• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2015년도 전력전자학술대회 논문집
• /
• pp.15-16
• /
• 2015

According to 2014 fire statistical yearbook in the National Fire Data System, a main cause of fire is electrical fire except carelessness fire. Joint/contact badness is the one of the main cause of electrical fire. Furthermore, power relays which are used in electric panel board, motor control center and automation controller, are main element of automation system in the industry field. Overload, voltage unbalance and open-phase due to joint/contact badness of terminal make electric accidents or electrical fires. In order to prevent joint/contact badness of terminal, this paper proposes a sensing circuit of chattering, tracking, arc current, voltage unbalance and open-phase etc. Some experimental tests of the proposed apparatus confirm practicality and validity of the theoretical results.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 전력전자학술대회 논문집
• /
• pp.5-6
• /
• 2014

According to 2013 fire statistical yearbook in the National Emergency Management Agency, the main cause of an electrical fire are classified to short circuit fault, overload fault, electric leakage, partial disconnection, and joint/contact badness. The occurrence factor of fire is electric arc or spark accompanied with electrical faults. Residual Current Protective Devices(RCDs) of high sensitivity type used at single phase (220V) cut off earth leakage and overload but the RCDs can not cut off electric arc or spark to be a main cause of electrical fire. To be improved on such problem, this thesis is proposed to a auxiliary control device for RCD cut off electric arc or spark.

• 상하수도학회지
• /
• 제19권2호
• /
• pp.221-227
• /
• 2005

This study has suggested the base data for decision of maintenance ranking and estimation of maintenance effect in the maintenance project of sewers as based on investigation of the defective rate in the sewer through Infiltration/Inflow(I/I) and CCTV analysis. It also analyzed the correlation between I/I and defective rate of sewer. As the result of this study, (1) Defective items of sewer was found out one item each 12.97m with an average. (2) By regression analysis, I/I has high correlation with defective rate of sewer like that $R^2$ is 0.7806. (3) The first thing in the item with bad influence on the I/I was joint badness and secondary was cross connection.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(II)
• /
• pp.552-556
• /
• 2003

Expansion joint is the absorbing structure when the upper structure of bridge have the drying shrinkage and creep from the change of temperature or construction badness. Because it has the fatigue from continuous vehicles traffic. the durability and performance is verified by the static and dynamic loading test In this study. we make the decision that T-MAT type expansion joint is applied in railway bridge and the expansion joint was tested by the criterion of Korea High Speed Rail Construction Authority.

• 한국가스학회지
• /
• 제19권1호
• /
• pp.6-11
• /
• 2015

이 논문은 자동차 타이밍벨트, 등속조인트 부트, 웨더 스트립에 적용되는 고무시스템의 손상이나 내구성 약화에 대한 사례 연구를 하는 것이 목적이다. 첫 번째 사례에서는 신품의 타이밍 벨트를 교환할 때 벨트의 내구성이 떨어진 벨트를 교환하여 타이밍 벨트와 스프로킷의 마찰작용에 의해 비정상적으로 타이밍 벨트 캔버스가 마멸된 것을 확인하였다. 두 번째 사례에서는 등속 조인트에 그리스의 밀봉역할을 하는 고무 부트의 내구성이 떨어져 경화되고 갈라져 이 틈으로 그리스가 누설된 것을 확인하였다. 세 번째 사례에서는 웨더 스트립이 화학적 변화에 따른 균열로 재료 변형이 생겨 웨더 스트립 고무가 찢어졌다. 이러한 현상은 문을 닫을 때 웨더 스트립 고무를 겹쳐지게 해 운행중 외부공기가 유입되어 미세한 소음이 발생되는 것을 확인했다.따라서, 자동차에 적용되는 고무재질의 부품들의 내구성 약화나 손상으로 인한 자동차의 고장사례가 발생하지 않도록 관리하여야 한다.