• Journal of the Korean Institute of Landscape Architecture
• /
• v.49 no.5
• /
• pp.59-70
• /
• 2021

This study was to investigate the measurement point of root collar diameter of landscape trees in Korea. It may contribute to avoiding disputes caused by the difference in measurement criteria of root collar diameter of landscape trees between tree growers and constructors. The difference between landscape trees' root collar diameter measurement point was 3.59cm from 6cm underground to the surface and 1.35cm from 0cm to 6cm above ground. The source root collar diameter measurement point difference was larger in the basement than in the ground. The standard deviation of the root collar diameter of the landscape tree was 0.64 from 6cm underground to the surface, and the difference in standard deviation from 0cm to 6cm above ground was 0.16. The difference by measurement point of the root collar diameter was larger in the basement than in the ground. It has been proposed to set the reasonable measurement point of the landscaping tree root collar diameter at the inflection point where the standard deviation of the tree trunk diameter is the smallest in line with the size change of the standard for each root collar diameter measurement point. By tree species, Cornus officinalis Siebold & Zucc. 18cm above the ground, Chionanthus retusus Lindl. & Paxton. 12cm above the ground, Zelkova serrata (Thunb.) Makino. 12cm above the ground, Celtis sinensis Pers. 12cm above the ground, Styrax japonicus Siebold & Zucc. 10 cm above the ground, Cornus officinalis Siebold & Zucc. 10cm above the ground, Acer palmatum Thunb. ex Murray. 6cm above the ground, Ilex rotunda Thunb. 6cm above the ground, Quercus myrsmaefolia Blume. 4cm above the ground, Lagerstroemia indica L. 2cm above the ground The above heights were shown as reasonable measurement points. The difference by landscape tree root collar diameter measurement site showed that the standard deviation was small throughout the tree species, and the reasonable average measurement point with a stable slope of the deviation was 12cm or more on average. It can be said that the reasonable measurement point of the root collar diameter of a landscape tree is set at an average of 12cm above the ground. However, recognizing 30cm, which is a familiar ruler(尺) in traditional practices, is quick, It was recommended to measure at the height of 30cm from the surface for a reasonable measurement point of the root collar diameter of a landscape tree, for the uniformity of measurement standards.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.67 no.2
• /
• pp.95-110
• /
• 2022

This study was conducted to determine the extent to which climate change is expanding areas in which barley can be successfully cultivated. In 2019 and 2020, we collected data on areas that had requested certified seeds from the Korea Seed and Variety Service to determine potential cultivation areas. In addition, we surveyed the growth and yield of different types of barley in fields. Certified seeds of hulled and dehulled barley were requested by farmers across Korea from the Korea Seed and Variety Service in both years. Areas that were provided with certified seeds were considered potential barley cultivation areas. The varieties and use rates of certified seeds varied based on the barley type and region. For example, certified seeds of dehulled barley in 2019 and 2020 were not used in some areas, whereas in others, these seeds constituted 100% of the seeds sown for barley crops. In 2019 and 2020, the average sowing days in Korea were from October 17 to November 9 for dehulled barley, October 26 to November 13 for hulled barley, October 19 to November 5 for malting barley, and October 3 to November 1 for naked oats. Thus, the sowing days of the barley types varied depending on the area and year they were used. For example, in the case of hulled barley in Jeonnam, some farmers sowed until December 12. The yield per 10 a of barley cultivation was typically higher in the main production areas than in the cultivation limit areas. In extreme cases, harvest was impossible in some cultivation limited areas, such as Gangwon-do. Based on the current 20-year January minimum average temperature (JMAT) in Korea (2002-2021), climate change scenarios suggest that barley cultivation is feasible, provided that the minimum temperature in January is no lower than -10℃, -8℃, and -4℃ for hulled barley, dehulled barley, and for malting barley and naked oats, respectively. Additionally, cultivation of barley across South Korea seems feasible based on data on certified barley seeds by area. Although both JMAT and certified seed data suggest that barley cultivation across Korea is feasible, our survey results of barley growth and yield showed that harvest was impossible in certain cultivation areas, such as Gangwon-do. Therefore, climate change scenarios related to the cultivation limits of different barley types need to be re-estimated by factoring in survey data on the growth and yield of crops within those cultivation areas.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.7
• /
• pp.429-437
• /
• 2020

