• 한국도로학회논문집
• /
• 제13권4호
• /
• pp.81-91
• /
• 2011

본 연구는 연속철근 콘크리트 포장(CRCP: Continuously reinforced concrete pavement)에서 단부 앵커러그 유무에 따른 종방향 변위 비교를 통해 앵커러그의 필요성을 분석하고 내부 수평균열의 수직방향 변위 측정을 통해 이러한 균열이 CRCP의 공용성에 미치는 영향을 분석하기 위하여 수행되었다. 앵커러그 구간 절단 전 거동 측정은 6월 중에 12일간 계측하였으며, 앵커 러그 구간 절단 후의 측정은 절단 시 슬래브에 급격히 발생하는 변위가 사라진 이후 8월 중에 14일 동안 계측하였다. 이와 같은 단기간의 계측 결과 CRCP 단부의 종방향 변위는 앵커러그가 설치되어 있는 경우에는 모든 위치에서 일일 변위 변화가 0.1mm 이내로 종방향 거동이 거의 발생하지 않았다. 단부에 앵커러그가 설치되지 않은 경우에는 변위가 자유 단부 부근에서만 주로 발생하며 종방향 변위 변화가 작아서 팽창줄눈으로 처리하여도 적절할 것으로 예측되었으나, 향후 추가연구에 의해 사계절 온도변화에 따른 단부의 거동을 확인할 필요가 있을 것으로 판단된다. 내부 수평균열은 거동 측정 결과 거의 비활성균열이며 전체적인 슬래브의 수직변위에 영향을 미치지 않았다. 따라서 수평균열이 슬래브를 상하로 분리시켜 CRCP의 구조적인 성능 및 공용성의 저하를 유발하지는 않을 것으로 분석되었다.

• 시큐리티연구
• /
• 제62호
• /
• pp.113-134
• /
• 2020

이 연구는 출소자의 심리건강이 지역사회적응에 미치는 영향을 위험요인과 보호요인으로 구분하여 관계를 검증하고자 수행되었다. 이를 위해 한국법무보호복지공단에서 합동결혼지원을 받은 출소자 216명을 대상으로 수행한 설문자료를 분석하였고, 분석의 결과, 인구사회학적 특성 중 최종학력, 배우자 유무, 월수입 등이 출소자의 지역사회 적응에 긍정적 영향을 미치고 있었으며, 심리건강의 위험요인 중 우울과 대인예민성이 높을수록 지역사회 적응에 부정적인 영향을 미치는 것으로 나타났다. 심리건강 보호요인인 자존감이 높을수록 위험요인인 우울과 대인예민성의 영향력을 감소시켜 지역사회 적응에 긍정적인 영향을 미치는 것으로 나타났다. 종합해보면, 높은 자존감은 출소자들이 출소 후 사회생활 만족도를 높이는 데 기여하고, 위험요인을 긍정적 삶의 변화로 촉진시켜 부정적 상황을 억제하며 성공적인 지역사회 적응의 가능성을 증가시킬 수 있다. 이 연구는 출소자의 성공적인 지역사회 적응을 위해 심리적 요인 중에서 자존감이 가장 중요한 요인이라는 것을 확인하였지만, 출소자의 지역사회 적응과 재범예방을 위해서는 심리적 요인만으로는 해결될 수 없기에 관련된 후속연구 및 다각적 지원이 필요할 것이다.

• Journal of Ginseng Research
• /
• 제44권6호
• /
• pp.790-798
• /
• 2020

Background: Beneficial effects of Korean Red Ginseng (KRG) on polycystic ovarian syndrome (PCOS) remains unclear. Methods: We examined whether pretreatment (daily from 2 hours before PCOS induction) with KRG extract in water (KRGE; 75 and 150 mg/kg/day, p.o.) could exert a favorable effect in a dehydroepian-drosterone (DHEA)-induced PCOS rat model. Results: Pretreatment with KRGE significantly inhibited the elevation of body and ovary weights, the increase in number and size of ovarian cysts, and the elevation of serum testosterone and estradiol levels induced by DHEA. Pretreatment with KRGE also inhibited macrophage infiltration and enhanced mRNA expression levels of chemokines [interleukin (IL)-8, monocyte chemoattractant protein-1), proinflammatory cytokines (IL-1β, IL-6), and inducible nitric oxide synthase in ovaries induced by DHEA. It also prevented the reduction in mRNA expression of growth factors (epidermal growth factor, transforming growth factor-beta (EGF, TGF-β)) related to inhibition of the nuclear factor kappa-light-chain-enhancer of activated B cell pathway and stimulation of the nuclear factor erythroid-derived 2-related factor 2 pathway. Interestingly, KRGE or representative ginsenosides (Rb1, Rg1, and Rg3(s)) inhibited the activity of inflammatory enzymes cyclooxygenase-2 and iNOS, cytosolic p-IκB, and nuclear p-nuclear factor kappa-light-chain-enhancer of activated B in lipopolysaccharide-induced RAW264.7 cells, whereas they increased nuclear factor erythroid-derived 2-related factor 2 nuclear translocation. Conclusion: These results provide that KRGE could prevent DHEA-induced PCOS via antiinflammatory and antioxidant activities. Thus, KRGE may be used in preventive and therapeutic strategies for PCOS-like symptoms.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.193-198
• /
• 2002

