• 대한기계학회논문집B
• /
• 제37권7호
• /
• pp.675-682
• /
• 2013

전단 동축 분사기의 Inner-stage와 Outer-stage의 기체 분사 비율 변화에 따른 축방향 유동 분포 특성과 분무 분열 특성을 실험적으로 연구였다. 무차원 측정 거리를 Z/d=100까지 변화시킴에 따라 운동량 교환, 공기역학적 항력, 점성 혼합의 영향으로 완전 발달된 유동의 형태를 나타내었다. Inner-stage의 기체분사와 Outer-stage의 기체 분사의 영향은 Z/d=5 이내의 영역에서 간섭받지 않고 분무 초기에 Inner-stage에서 분사된 기체 전단력에 의해 분열됨을 파악할 수 있었으며, Z/d=10 이상의 영역에서 완전 발달된 유동으로 변화하며, 유동의 혼합이 진행됨을 관찰 할 수 있었다. Inner-stage의 운동량 플럭스 비 0.84 이내에서 Outer-stage의 운동량 플럭스 비가 증가함에 따라 SMD가 감소하는 경향을 나타내었으며, Inner-stage의 운동량 플럭스 비가 1.38 이상의 조건에서 SMD의 분포가 유사하게 나타나는 경향을 관찰할 수 있었다.

• 대한기계학회논문집B
• /
• 제24권10호
• /
• pp.1409-1416
• /
• 2000

In this study, turbulent flows in a planar combustor which has a square rib-type flame holder are numerically investigated by Large Eddy Simulation(LES). Firstly, the flow fields with or without jet injection downstream of the flame-holder are examined using uniform inlet velocity. Comparison of the present LES results with experimental one shows a good agreement. Secondly, to investigate mixing of oxidizer(air) and fuel injected behind the flame holder, the scalar-transport equation is introduced and solved. From the instantaneous flow and scalar fields, complex and intense mixing phenomena between fuel and jet are observed. It is shown that the ratio of jet to blocked air velocity is an important factor to determine the flow structure. Especially, when the ratio is large enough, the fuel jet penetrates the main vortices shed from the flame holder, resulting in significant changes in the flow and scalar fields.

• 대한기계학회논문집B
• /
• 제20권12호
• /
• pp.4053-4061
• /
• 1996

Internal flow characteristics within Y-jet atomizers and the local drop size distribution and cross-sectional averaged drop size at the outside were investigated with the liquid and air injection pressures, mixing port length of atomizers, and the liquid properties taken as parameters. To examine the effect of the liquid viscosity, glycerin-water mixtures were used in this study. The liquid viscosity plays only a minor role in determining the internal flow pattern and the spatial distribution shape of drops, but the drop sizes themselves generally increase with increasing of the liquid viscosity. An empirical correlation for the liquid discharge coefficient at the liquid port was deduced from the experimental results; the liquid discharge coefficient strongly depends on the liquid flow area at the mixing point which is proportional to the local volumetric quality(.betha.$_{Y}$), and the volumetric quality was included in the correlation. Regardless of the value of the liquid viscosity, the compressible flow through the gas port was well represented by the polytropic expansion process(k=1.2), and the mixing point pressure could be simply correlated to the aspect ratio( $l_{m}$/ $d_{m}$) of the mixing port and the air/liquid mass flow rate ratio( $W_{g}$/ $W_{f}$) as reported in the previous study.udy.udy.y.

• Applied Science and Convergence Technology
• /
• 제25권3호
• /
• pp.51-55
• /
• 2016

The surface treatment of a titanium implant is investigated with a non-thermal atmospheric pressure plasma jet. The plasma jet is generated by the injection of He and $O_2$ gas mixture with a sinusoidal driving voltage of 3 kV or more and with a driving frequency of 20 kHz. The generated plasma plume has a length up to 35 mm from the jet outlet. The wettability of 4 different titanium surfaces with plasma treatments was measured by the contact angle analysis. The water contact angles were significantly reduced especially for $O_2/He$ mixture plasma, which was explained with the optical emission spectroscopy. Consequently, plasma treatment enhances wettability of the titanium surface significantly within the operation time of tens of seconds, which is practically helpful for tooth implantation.