This study is aimed at exploring the current state, necessity and activation of curriculum related to image making program in domestic colleges. To achieve this, an empirical survey was carried out to college students to provide basic data for the development of image making education program in the college curriculum as a measure to guide job interviews with them and improve interpersonal skills of employees-to-be. To achieve this, a survey was carried out to 400 college students in Gwangju and Jeonnam areas. The analysis was conducted to verify the collected data using SPSS v. 21.0 through the process of data coding and data cleaning. The results are as follows. First, the necessity of image making program curriculum showed that they needed the image making program in the college curriculum, the image making program curriculum to get a job and manage an image of employees-to-be after graduation, and other people's help to figure out the images objectively. Second, the educational importance of image making program showed that attitude (behavior) was the highest, followed by manners & greeting, look, speech, relationship, clothes, hairstyle, and makeup. In terms of the important educational factors of image making program, look was the highest, followed by makeup, hairstyle, attitude (behavior), relationship, speech, clothes, and manners & greeting, which look was the most important. Third, the educational influence of image making program showed that the influence on employment was the highest, followed by the influence on relationship, and the influence on life. Fourth, the educational activation of image making program showed that the appropriate educational time for image making program they want was from the second year. Education hours they want were once a week for one semester. And the curriculum they want was liberal arts or an optional course of liberal arts. In terms of image making program-related curriculum contents, manner & greeting was the highest, followed by makeup & coordination, job fair, education to acquire a skill qualification, and training for domestic companies, which their biggest wish was manner & greeting. And image making program leaders they want were major professors. In terms of image making program-related education, speech or voice was the highest, followed by education to analyze communication, education to analyze and practice matching hairstyles and makeup, Education on corporate interviews, and education on walking or posture correction, which their biggest wish was speech or voice and education to analyze communication.

• 지역과문화
• /
• v.7 no.2
• /
• pp.173-202
• /
• 2020

This study aims to enhance the family-friendliness of the region by examining the relationship between family relations and the community environment, and objectively comparing the local environment surrounding the family. To this end, we reviewed the areas of socio-cultural and economic sectors that affect the family relationship satisfaction, and in particular, analyzed the trend of changes in regional index by utilizing the Korean Family Happiness Composite Index (KFHCI) developed as a community indicators. This index utilizes community indicators published in the National Statistical Portal's "e-Region indicators," and these variables are related to family relationship satisfaction. Therefore, this study compared the seven areas of the Family Happiness Composite Index (Population Family, Health Culture, Education, Income Consumption, Employment Labor, Housing Transportation, Environment and Social Integration) by region, and examined the trends for 10 years. According to the study, the average score of KFHCI's entire region was rising from 2008 to 2018. Overall, the community environment that affects family relationship satisfaction is also improving. The regions belonging to the upper level were Jeonnam, Gangwon, Chungnam, Jeonbuk, and Gyeongbuk. Areas belonging to the lower level are Seoul, Busan, Daegu, Incheon, and Gwangju. In almost sectors, the lower-level regions did not have sufficient physical infrastructure compared to population density and over-density, and improved little by little, but not enough to reflect the needs of local people and improve the quality of life. In the future, we should develop more regular and complementary indicators to develop customized policies for each region that can improve the quality of family relationships. It will also be necessary to study the impact of each index field when a socioeconomic crisis occurs due to social disasters, and try to change indicators