In 1his paper, applicability of laser welding to joining process of single crystal nickel base superalloy turbine blades was investigated. Because heat input of laser welding is more precisely controlled 1han TIG welding, it is possible to optimize solidification microstructure of the welds. Since in single crystal nickel base superalloy the crystal orientation have a significant effect on the strength, it is important to control the solidification microstructure in the fusion zone. A single crystal nickel base supera1loy, CMSX-4, plates were bead-on welded and butt welded using a $CO_2$ laser. The effects of microstructure and crystal orientation on properties of the weld joints were investigated. In bead-on weldling, welding directions were deviated from the base metal [100] direction by 0, 5, 15 and 30 degrees. The welds with deviation angles of 15 and 30 degrees showed fusion zone transverse cracks. As the deviation angles became larger, the fusion zone had more cracking. In the cross section microstructure, the fusion zone grains in 0 and 5 degrees welds grew epitaxially from the base metal spins except for the bead neck regions. The grains in the bead neck regions contained stray crystals. As deviation angles increased, number of the stray crystals increased. In butt welding, the declinations of the crystal orientation of the two base metals varied 0, 5 and 10 degrees. All beads had no cracks. In the 5 degrees bead, the cross section and surface microstructures showed that the fusion zone grains grew epitaxially from the base metal grains. However, the 10 degrees bead, the bead cross section and surface contained the stray crystals in the center of the welds. Orientations of the stray crystals accorded with the heat flow directions in the weld pool. When the welding direction was deviated from the base metal [100] direction, cracks appeared in the area including the stray crystals. The cracks developed along the grain boundaries of the stray crystals with high angles in the final solidification regions at the center of the welds. The fracture surfaces were covered with liquid film. The cracks, therefore, found to be solidification cracks due to the presence of low melting eutectic. As the results, in both bead-on welding and butt welding the deviation angles should be control within 5 degrees for preventing the fusion zone cracks. To investigate the mechanical properties of the weld joints, high temperature tensile tests for bead-on welds with deviation angles of 0 and 5 degrees and the butt welds with dec1ination angles of 0, 5 and 10 degrees were conducted at 1123K. The the tensile strength of all weld joints were more 1han 800MPa that is almost 80% of the tensile strength of the base metal. The strength of the laser weld joints were more than twice that of tue TIG weld joints with a filler metal of Inconel 625. The results reveals 1hat laser welding is more effective joining process for single crystal nickelbase superalloy turbine blades 1han TIG welding.

• 한국강구조학회 논문집
• /
• 제29권1호
• /
• pp.81-88
• /
• 2017

확장단부판 접합부는 강구조물의 보-기둥 접합부 혹은 변단면 부재로 구성된 PEB 구조시스템에 적용되는 접합부의 한 형태이다. 확장단부판 접합부는 접합부를 구성하는 단부판의 두께, 고장력볼트의 게이지 거리, 고장력볼트 축부의 직경, 고장력볼트의 개수 등의 영향으로 상이한 거동특성을 나타낸다. 확장단부판 접합부는 미국 및 유럽 등지에서는 다양한 형태로 강구조물의 기둥-보 접합부에 적용되고 있으나 우리나라에서는 널리 적용되고 있지 않다. 이러한 이유로는 확장단부판 접합부에 대한 설계강도식 제안, 접합부상세 제안, 내진성능 평가, 제작 및 시공지침서 개발 등이 적절히 이루어지지 못하고 있기 때문이다. 따라서 이 연구는 비보강 확장단부판 접합부의 국내 적용을 위한 기초자료를 제공하기 위하여 진행하였다. 이를 위하여 두께 12mm의 비보강 확장단부판에 대한 비선형 유한요소해석 및 실험을 수행하였다.

