• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.2
• /
• pp.295-301
• /
• 2018

In various disciplines, researchers, not single researchers, tend to cooperate to study the same topic. There are many studies to analyze the collaborative form of various researchers through the social network analysis method, but there are few such studies in the computer field. In this paper, we analyze the characteristics of network and various groups of researchers through the social network analysis technique of the co-authors of the Journal of Korea Institute of Information and Communication Engineering, and analyze the degree centrality, the between centrality and edge weight. As a result of the analysis, many groups were extracted from the co-author's network, but the top 20 groups accounted for more than 50% of the total, also, we could find a pair of researchers who do joint research with a very high frequency. These Co-author networks are expected to be the basis for in-depth research on the subject and direction of research through future researches.

• Journal of Korean Physical Therapy Science
• /
• v.24 no.3
• /
• pp.18-29
• /
• 2017

Purpose: The purpose of this study was to identify the effect of hallux valgus (HV) correction taping on the foot arch and balance of young adults with HV of the big toe. Methods: Forty-eight adults volunteered to participate in this study; of them, the 37 feet (11 men, 26 women) with ${\geq}15^{\circ}$ lateral bending of the metatarsophalangeal joint of the big toe, on a goniometer, were selected as the target foot. Non-elastic correction tape was applied to the foot with HV, while the target foot was used to evaluate the changes, before versus after taping, in the lateral bending angle of the big toe, navicular drop level, Clarke angle, and static balance using a Gaitview system. Each measurement was performed three times, and the average of each set was used in the analysis. The patients'general characteristics were compared by using an independent t-test, and the measurement values were analyzed by using a paired t-test. Results: After taping, the lateral bending angle of the toe significantly decreased (p<.05), difference in navicular drop level significantly decreased (p<.05), the Clarke angle significantly increased (p<.05), and static balance significantly improved (p<.05). Conclusion: We showed that HV taping resulted in an immediately improved HV angle, arch, and single-leg standing balance on the foot with HV. However, further studies should investigate the correlation between HV and foot arch.

• Journal of Korean Neurosurgical Society
• /
• v.61 no.2
• /
• pp.277-281
• /
• 2018

Objective : Craniovertebral junctional anomalies constitute a technical challenge. Surgical opening of atlantoaxial joint region is a complex procedure especially in patients with nuchal deformity like basilar invagination. This region has actually very complicated anatomical and functional characteristics, including multiple joints providing extension, flexion, and wide rotation. In fact, it is also a bottleneck region where bones, neural structures, and blood vessels are located. Stabilization surgery regarding this region should consider the fact that the area exposes excessive and life-long stress due to complex movements and human posture. Therefore, all options should be considered for surgical stabilization, and they could be interchanged during the surgery, if required. Methods : A 53-year-old male patient applied to outpatients' clinic with complaints of head and neck pain persisting for a long time. Physical examination was normal except increased deep tendon reflexes. The patient was on long-term corticosteroid due to an allergic disease. Magnetic resonance imaging and computed tomography findings indicated basilar invagination and atlantoaxial dislocation.The patient underwent C0-C3-C4 (lateral mass) and additional C0-C2 (translaminar) stabilization surgery. Results : In routine practice, the sites where rods are bound to occipital plates were placed as paramedian. Instead, we inserted lateral mass screw to the sites where occipital screws were inserted on the occipital plate, thereby creating a site where extra rod could be bound.When C2 translaminar screw is inserted, screw caps remain on the median plane, which makes them difficult to bind to contralateral system. These bind directly to occipital plate without any connection from this region to the contralateral system.Advantages of this technique include easy insertion of C2 translaminar screws, presence of increased screw sizes, and exclusion of pullout forces onto the screw from neck movements. Another advantage of the technique is the median placement of the rod; i.e., thick part of the occipital bone is in alignment with axial loading. Conclusion : We believe that this technique, which could be easily performed as adjuvant to classical stabilization surgery with no need for special screw and rod, may improve distraction force in patients with low bone density.

• Journal of Korean Neurosurgical Society
• /
• v.61 no.2
• /
• pp.243-250
• /
• 2018

Objective : To compare the morphometry of subaxial cervical spine between cerebral palsy (CP) and normal control. Methods : We retrospectively analyzed 72 patients with CP, as well as 72 patients from normal population. The two groups were matched for age, sex, and body mass index. Pedicle, lateral mass (LM), and vertebral foramen were evaluated using computed tomography (CT) imaging. Pedicle diameter, LM height, thickness, width and vertebral foramen asymmetry (VFA) were measured and compared between the two groups. Cervical dynamic motion, disc and facet joint degeneration were investigated. Additionally, we compared the morphology of LM between convex side and concave side with cervical scoliotic CP patients. Results : LM height was smaller in CP group. LM thickness and width were larger in CP group at mid-cervical level. In 40 CP patients with cervical scoliosis, there were no height and width differences between convex and concave side. Pedicle outer diameter was not statistically different between two groups. Pedicle inner diameter was significantly smaller in CP group. Pedicle sclerosis was more frequent in CP patients. VFA was larger in CP group at C3, C4, and C5. Disc/facet degeneration grade was higher in the CP group. Cervical motion of CP group was smaller than those of the control group. Conclusion : LM morphology of CP patients was different from normal population. Sclerotic pedicles and vertebral foramen asymmetry were more commonly identified in CP patients. CP patients were more likely to demonstrate progressive disc/facet degeneration. This data may provide useful information on cervical posterior instrumentation in CP patients.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.6
• /
• pp.703-711
• /
• 2016

The purposes of this study is to identify the problems arising from current Test & Evaluation process of the naval ship acquisition program and to suggest methods to increase the acquisition efficiency. Considering that the present rule of developmental test &evaluation(DT&E) and operational test & evaluation(OT&E) has caused an inefficiency effect on the acquisition procedures due to the limited practices on it, the DT&E and OT&E procedures through test & evaluation master plan(TEMP) is proposed based on the selective practices of the defense instruction articles. Also, considering characteristics of naval ship acquisitions, efficient procedure systems are derived through case analysis results by comparing each performances of the system. The suggested methods are able to meet the requirements of the changed acquisition environments and also increase efficiency of acquisition systems by adoption of DT&E and OT&E combined test scheme.