• Journal of Ginseng Culture
• /
• v.5
• /
• pp.52-76
• /
• 2023

This article focuses on changes in the ginseng industry in the 1930s in areas other than the Government Contract Cultivation (GCC) zones. A major characteristic of the ginseng industry in the 1930s was the rapid increase in the area covered by ginseng gardens: the area was about 212 ha in 1929 and 252 ha in 1930 and 1931 but soared to around 441 ha in 1938. This occurred because the non-GCC areas increased significantly during this period. Until the early 1930s, the ratio of GCC to non-GCC areas was 70:30. By the late 1930s, however, the ratio had changed to 53:47. The reason for this change was that the area of the newly established ginseng gardens in the GCC zones had decreased, while that of the non-GCC ginseng gardens had steadily increased. Due to the Japanese invasion of China, China boycotted red ginseng, and exports were sluggish, so the GCC areas were reduced. On the other hand, the non-GCC ginseng gardens were not affected, and the area they covered steadily increased. As a result, in the 1930s, the ginseng industry outside of the GCC areas grew rapidly. The region that led the growth of the ginseng industry outside of the GCC zone was Jeonbuk. By the late 1930s, Jeonbuk dominated the other provinces and accounted for more than 50% of the non-GCC farming zone. Gyeongbuk and Gangwon-do followed Jeonbuk in terms of ginseng cultivation areas. While Gyeonggi-do, Gyeongnam, and Chungbuk were also active in ginseng cultivation, Jeonnam and Chungnam were not active. In the 1930s, the growth of the ginseng industry outside of the GCC zones was driven by the efforts of ginseng farmers and the support of local governments. An examination of Yecheon-gun in Gyeongbuk, Ganghwa-gun in Gyeonggi, and Jecheon-gun in Chungcheongbuk-do showed that ginseng farmers organized cooperatives as the ginseng industry steadily developed in these regions, and these cooperatives worked systematically to cultivate and sell ginseng. In the case of Ganghwa-gun, activities were carried out to incorporate the GCC zone. The Deoksan Ginseng Association in Jecheon-gun determined that financing for cultivation was key and requested subsidies from the provincial government. Administrative authorities also supported the activities of the ginseng farmers. The activities of the farmers and the support of the administrative authorities together led to the growth of the ginseng industry during this period.

• Korean journal of applied entomology
• /
• v.61 no.3
• /
• pp.399-408
• /
• 2022

There has been much debate on the morphometric divergence between the recently identified Apis cerana koreana and Apis cerana honey bees. The aim of this study was to obtain phenotypic information that can be used to compare A. c. koreana data with other A. cerana subspecies data from open resources and determine breeding results on the basis of morphometric traits. To differentiate A. c. koreana, we investigated 22 classic morphological characteristics; royal jelly secretion; and the weight of workers, queens, and drones of A. c. koreana bred in Korea. To define the selection results, we used the geometric morphometric method. The artificially selected A. c. koreana secreted significantly more royal jelly (1.18 times) than the naturally selected A. c. koreana, which positively influenced the health of the colonies. These honey bees were identified more clearly with the geometric morphometric method than with the classic morphometric method, which is traditionally used to determine the subspecies. Large trends were noted for A. c. koreana on the basis of our results and literature from the 1980s regarding A. cerana sizes in Korea (tarsal index, length of forewing, and cubital index were measured). The cluster analysis revealed the proximity of A. c. koreana, A. cerana in China, and A. c. indica on the basis of eight classic characters, which, perhaps, relay the origin of the honey bees. The results of this study defined the morphometric responses of A. c. koreana honey bees to geographic isolation, climate change, and selection, which are important to identify, protect, and preserve honey bee stock in Korea.

• The Journal of Engineering Geology
• /
• v.33 no.3
• /
• pp.389-401
• /
• 2023

Climate, weather, insolation (solar radiation), and solar energy in major cities of Tajikistan were investigated prior to construction of infrastructure for the Dushanbe Solar Station. In Dushanbe city there was a 70% probability of sunny days from May 16 to October 23, a period of 5.2 months. August had the most sunny days of in the year, with 99% probability of a sunny, the cloudiest month was February with a 41% chance of being sunny. In major cities of the Sughd and Gorno-Badakhshan states, the average number of cloudy days per month was ~3.3, with Dzhauz having 53 day and Fedchnko Glacier 79 days. For the 18 major cities of Tajikistan, the average annual total solar radiation was 2,429 W/m², and the average monthly solar radiation was 202 W/m². The city with the lowest annual total and monthly average solar radiation was Shartuz in Sughd state, with values ~2.7% less than the national average. The cities with the highest annual total and monthly average solar radiation were Khorog and Jirgatol in Gorno-Badakhshan state, with values ~10% above the national average. The daily average incident shortwave solar energy in the cities Dushanbe, Karakul, and Jirgatol was ~7.8 kWh per 2.4 m² during summer (May-August), and 2.7 kWh during winter (November-February), or ~35% that of summer.

