 안정성을 유지하기 위해 필요한 대둔근, 대퇴근막장근에 대항작용을 할 수 있는 후중둔근과 장요근의 약화를 관찰하고 경근강화기법을 시행하였다. 4. 13회의 치료 후 발음성고관절의 주증상인 통증과 탄발음이 거의 소실되는 양호한 결과를 얻었다. 5. 고관절의 움직임 이상이 발견된 발음성 고관절 환자에서 해당 경근의 단축과 약화가 발견될 경우 경근추나수기법을 이용해 볼 수 있을 것으로 판단된다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권2호
• /
• pp.459-470
• /
• 2014

During ship design, welding-induced distortions are roughly estimated as a function of the size of the component as well as the welding process and residual stresses are assumed to be locally in the range of the yield stress. Existing welding simulation methods are very complex and time-consuming and therefore not applicable to large structures like ships. Simplified methods for the estimation of welding effects were and still are subject of several research projects, but mostly concerning smaller structures. The main goal of this paper is the application of a multi-layer welding simulation to the block joint of a ship structure. When welding block joints, high constraints occur due to the ship structure which are assumed to result in accordingly high residual stresses. Constraints measured during construction were realized in a test plant for small-scale welding specimens in order to investigate their and other effects on the residual stresses. Associated welding simulations were successfully performed with fine-mesh finite element models. Further analyses showed that a courser mesh was also able to reproduce the welding-induced reaction forces and hence the residual stresses after some calibration. Based on the coarse modeling it was possible to perform the welding simulation at a block joint in order to investigate the influence of the resulting residual stresses on the behavior of the real structure, showing quite interesting stress distributions. Finally it is discussed whether smaller and idealized models of definite areas of the block joint can be used to achieve the same results offering possibilities to consider residual stresses in the design process.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.990-995
• /
• 1990

A minimum-time trajectory planning for two robot arms with designated paths and coordination is proposed. The problem considered in this paper is a subproblem of hierarchically decomposed trajectory planning approach for multiple robots : i) path planning, ii) coordination planning, iii) velocity planning. In coordination planning stage, coordination space, a specific form of configuration space, is constructed to determine collision region and collision-free region, and a collision-free coordination curve (CFCC) passing collision-free region is selected. In velocity planning stage, normal dynamic equations of the robots, described by joint angles, velocities and accelerations, are converted into simpler forms which are described by traveling distance along collision-free coordination curve. By utilizing maximum allowable torques and joint velocity limits, admissible range of velocity and acceleration along CFCC is derived, and a minimum-time velocity planning is calculated in phase plane. Also the planning algorithm itself is converted to simple numerical iterative calculation form based on the concept of neural optimization network, which gives a feasible approximate solution to this planning problem. To show the usefulness of proposed method, an example of trajectory planning for 2 SCARA type robots in common workspace is illustrated.

• 동의신경정신과학회지
• /
• 제32권3호
• /
• pp.261-273
• /
• 2021

The purpose of this study was to introduce effects of Chukyu pharmacopuncture and Brainspotting on knee pain, headaches, and acute stress disorder of a patient with a traffic accident. We treated a patient with Chukyu pharmacopuncture and Brainspotting. Numerical rating scale (NRS), Range of Motion (ROM), Hyperextension Position (HEP), Effusion (Eff), Patella Compression Test (PCT), Frontal Flexion Position (FFP), McMurray (MCM), Lateral Joint Line Tenderness (LJLT), Medial Joint Line Tenderness (MJLT), Anterior Drawer Test (ADT), Lachman Test, Varus/Valgus stress, Beck Anxiety Inventory (BAI), Patient Health Questionnaire-9 (PHQ-9), Pittsburgh Sleep Quality Index (PSQI), Core Seven Emotions Inventory Short Form (CSEI-S), Subjective units of disturbance scale (SUDs), and Heart rate variability (HRV) were used to evaluate the patient. After the patient was treated by Chukyu pharmacopuncture and Brainspotting, the patient showed improvement in NRS, physical examination, and psychological symptom assessment. These results indicate that Chukyu pharmacopuncture and Brainspotting are effective on knee pain, headache, and acute stress disorder after a traffic accident.

• Nuclear Engineering and Technology
• /
• 제55권4호
• /
• pp.1571-1584
• /
• 2023

In this study, a numerical analysis was performed as part of an international joint research project to reproduce a real cable tray fire that occurred in the heater bay area of the turbine building of a nuclear power plant. A sensitivity analysis was performed on various input parameters to derive results consistent with the sprinkler activation time obtained from the fire event analysis. For all sensitive parameters, the normalized sprinkler activation time correlated well with the power function of the normalized sprinkler height. A correlation equation was developed to identify the sprinkler activation time at any location when determining the slope or fire growth rate under the conditions assuming a linear or t-squared heat release rate (HRR) time curve. Various cable fire growth assumptions were used to determine which assumption was better to provide the prediction coincident with the information given from the fire event analysis in terms of the sprinkler activation time and total energy generated from cables damaged by fire. In the comprehensive analysis of all the sensitive parameters, the standard deviation of the input parameters increased as the sprinkler height decreased. Within the range of the sensitivity parameter values given in this study, when considering all sprinkler heights, the standard deviation of the cable model change was the largest and that of the overhang position change was the smallest.