• Smart Media Journal
• /
• v.6 no.4
• /
• pp.101-109
• /
• 2017

Traditional cultural resources in the region have unique cultural characteristics and are highly likely to be differentiated content resources. Therefore, when local cultural resources are developed as content, they can be given a role as a brand symbolizing the region together with economic value creation. In this paper, we propose a method to utilize traditional cultural resources in Jeonnam region as content material and to strengthen the connection with 'Namdo Renaissance' project contents in Jeonnam province. We propose seven regions as a region with content relevance for inter-regional collaboration through resource elements and analysis of Jeonnam cities and counties. We suggest "Story SarangBang" so that we can uncover and systematize stories with symbolic character by region. The developed story resources are developed as experiential contents through realistic media production technology and virtual reality platform and expanded to tourism contents and expanded to the window effect of contents. Also, by expanding cooperation governance between regions, it is possible to enhance opportunities for development of joint contents and enhance utilization as tourist contents, thereby contributing to regional economic development and related industries development.

• Journal of Astronomy and Space Sciences
• /
• v.32 no.4
• /
• pp.411-417
• /
• 2015

Several optical monitoring strategies by a ground-based telescope to protect a Geostationary Earth Orbit (GEO) satellite from collisions with close approaching objects were investigated. Geostationary Transfer Orbit (GTO) objects, Inclined GeoSynchronous Orbit (IGSO) objects, and drifted GEO objects forced by natural perturbations are hazardous to operational GEO satellites regarding issues related to close approaches. The status of these objects was analyzed on the basis of their orbital characteristics in Two-Line Element (TLE) data from the Joint Space Operation Center (JSpOC). We confirmed the conjunction probability with all catalogued objects for the domestic operational GEO satellite, Communication, Ocean and Meteorological Satellite (COMS) using the Conjunction Analysis Tools by Analytical Graphics, Inc (AGI). The longitudinal drift rates of GeoSynchronous Orbit (GSO) objects were calculated, with an analytic method and they were confirmed using the Systems Tool Kit by AGI. The required monitoring area was determined from the expected drift duration and inclination of the simulated target. The optical monitoring strategy for the target area was analyzed through the orbit determination accuracy. For this purpose, the close approach of Russian satellite Raduga 1-7 to Korean COMS in 2011 was selected.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.18 no.2_spc
• /
• pp.275-289
• /
• 2020

In 2017, multimodal transportation tests for evaluating road, sea, and rail transport were performed by research institutes in the US, Spain, and the Republic of Korea. In this study, acceleration and strain data determined through road and sea tests were analyzed. It was investigated whether the load generated for each transport mode was amplified or attenuated according to the load transfer path. From the results, it was confirmed that the load transfer characteristics differed according to the transportation mode and loading path. The effects of strain determined through each test on the structural integrity of the spent nuclear fuel were also investigated. It was found that the magnitude of the measured strain had a negligible effect on the structural integrity of the spent nuclear fuel, considering its fatigue strength. The results for the acceleration and strain data analyses obtained in this study will be useful for scheduled domestic transportation tests under normal transport conditions.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.15 no.4
• /
• pp.339-344
• /
• 2009

The joint cruises of six times between Korea and China were carried out for a better understanding of the environmental and oceanographical characteristics of the Yellow Sea for 6 years from 1998 to 2003. Zooplankton samples were collected one time per year at 24 stations on 3 lines of the Yellow Sea. The aim of this study is to understand the seasonal fluctuation of zooplankton community in the Yellow Sea. There is no trend on the spatio-temporal distribution of zooplankton. Copepoda, the major taxon of the Yellow Sea, was high in distribution in the eastern part and Chaetognatha in the western part of the Yellow Sea. In this results, the dominant copepods were Calanus sinicus, Paracalanus parvus s.l., Oithona atlantica, and Corycaeus affinis during the study periods. The density fluctuation of these dominant species may be an important factor in determining the fisheries resource of the Yellow Sea.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.19 no.4
• /
• pp.277-287
• /
• 1999

Quasi-static tests such as monotonic tension and loading/unloading tension were performed to investigate the bond characteristics and the failure processes for the T-joint specimens made from fiber/epoxy composite material. Two types of specimens, each consists of two components, e. g. skin and frame. were manufactured by co-curing and secondary bonding. During the monotonic tension test, AE instrument was used to predict AE signal at the initial and middle stage of the damage propagation. The damage initiation and progression were monitored optically using m (Charge Coupled Device) camera. And the internal crack front profile was examined using ultrasonic C-scan. The results indicate that the loads representing the abrupt increase of the AE signal are within the error range of 5 percent comparing to the loads shown in the load-time curve. Also it is shown that the initiation of crack occurred in the noodle region for both co-cured and secondarily bonded specimen. The final failure occurred in the noodle region for the co-cured specimen. but at the skin/frame termination point for the secondarily bonded specimen. Based on the results, it was found that two kinds of specimen show different failure modes depending on the manufacturing methods.