• Journal of Korea Water Resources Association
• /
• v.56 no.2
• /
• pp.115-124
• /
• 2023

Currently, as the frequency of extreme weather events increases, the scale of damage increases when extreme weather events occur. This has been providing forecast information by investing a lot of time and resources to predict rainfall from the past. However, this information is difficult for non-experts to understand, and it does not include information on how much damage occurs when extreme weather events occur. Therefore, in this study, a risk matrix based on heavy rain damage rating was presented by using the impact forecasting standard through the creation of a risk matrix presented for the first time in the UK. First, through correlation analysis between rainfall data and damage data, variables necessary for risk matrix creation are selected, and PERCENTILE (25%, 75%, 90%, 95%) and JNBC (Jenks Natural Breaks Classification) techniques suggested in previous studies are used. Therefore, a rating standard according to rainfall and damage was calculated, and two rating standards were synthesized to present one standard. As a result of the analysis, in the case of the number of households affected by the disaster, PERCENTILE showed the highest distribution than JNBC in the Yeongsan River and Seomjin River basins where the most damage occurred, and similar results were shown in the Chungcheong-do area. Looking at the results of rainfall grading, JNBC's grade was higher than PERCENTILE's, and the highest grade was shown especially in Jeolla-do and Chungcheong-do. In addition, when comparing with the current status of heavy rain warnings in the affected area, it can be confirmed that JNBC is similar. In the risk matrix results, it was confirmed that JNBC replicated better than PERCENTILE in Sejong, Daejeon, Chungnam, Chungbuk, Gwangju, Jeonnam, and Jeonbuk regions, which suffered the most damage.

• Journal of Korean Society of Forest Science
• /
• v.112 no.4
• /
• pp.417-425
• /
• 2023

The aim of this study was to derive stem taper equations for Quercus acuta, one of main evergreen broad-leaved tree species found in warm temperate regions, and to prepare a stem volume table using those stem taper equations. A total of 688 individual trees were used in the analysis, which were collected from Jeonnam-do, Gyeongnam-do, and Jeju-do. The stem taper models applied to derive the stem curve pattern were the Max and Burkhart, Kozak, and Lee models. Among the three stem taper models, the best explanation of the stem curve shape of Q. acuta was found to be given by the Kozak model, which showed a fitness index of 0.9583, bias of 0.0352, percentage of estimated standard error of 1.1439, and mean absolute deviation of 0.6751. Thus, the stem taper of Q. acuta was estimated using the Kozak model. Moreover,thestemvolumecalculationwasperforme d by applying the Smalian formula to the diameter and height of each stem interval. In addition, an analysis of variance (ANOVA) was conducted to compare the two existing Q. acuta stem volume tables (2007 and 2010) and the newly created stem volume table (2023). This analysis revealed that the stem volume table constructed in the Wando region in 2007 included about twice as much as the stem volume tables constructed in 2010 and 2023. The stem volume table (2023) developed in this study is not only based on the regional collection range and number of utilized trees but also on a sound scientific basis. Therefore, it can be used at the national level as an official stem volume table for Q. acuta.

• Food Science and Preservation
• /
• v.30 no.2
• /
• pp.272-286
• /
• 2023

Garlic sprouts can provide data on functional and food processing materials. This study compared the leaves, bulbs, and roots of garlic sprouts grown on smart farms during two growth periods (20 and 25 days). In addition, data for garlic bulbs grown in open fields were presented as reference materials. All garlic sprouts' total free sugar content decreased as the growth period increased. All plant parts' total organic acid content decreased as the growth period progressed, except for the root section. Potassium, phosphorus, and sulfur content increased during growth in all parts of the garlic sprouts. Alliin content decreased in all parts of the plant over time, whereas thiosulfinate content increased in the roots but decreased in the leaves and bulbs. Total polyphenol content increased in all parts of the plant during the growth period, except for the bulb, whereas the flavonoid content did not change significantly over time. The 2,2-diphenyl-1-picrylhydrazy (DPPH) and 2,2'-azinobis (3-ethylben-zothiazoline 6-sulfonate) (ABTS) free radical scavenging activities, as well as the superoxide dismutase (SOD)-like activity of garlic sprouts were 37.45-65.47%, 59.12-89.81%, and 89.52-98.59%, respectively. These activities tend to decrease during the growth period. Here, we showed that garlic sprouts have higher levels of functional substances and physiological activities than general garlic sprouts. It was also determined that a growth period of 20 days was suitable for garlic sprouts. Data for research on functional and food-processing materials can be obtained by analyzing garlic sprouts produced by smart farms.