• Journal of Acupuncture Research
• /
• 제21권1호
• /
• pp.136-148
• /
• 2004

Objective: Recently scolopendrid aquacupuncture has been a good effect on pain control but it has not been known about clinical safety. So, In order to prove the clinical safety of scolopendrid aquacupuncture, We have observed the physical reac-tion and clinical pathology test after scolopendrid aquacupuncture treatment. Methods: We analyzed physical reaction and clinical pathology test before and after Scolopendrid aquacupuncture treatment of 30 patients suffering from pain, who admitted department of Acupunture and Moxibustion, College of Oriental Medicine, Won-Kwang University Kwangju hospital. Results & Conclusions: The results were summarized as follows. 1) The distribution of sex was 14 males and 16 females, and the average of patients age was 46.2 years. 2) The distribution of symptom was lumbago, lumbago with radiating pain, nuchal pain and knee joint pain. 3) In the 30 patients treated with Scolopendrid aquacupuncture, hematologic test did not show remarkable change. 4) In the 30 patients treated with Scolopendrid aquacupuncture, Liver function test(AST, ALT, ALP) showed a slight decrease on the contrary, and abnormal rate showed a decrease of 1.0%(from 3.3% to 2.3%) compared with previous study. 5) In the 30 patients treated with Scolopendrid aquacupuncture, Renal function test(BUN, Cr) and abnormal rate(from 2.5% to 2.0%) showed a slight decrease on the contrary. 6) In the 30 patients treated with Scolopendrid aquacupuncture. Electrolyte were normal range before & after treatment. 7) In the results of the Urine analysis of 30 patients, Leukocyte, Protein. Glucose, Keton, Bilirubin, U-bilinogen were not detected before and after Scolopendrid aquacupuncture treatment, and the rest almost made no difference. 8) In the Physical reactions, all of the patients complained of pain of body partially, only one patient showed reddish and itch, but symptoms like those were entirely disappeared within 24 hours and whole body pain, swelling, headache, dizziness, fatigue and nausea was not observed.

• 마이크로전자및패키징학회지
• /
• 제19권4호
• /
• pp.57-64
• /
• 2012

표면처리에 따른 Sn-1.2Ag-0.7Cu-0.4In 솔더범프의 접합 강도 평가를 위하여 전단 속도 및 열처리 시간에 따른 볼 전단강도 시험을 실시하였다. 전반적으로, 전단속도가 증가함에 따라 전단강도는 증가하였지만 인성은 감소하는 경향을 나타내었다. 파괴모드 관찰 결과, 전단 속도가 증가함에 따라 파괴모드의 경우, ENIG(electroless nickel immersion gold) 처리는 취성파괴가 대부분 지배적으로 존재하였고, OSP(organic solderability preservative) 처리는 pad open이 주로 발생하였다. 또한, 500 mm/s의 고속전단시험에서는 열처리 시간이 증가함에 따라 표면처리별 전단강도와 인성 값 모두 감소하는 경향을 보였다. ENIG 표면처리가 OSP 표면처리 보다 좋은 접합강도 특성을 보이는 것은 솔더범프 계면의 금속간화합물의 물성 및 두께와 밀접한 연관이 있는 것으로 판단된다.

• Journal of Acupuncture Research
• /
• 제24권4호
• /
• pp.167-181
• /
• 2007

Objectives: To evaluate expression of MIF mRNA, MIF, $TNF-{\alpha}$, $IL-6R-{\alpha}$, STAT-3, $NF-{\kappa}B$ p65, COX-2 and iNOS, MMP-9mRNA after injecting deer antler herbal acupuncture solution in a LPS rat model. Methods: The experiment was divided in category of the control group, RA group, and NA group. RA was induced in the mice via injecting 300ug/kg LPS. The deer antler herbal acupuncture solution 50ug/kg was applied on $ST_{35}$(犢鼻) and EX-LE201(內膝眼) for 19days from $3^{rd}$ day of RA inducement. Results: 1. In the deer antler herbal acupuncture solution treated RAW 264.7cell, the mRNA expression of cytokines, RA related inflammation factors, such as the MIF, COX- 2, iNOS, and MMP-g reduced concentration dependently. 2. In the deer antler herbal acupuncture treated mice's synovial membrane, decrease in the cell replication of synovial joint cells, regeneration of blood vessel, fibrosis and fibroblastic cells expansion were observed. 3. Positive reaction of RA-related cytokines MIF, $TNF-{\alpha}$, $IL-6R-{\alpha}$, STAT3, COX-2, iNOS, $NF-\;{\kappa}B$ p65, MMP-9 was reduced. Conclusion : On the basis of the results, it was concluded that deer antler herbal acupuncture extract has significant protecting ability against acute progressive RA by inhibiting the production of MIF, as a top in cytokines related to inflammation.