• 한국추진공학회지
• /
• 제22권3호
• /
• pp.53-64
• /
• 2018

본 논문에서는 초음속 유동장 내 연료 수직 분사 조건에서 분사구의 형상에 따른 연료/공기 혼합 특성을 분석하고자 하였다. 이를 위해 동일한 분사구 출구 면적과 유량 조건에 대해 수소와 공기에 대한 비반응 유동장 전산 해석을 수행하였다. 해석 결과의 검증을 위하여 자유류 마하수 3.38, 제트-자유류 운동량 플럭스비 1.4 인 평판 분사 시험을 모의하였다. 5개의 서로 다른 형상을 갖는 분사구를 이용하여 형태에 따른 박리 구간, 분사 제트의 구조의 차이를 살펴보고 분사구 후류에서 수소의 침투 높이와 수소-공기의 혼합에 따른 가연 면적에 변화를 확인함으로써 분사구 형상에 따른 연료/공기 혼합 특성을 정량적으로 비교하였다.

• 한국분무공학회지
• /
• 제16권1호
• /
• pp.44-50
• /
• 2011

An object of this study is to understand the correlation of injection characteristics and injector dimensions according to biodiesel mixture. The Injection characteristics of different types of common-rail injectors are the number of nozzle holes (5~8), jet cone angle ($146^{\circ}{\sim}153^{\circ}$), hydraulic flow rate (830~900 ml/min) injection quantity and response time. Prior to characteristic experiment, the reference injector has been selected in 6 candidates injectors under the investigation of injected quantity according to the biodiesel mixture so that injector type can be determined. The injector is used for the characteristic experiment which varied the various operating conditions including pressure 23 MPa, 80 MPa, 160 MPa, changing in injection duration 0.16 ms~1.2 ms and even mixture ratio. The result shows that the nozzle hole number and cone angle influence the injection quantity much more than nozzle hole diameter at low injection pressure and the nozzle hole diameter at high injection pressure, post injection duration.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제44회 KOSCO SYMPOSIUM 초록집
• /
• pp.77-78
• /
• 2012

To predict combustion instability in actual full-scale combustion chamber of rocket engines, air-injection test is proposed with scaling techniques. From the data, damping factors have been obtained as a function of hydraulic parameter and the data give us instability map. Two instability regions are presented and it is found that they coincide reasonably with them from hot-fire test with full-scale flow rates. Accordingly, the proposed approach can be applied cost-effectively to stability rating of jet injectors when mixing of fuel and oxidizer jets is the dominant process in instability triggering.

• 한국추진공학회지
• /
• 제9권4호
• /
• pp.48-54
• /
• 2005

액체 산소(LOx)와 Jet A-1(Jet engine fuel)을 추진제로 하는 소형 액체 로켓 연소기에서 막 냉각의 효과에 관한 실험적 연구를 수행하였다. 막 냉각제(Jet A-1과 물)는 막냉각장치를 통해 분사되도록 하였다. 막 냉각 유량 변화에 따른 연소기의 외벽온도 및 막 냉각 길이는 추진제 혼합비, 연소실 압력 및 막냉각장치의 형상 변화(분사각)에 따라 비교하였다. 막 냉각에 따른 특성속도 효율의 손실도 막 냉각제를 물과 Jet A-1을 사용하였을 경우에 대해서 각각 구하였다. 연소실 압력의 증가에 따라 노즐에서의 외벽 온도는 증가하였으나, 퍼센트 막냉각 유량이 9% 이상인 경우에 연소실에서는 거의 영향을 받지 않았다. 특성속도는 퍼센트 막냉각 유량이 9% 이상일 때 추진제 혼합비에 영향을 받지 않았다.

• 한국연소학회지
• /
• 제17권3호
• /
• pp.46-52
• /
• 2012

3D DNS is performed for n-heptane spray turbulent jet combustion. Diesel-like conditions are considered including single and multiple injections. Conditional statistics are obtained for multiple Lagrangian flame groups of sequentially evaporating fuel. Each fuel group represents the conditional statistics of an independent Lagrangian flame group. Sequentially evaporating fuel goes through different histories and residence times over the ignition delay period. Multiple flame groups are required for accurate description of combustion of a spray jet that goes through a long injection duration or multiple injections.

• 한국분무공학회지
• /
• 제1권4호
• /
• pp.24-31
• /
• 1996

This study addresses the behavior characteristics of diesel spray injected on the impinging disk with the room temperature. The models of impinging spray are the stick, the reflect and the wall jet model In the initiative of the fuel injection the impinging spray was the reflect model. because the momentum of droplets was very large. This model developed to the wall jet model according to the time approaches. On the low temperature disk the fuel film was made by the attachment of the droplets with low Weber number. The thickness of impinging spray was increased when the disk approached to the nozzle tip. Mathematical analysis for calculation with the behavior of impinging spray have to consider the reflecting effect and the influence of the fuel film.