• 한국경영과학회지
• /
• 제33권4호
• /
• pp.53-61
• /
• 2008

Recently, Ertogral et al.[2] suggested two models considering the transportation cost based on single-vendor single-buyer integrated production-inventory problem. Although their problem-solving algorithm guarantees solutions obtained are optimal, a limitation is revealed that its performance can be inefficient due to complete enumeration search in a certain range. In this paper, a more efficient algorithm in finding optimal solutions is suggested for the same problem suggested by Ertogral et at.[2]. Numerical examples are presented for illustrative purpose.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 봄 학술발표회 논문집
• /
• pp.61-68
• /
• 2002

Tubular members have been applied in a wide range of frame structures including offshore structures. For the efficient load flow in tubular-member structures, the joints of tubular members are usually reinforced using internal ring stiffener for the steel tubular joint having a large diameter. The objective of this paper is to numerically assess the behavior of X-joints with an internal ring stiffener, and to evaluate the reinforcement effect of a ring stiffener, and to establish the strength formulae. Nonlinear finite element analysis is used to compute the static strength of axially loaded tubular joints. From the numerical results, internal ring stiffener is found to be efficient in improving static strength of tubular X-joints. Maximum strength ratios are calculated as 1.5~3.5, and the effective dimensions of ring stiffener are found. Regression analyses are performed considering practical size of ring stiffener and strength estimation formulae are proposed.

• 한방재활의학과학회지
• /
• 제32권2호
• /
• pp.155-162
• /
• 2022

The purpose of this clinical case is to evaluate the efficacy of the Korean medical treatment on a ligamentum teres tear of the hip. One patient, admitted to Daejeon Jaseng Hospital of Korean Medicine was diagnosed with a ligamentum teres tear of the hip by hip magnetic resonance imaging. We treated the patient using the Korean medical treatments, including acupunture, pharmacopuncture, herbal medication, and cupping. We measured the numerical rating scale (NRS), passive range of motion (PROM) and the changes of symptoms. After 13 days, NRS decreased from 8 to 1 respectively, PROM of hip joint has recovered, and the symptoms of the patient improved. In conclusion, this study shows that Korean medical treatment might be effective in treating the patient with a ligamentum teres tear of the hip.

• Smart Structures and Systems
• /
• 제31권3호
• /
• pp.301-309
• /
• 2023

Tilt is a key indicator of structural safety. Real-time monitoring of tilt responses helps to evaluate structural condition, enable cost-effective maintenance, and enhance lifetime resilience. This paper presents a prototype wireless sensing system for structural tilt measurement. Long range (LoRa) technology is adopted by the sensing system to offer long-range wireless communication with low power consumption. The sensor integrates a gyroscope and an accelerometer as the sensing module. Although tilt can be estimated from the gyroscope or the accelerometer measurements, these estimates suffer from either drift issue or high noise. To address this challenging issue and obtain more reliable tilt results, two sensor fusion algorithms, the complementary filter and the Kalman filter, are investigated to fully exploit the advantages of both gyroscope and accelerometer measurements. Numerical simulation is carried out to validate and compare the sensor fusion algorithms. Laboratory experiment is conducted on a simply supported beam under moving vehicle load to further investigate the performance of the proposed wireless tilt sensing system.

• Clinics in Shoulder and Elbow
• /
• 제27권1호
• /
• pp.45-51
• /
• 2024

Background: It is essential to distinguish between symptomatic- and asymptomatic radiographic acromioclavicular (AC) osteoarthritis (OA) because AC-targeted physical examinations are dubious. This study aimed to determine the diagnostic value of a preoperative AC injection in discriminating between symptomatic- and asymptomatic radiographic AC OA based on patient arthroscopic distal clavicle resection (aDCR) outcomes. Methods: Forty-eight patients who underwent aDCR for AC OA were included. Their satisfaction was objectified using a 5-point Likert scale and patient willingness to repeat the surgery. The Oxford Shoulder Score (OSS), the Subjective Shoulder Value (SSV), and the Numerical Rating Scale (NRS) were used to assess postoperative shoulder function and pain. Patients were subdivided into groups based on their good or minimal reaction to an AC injection (good reaction: ≥7 consecutive days of pain reduction, Minimal reaction: <7 consecutive days of pain reduction). Results: Twenty-seven patients had a good reaction and 21 patients had a minimal reaction to the AC injection (median follow-up, 45.0 months; range, 31.0-52.8 months). No significant differences were found in level of satisfaction (P=0.234) or willingness to repeat the surgery (P=0.861). No significant differences were found in OSS (P=0.612), SSV (P=0.641), NRS at rest (P=0.684) or during activity (P=0.422). Conclusions: This study found no significant differences between patients with a good reaction or a minimal reaction to an AC injection after aDCR surgery. The outcomes of this study seem to suggest that a distinction between symptomatic and asymptomatic radiographic AC OA is unnecessary, as all patients were equally satisfied with the outcome.