• 대한인간공학회지
• /
• 제34권4호
• /
• pp.313-326
• /
• 2015

Objective: The objective of this research is to quantitatively analyze muscle activities of arm and shoulder, according to direction in various types of one-handed manual material handling, based on surface electromyography. Background: Workers in industrial sites frequently carry out one-handed manual material handling using arm and shoulder muscles. Therefore, chronic load and accumulated fatigue occur to arm and shoulder muscles, which becomes a main cause of upper arm and shoulder musculoskeletal disorders. The shoulder muscles have widely range of motion, and complex interactions take place among various muscles including rotator cuff muscles. In this regard, research on interactions among should muscles, according to such various dynamic motions, is required. Method: Ten male subjects in their 20s participated in this research. This research considered upward, downward, leftward, rightward, forward and backward directions and fourteen muscles around arm and shoulder (biceps brachii and trapezius, etc.) as independent variables. The mean muscle activity was set as the dependent variable. This research extracted $4^{th}{\sim}7^{th}$ repetition signals according to ten times of repetitive muscle contraction, and analyzed the muscle activity concerned using the envelope detection technique. Results: The mean muscle activity of upward direction was analyzed highly statistically significant. The reason is that the effect of gravity works to arm and shoulder muscles. Also, it is conjectured that deformation of coracoacromial ligament was caused, and its contact pressure increased, due mainly to the shoulder flexion, and therefore load was analyzed high. Muscle activity was analyzed significantly low, according to concentric ballistic motion used in the concentric contraction phase by storing elastic energy in the eccentric contraction phase with a motion to bring the weight to the front of subject's body as to downward, leftward and backward directions. Because, elbow joint's flexion-extension motions mainly occurred, biceps brachii was analyzed high muscle activity as the prime mover. Conclusion: The information on the quantitative load of muscles can be applied to ergonomic work design for one-handed manual material handling to minimize muscle load. Application: This research has effectively identified muscle activity according to dynamic contraction by applying an envelope detection technique. The results can be used for ergonomic work design to minimize muscle load during the one-handed manual material handling, according to each direction. The research results are expected to be used for musculoskeletal disorder prevention and physiotherapy in the rehabilitation medical field, based on the muscle load of arm and shoulder in various directions.

• 대한치과보철학회지
• /
• 제44권5호
• /
• pp.642-653
• /
• 2006

Purpose : The purpose of this study was to investigate the effect of the output energy(voltage) of laser welding on the strength and properties of joint of cast titanium(CP Gr II) and titanium alloy(Ti-6Al-4V). Material and method : Cast titanium and its alloy rods(ISO6871) were prepared and perpendicularly cut at the center of the rod. After the cut halves were fixed in a jig, and the joints welded with a laser-welding machine at several levels of output voltage of $200V{\sim}280V$. Uncut specimens served as the non-welded control specimens The pulse duration and pulse spot size employed in this study were 10ms and 1.0mm respectively. Tensile testing was conducted at a crosshead speed of 0.5mm/min. The ultimate tensile strength(MPa) was recorded, and the data (n=6) were statistically analyzed by one-way analysis of variance(ANOVA) and Scheffe's test at ${\alpha}$=0.05. The fracture surface of specimens investigated by scanning electron microscope (SEM). Vickers microhardness was measured under 500g load of 15seconds with the optimal condition of output voltage 280V. Results : The results of this study were obtained as follows, 1. When the pulse duration and spot size were fixed at 10ms and 1.0mm respectively, increasing the output energy(voltage) increased UTS values and penetration depth of laser welded to titanium and titanium alloy. 2. For the commercial titanium grade II, ultimate tensile strength(665.3MPa) of the specimens laser-welded at voltage of 280V were not statistically(p>0.05) different from the non-welded control specimens (680.2MPa). 3. For the titanium alloy(Ti-6Al-4V), ultimate tensile strength(988.3MPa) of the specimens laser-welded at voltage of 280V were statistically(p<0.05) different from the non-welded control specimens (665.0MPa). 4. The commercial titanium grade II and titanium alloy(Ti-6Al-4V) were Vickers microhardness values were increased in the fusion zone and there were no significant differences in base metal, heat-affected zone.